meat mincer used for sale

Carnitech mobile s/s lifter for 200 liter meat bins, type: L25, id: 11-5213, year of construction: 2011, 3x 400 V, 0.75 kW, lifting height: 1550 mm, total dimensions: 1500 mm x 950 mm x 2500 mm.

Berief tilting device for meat bins, type: SwingLoader, serial number: 08348.05.01.00, year of construction: 2020.

NON lifter for 200 liter meat bins, type: 016/250, serial number: 016N161, year of construction: 1980, lifthing height: 1900 mm, total dimensions: 1360 mm x 1000 mm x 2700 mm.

S/s lifter for 200 liter meat bins, lifting height: 2000 mm, total dimensions: 1400 mm x 1000 mm x 3300 mm.

Itec mobile lifter for 200 liter meat bins, type: 27000, serial number: 0495, year of construction: 03/08, 400 V, 3 Ph, 50 Hz, 1.1 kW, lifthing height: 1300 mm, total dimensions: 1300 mm x 1400 mm x 3300 mm.

S/s lifter for 200 liter meat bins, lifthing height: 2300 mm, total dimensions: 500 mm x 600 mm x 3100 mm.

Tilting

Screwloader Meat Analyzer CFS Multitrack TS Type Conveyors / Screws / Elevators Height 2300 Width 1800 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation 2-3 weeks Working belt dimentions 400 mm

With pre-cutter

Spare parts included

Freezer cutter Rühle GFR 450 in a very good used and functional condition. Completely made of stainless steel, guillotine technology, cutting material temperature down to -20°C, capacity up to 3,000 kg / h. Holding device for 200 l cutter trolley. Throughput width 61 cm, throughput height 33 cm. Dimensions W/D/H 80/230/140 cm. Connection values 400 volts, 7.2 kW, 12.3 A. Workshop tested, immediately ready for use. More on request.

1500 Watt

Portioner for halt grinder, ex table

Length: 550mm, width: 1000mm, height: 1460mm, was hardly used.

Cutting capacity: 130 cuts/min, operating pressure: 7-10bar, connected load: 19kW, length: 1260mm, width: 2059mm, height: 1845-1895mm, weight: 1.5t, with documentation and frame for the molds, an on-site inspection is possible, but not under power.

Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site.

for frozen meat blocks

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 230/400 volts / 50 Hz / 1.2/0.68 A / 0.270 kW Cutting thickness adjustment without offshoot: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knives including original knife grinder including original operating instructions Power current / 16A CEE plug Year of construction: 2006 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment without offshoot: 0 to 24 mm Knife diameter: 330 mm Stainless steel knives Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size angular: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Footprint (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

REF-1898 SECTOR MATIC AUTOMATIC MEAT SLICER Automatic meat fillet slicing machine. Manufacturer: C.R.M. Costruzioni Revisioni Meccaniche S.r.l. Model: Sector Matic 300. Power: 5.5kW. 400 V. Machine number: 220. Year: 06/1999. Dimensions: 2,500mm length, 450mm belt width, overall width 1,100mm, height 1,500mm.

-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...

Guillotine for slicing frozen meat with a capacity of 8000 kg. per hour It can cut molds of frozen meat with a temperature of -15°C to -3°C without defrosting the product during processing. The processed product is unloaded directly into Laska type carts. Technical parameters: Models IB – 4 IB – 8 Productivity- kg / hour up to 4000 up to 8000 Capacity kW 15 15 Max. weight of pieces gr. 200 450 Min. block temperature: -18 °C -15 °C Block dimensions mm. 600 / 400 /200 Machine dimensions: length 1400 width 1130 height 1680 Weight of the machine kg. 720

Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Fully automatic slicer / packaging line with marking system Cutting / Depositing / Packaging / Weighing / Marking KUCHLER S.A.M. PX3 Specifications: Type slicer: SAM PX3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Weighing & Labeling Unit: Mettler Toledo PAZ UC-GTT-M, 3/6 kg 400 volts / 50 Hz / 3.8 A Year of construction of cold cuts & packaging line: 2018 Year of construction of weighing & labelling unit: 2018 Film size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, teflon coated including original knife grinder including original knife lifter including original operating instructions Original price in this version approx. EUR 52.000, ...

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2009 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated including original knife grinder including original knife lifter Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Handtmann Sausage linking machine (2007) Good condition

The machine is adapted to crush frozen meat blocks to a temperature of -20 degrees Manufacturer: Magurit Model: 545 Height: 1800 mm Width: 1100 mm Length: 2590 mm Electric power supply: 400V 50Hz 3N Power: 5.5kW Efficiency: 5t

Slicer Manconi 250 V K-VD, Cutting blade 25cm diameter, with grinder, Connection 230V, year of construction 2004, Dimensions LxWxH approx. 58x60x44cm, weight approx. 35kg, good used condition, works perfectly

Product number: 2462B Type: KB428 Serial number: C722 Block size: max 530 x 530 mm Power: 3 x 380V, 50Hz, 22kW Dimensions:950 x 1450 x 1900 mm 1 speed on cutting drum Product bottom exit in 200 litre tote bins

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Product number: 2498 Type: MLF600 Serial number: 723 Year of construction: 2000 Belt width: 600 mm Capacity: max 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 Bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2600 x 1200 x 2100 mm Weight: 1782 kg

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment

Name: Flex Denester Serial number: 4049912776 Year of construction: 05/10 Manufacturer: GEA Food Solutions GmbH Performance: 120 servings per minute Designation: curved band Serial number: 4040912635 Year of construction: 2004 Manufacturer: GEA Food Solutions GmbH Designation: Inline Loader Serial number: 4040650030 Manufacturer: GEA Food Solutions GmbH Performance: 120 servings per minute Condition: functional Availability: as of now Power: 120 servings/minute product height: 80 mm

GEA PowerGrind Grinder 280 Robust industrial grinder Suitable for coarse and fine grinding of fresh and frozen meat. Applications include ground meat for formed products, sausages, minced meat, pet food and ground frozen vegetables.

Seydelmann AU200 AC6 Grinder High throughput grinder with extended hopper 121 Kw 2016 machine, in lovely condition.

Slicer Bizerba VS 12 C F, large carriage, Ceraclean surface (easier to clean), with grinder, Connection 400V, built in 2019, with new bearings and drive belts, Dimensions LxWxH approx. 70x67x50cm, weight approx. 59kg, with signs of wear, but runs flawlessly

MEATBALLS FORMER STORK TITAN B.V, MODEL: TVM 004 Technical description: Number of heads: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1500 x 2300 x 2680 mm Load lifter: Optional

MEATBALLS FORMER 1 HEAD, MENZING TITAN TYPE: VM 005 Technical description: Serial number: 641490 Number of heads: 1 Diaphragm diameter: ?70 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 1450 x 2170 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm