metal polishing used for sale

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

Metal detector

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new

Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Safeline Model: Signature Metal detector Serial: 48597 stainless frame, belt dimensions 1800mm x 220mm, pnuematic reject, aperture 200mm x 100mm

Technical data: -Saw blade diameter 470 mm -Adjustable miter left + right up to 30 ° -Digital angle display -Cutting capacity 90 ° round 140 mm square 110 mm rectangle 290 x 70 mm round 45 ° 140 mm square 110 mm rectangle 190 x 70 mm at 30 ° round 130 mm -Sägeblattdurchm cutting speeds. 400 mm approx. 22.5 + 45 m / min -Sägeblattdurchm cutting speeds. 470 mm approx. 25 + 50 m / min -Hydr. Horizontal + vertical material clamp -Drive 400 V / 4 kW -Feeding speed of the saw blade, hydr. infinitely variable -Microsprüh - coolant system - space requirement approx. B H 1200 x 1950 x D 1700 mm -Weight 850 kg

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Key data: 40

Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable:     70mm Punching force:        80T Capacity Ø x thickness:40 x 20 mm Cutting force:         150T Throat:                500mm Capacity L profile:    130 x 130 x 13 mm Power:                 9kW Length:                2.200 mm  Width:                 1.200 mm  Height:                2.200 mm  Weight:                2.800 kg

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

We offer you here a sheet metal cleaning machine from Jeros, for plates 60x80. If you have any questions or questions, we are happy to provide you with Delivery at an additional cost possible

- Schleifband: 200x150 mm - Geschwindigkeit: 18+37m/sec - Volumen: 650x1160x650 mm - Motor: S6/400V 4,0 PS - Gewicht: 125,0 kg Beschreibung: - optimales Schleifergebnis durch hohe Bandgeschwindigkeit - einfacher und schneller Bandwechsel möglich - schwenkbares Schleifaggregat mit Schnellverstellung - kraftvoller Antrieb für kräftigen Durchzug - Lauffläche mit Grafitunterlage zur Reibungsminimierung Lieferumfang: - Untergestell

- Schleifband: 2000x75 mm - Geschwindigkeit: 34m/sec. - Volumen: 750x1160x550 mm - Motor: S6/400V 3,0 PS - Gewicht: 85,0 kg Beschreibeung: - optimales Schleifergebnis durch hohe Bandgeschwindigkeit - einfacher und schneller Bandwechsel möglich - schwenkbares Schleifaggregat mit Schnellverstellung - kraftvoller Antrieb für kräftigen Durchzug - Lauffläche mit Grafitunterlage zur Reibungsminimierung - Laufgeschwnidigkeit 34 m / sec Lieferumfang: - Untergestell

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Safeline Metal Detector Model: Signature Serial: 53973 Stainless Frame, belt dimensions 1800mm x 300mm, aperture 300mm x 120mm, pneumatic push arm reject with reject bin, 3Ph

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Ward Bekker Metal detector checkweigher Model: ACW25 Serial: 10012261 Stainless, Twin lane metal detector checkweigher, overall length 3400mm, belt width 75mm, max product height 100mm,

Post turning machine make FEINBAU type PM 1-HUBFabr. -No: 3473Tip width: 165 mmTop height: 110 mmgr. circulation diameter over bed: 220 mmover cross slide: 110 mmSpindle bore: 23 mm3 spindle speeds by directly on theSpindle drive motor: 690/1380/2850 rpm.Drive motor 380 V,: 690/1380/2850 rpm.: 0.22 / 0.37 / 0.5 kWSpace required: 400 x 830 x 1170 mmWeight: 160 kgused, from a service release, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret Lathe Fabr. HARDINGE Type HCT 3Machine -No: EC 2270Top height: 170 mmTurning length: 240 mm16 spindle speeds: 125 - 3000 rpm.stepless slide feed: 0 - 100 mm / min.Drive power: 1.5 hpExternal dimensions approx: 1900 x 800 x 1600 mmWith- Collet device- Three-jaw lathe chuck 125 mm- 6-fold revolver slide- 8-fold revolver stop- Abstechschlitten- 48 collets up to max. 28.5 mm- Cooling device- R + L runvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe and flange lathe make WISCH type RA 8-36Mash. -No: 9-3430light construction site machineTurning diameter: 80 - 400 mmClamping diameter: 80 - 365 mmminute Clamping length: 190 mmTool speeds: 11.3 / 22.6 rpm.Radial feed: by hand / by camMax. Travel: 95 mmFeed rates: 0.166 / 0.33 mm / rev.Axial feed: by handMax. Travel: 55 mmMax. Turning length for external turning work: 40 mmMax. Turning length for internal turning: 30 mmDrive power: 0.8 / 1.2 kWSupply voltage: 380 V / 50 HzDimensions approx L x W: 775 x 760 mmHeight above center (without carrying hook): 210 mmHeight below center: 320 mmTotal height: 530 mmWeight approx: 74 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m. morexa0xa0 steel holders- Three - jaw chuck Forkhardt 200 mm Drm.- Tool cabinet with contentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net a ...

Dimensions: 1,500 x 600 mm, through width x height: 1,300 x 300 mm, working width: 1,000 mm, weight: approx. 260 kg, with distance frame and control electronics 650/2 S-2, Y.O.M.: 2015 - still unused and originally packaged

Table Universal after Lathe Fabr. SEE Type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- clamping clawused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal turning machine make LIEBER type SS / VO / EVYear of construction 1974 with movable upper bed and electrical preselection controlTechnical specifications:Center height: 500 mmTip width: 2500 mmTurning diameter over bed: 1000 mmTurning diameter over cross slide: 750 mmSwing diameter in the crank: 1650 mmCamber length infinitely adjustable: 0 - 1500 mmSpindle bore: 101 mm12 spindle speeds: 6 - 600 rpm.Bed width: 640 mmBed slide guide length: 1020 mmSlide gate width: 350 mmUpper support width: 250 mmUpper support path: 250 mm132 longitudinal feeds: 0,051 - 4,876 mm / min.132 flat feeds: 0.027 - 2.688 mm / min.Gewindevorschübe: 66metric threads: 0,785 - 24 mmWW thread: 1.5 - 46 Gg / 1 Tailstock: MK 6Motor power: 15 kWExternal machine approx: 5000 x 2200 x 2300 mmWith- sliding bed- electrical preselection control- Faceplate Drm. 1600 mm- Leadscrew is missingusedPrice on request.Deliver ...

Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Metal lathe make MYFORD type Super 7Technical specifications:Distance between centers: 330 mmTip height: 84 mmBed width: 76 mmSpindle bore: 15.5 mmTurning diameter over support: 98 mmInfeed per division: 0.02 mm12 spindle speeds: 25 - 2150 mmThread pitches metric: 0.2 - 3.5 mmThread pitches inch: 8 - 28 Gg / 1 Feeds: 0.1 - 0.25 mm / rev.Fine feeds: 0.009 - 0.004 mmDrive power: 0.9 / 0.52 kWWeight approx: 53 kgExternal dimensions approx: 910 x 660 x 400 mmWith- Four-jaw lathe chuck- Set of change gears- steel holder- drill chuck- mitl. Center point- Tapered roller bearings in the main spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding.  ...

Metal lathe make TOS type SV 18 RAMachine -No: 018100830833, year of construction approx. 1980Technical specifications:Distance between centers: 1000 mmCenter height: 180 mmCircumferential diameter over bed: 380 mmCircumference diameter over support: 215 mmSpindle bore: 41 mmSpeed range: 14 - 2800 rpm.Longitudinal feeds: 0.02 - 5.6 mm / revFlat feeds: 0.01 - 2.8 mm / revmetric pitches: 0.2 - 140Inch thread: 1/5 - 140/1 DP thread: 1 - 224 DFModule thread: 0.2 - 70 M.Drive power: 6.0 kWDimensions approx: 2200 x 1000 x 1400 mmWeight approx: 1800 kgWith- Steel holder- three-jaw lathe chuck- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Metal lathe make GRAZIANO type SAG 210Technical specifications:Distance between centers: 1000 mmCenter height: 210 mmCircumferential diameter over cross slide: 268 mmCircumferential diameter in the crank: 580 mmSpindle bore: 57 mmBed width: 330 mmLength of the offset with the driving flange: 316 mm24 spindle speeds: 38 - 2000 rpm.80 longitudinal feeds: 0.020 - 0.44 mm80 cross feeds: 0.010 - 0.22 mm40 WW thread: 46 - 340 metric pitches: 92 - 640 module thread: 0.25 - 2.875 mod.Leadscrew pitch: 3/8 Rapid traverse: 6000 mm / minDrive power: 7.5 kWDimensions: 2700 x 1400 x 1370 mmWeight approx: 2270 kgWith- three-jaw lathe chuck- Multifix steel holder with several inserts- fixed bezel- moving center point- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Safeline Model: Signature Metal detector Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Metal lathe make MEXPOL / PONAR type TUR 50 SMachine -No: 45499 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 250 mmCircumferential diameter over bed: 500 mmCircumferential diameter over support: 300 mmSpindle bore: 80 mmShort cone: size 836 spindle speeds: 18 - 1800 rpm.42 feeds lengthways: 0.64 - 26 mmacross: 0.32 - 13 mmMetric thread pitches: 42Inch thread: 42Diametrical pitch thread: 42Machine weight: 2720 kgRequired space approx .: 2500 x 1300 x 1630 mmWith- Acu-Rite digital display- three-jaw lathe chuck- faceplate- 4-way steel holder- 1 steady rest (fixed)- 1 moving center punchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Lock Metal detector Model: Met30+ Stainless frame, slat chain belt, belt dimensions 1900mm x 80mm, aperture 140mm x 300mm, 3Ph

Thermo Scientific Metal detector Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile

Punching nibbling machine

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000