mechanical used for sale

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5   - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown   Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss ‪DIN 10‬: 500–25.000 min–1 Speeds infinitely adjustable Mobile   Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Aspirator Rachel with fan, 11 kW Chip feeding screw Pipes Built in 1995 L x W x H: 150 x 120 x 400 cm Weight approx. 2500 kg The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

A 208 liter barrel with gear oil is offered. Manufacturer Totoal Type: Dynatrans MPV (old name Transmission WB) Applications: For lubrication of mechanical gearboxes, converters, hydrostatic transmissions, hydraulic systems, power steering, Oil bath clutches and oil bath brakes. Can be used in gearboxes when a gear oil according to API GL-4 is required in SAE class 10W-30 or 80W. Can be used in hydraulic systems when an HVLPD oil (DIN 51524-3) is required in ISO VG 68. characteristics International Specifications: API GL-4 Shares: Massey Ferguson CMS M 1145, M 1143 Volvo CE WB 101 John Deere: JDM J20C ZF TE-ML 03E/ 03L/ 05F/ 06P/ 17E/ 21F TotalEnergies recommends the use of: McCormick HTX Valtra G2-08 Ford M2C 134D and FNHA 2C 201.0 Case MS 1206/ 1207/ 1209 CNH MAT 3505/ 3509/ 3525/ 3526/ 3540 New Holland NH 410B / NH 410C Massey Ferguson CSM M 1135/ M1141  ...

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW

Built in 1995 Size max 450 x 350 x 280 mm min 140 x 100 x 80 mm Mechanical speed 7.000 c/h ; working condition

The Fryma machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. The homogenizer is composed of heating and cooling with steam, water or thermal oil incl. stirrer. Filling volume: max. 400 liters, min. 105 liters.

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions:  ...

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions:  ...

Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: PROTO TRAK A.G.E. 3 Technical data Number of axis total: 3 Table length: 1270 mm Table width: 320 mm Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 610 mm Table load max.: 600 kg Distance from vertical spindle to table: 610 mm Distance from spindle axis to slide ways: 480 mm Taper in spindle: 40 ISO Spindle speeds: number (steps): 2 from: 5 rpm up to: 3600 rpm Swivel range Vertical milling head: -90 / +90 ° Feeds (X, Y, Z): 5 - 3800 mm/min Vertical quill travel: 120 mm Quill feed speed: 0.04 / 0.08 / 0.15 mm/r Drill capacity in steel: 35 mm Threat cutting in steel M: 36 Milling capacity in steel: 80 - 150 cm3/min Boringout: 120 mm Voltage 50 Hz 3x: 415 Volt Milling ...

Technical data: - working width 300 mm- 2 x glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 2 x 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rollers made of stainless steel- mechanical height adjustment of the upper glue application roller- mechanic digital display of the passage height- CE conformity

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

Sheet thickness: 8,00 mm void: 0 Table length: 2100 mm Table width: 0 mm Knife length: 2100 mm Maximum sheet thickness:        8mm Max. cutting length:            2.100mm Strokes on full length:         34mm Cutting angle:                  1,30 ° Length backgauge:               1.000mm Number of down holders:         13 Control:                        Touchscreen  Operated mechanical or hydraulic:Hydraulic  Power:                          15kW Length:                         2.680 mm  Width:& ...

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Description Brand Garbin Model 43 DX UMI / 83 LI ID 7083 Status Active Price 560 € + VAT Year of manufacture 2006 Location Oradea, Romania - Capacity: 4 trays, 432?343mm - perfect for cooking a variety of bakery products, semi-cooked food, as well as, fish, meat and vegetable products. - Size: Length - 600mm, depth - 595 mm height - 560 mm. - Full stainless steel casing, mechanical control system. Details Fermenter: - 8 trays capacity - 220-230 V voltaje - 1,5 Kw power consumption - Size: Length: 600mm depth: 630 mm height 915 mm - Weight: 38 kg ExWorks Oradea, price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. ( ...

Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:        25mm Max. cutting length:            3.070mm Strokes on full length:         7mm Strokes in short 1000 length:   12 Cutting angle:                  0,5 - 2,5 ° Length backgauge:               1.000mm Number of down holders:         15 Control:                        Siemens  Safety guides:                  Sick  Operated mechanical or hydraulic:hydraulic  Power:                          45kW Length:&nb ...

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

Capacity: 100 t Folding length: 3100 mm CNC Brand: Safan CNC Model: EC 20 Touch Screen SAFAN DARLEY - E Brake 100 - 3100 CNC Servo Mechanical Pressbrake 3100 x 100 T MACH - ID 6347 Make: SAFAN DARLEY Type: E Brake 100 - 3100 Control: EC 20 TOUCH SCREEN YOP: 2017 Max. bending length    3.100 mm Distance between column     3.100 mm Max. pressing force    100 T Dis. Beam – Table       590 mm Beam stroke         300 mm Adjustment X-Axis back gauge     1.000 mm Number of controlled axis          X-Y1-Y2-Z1-Z2 Control        EC10 - 2D Power          11 kW Dimensions Length         4.000 mm Width           2.300 mm Heigh ...

Compressor black RS 1015 type Rota Nova NK 60 5.5-11 kW / 7.5-15 HP 1.5 m3 / min Ssszy0 L x W x H: 110 x 80 x 100 cm Weight 450 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Capacity: 35 t Folding length: 1200 mm CNC Brand: Delem TRUMPF - TrumaBend E35 Servo Mechanical Pressbrake 1250 x 35 Ton MACH - ID 6327 Make: TRUMPF Type: TrumaBend E35 Control: Delem YOP: 2000 Max. bending length    1.200 mm Distance between column    900 mm Max. pressing force      35 T Beam stroke      100 mm Adjustment X-Axis back gauge     500 mm Number of controlled axis      3 Control      DELEM Power        2 x 7.5 kW Dimensions Length       1.500 mm Width         1.500 mm Height        2.100 mm Weight       3.100 kg

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3100 mm MACH-id    5481 MAKE        Safan  TYPE          HVR 310-6 YOP             1994 SPECIFICATIONS Maximum sheet thickness     6 mm Max. cutting length        3100 mm Strokes on full length       45 mm Strokes in short    1000  length    90 Cutting angle      0.5 - 2 ° Length backgauge      1000 mm Number off down holders       17b Approach speed           125 mm/sec. Operated mechanical or hydraulic        Hydraulic Power         11 kW DIMENSIONS Length      ...

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12