meat cutter used for sale

Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.

Stephan MCHD 30-II micro cutter

Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Aut. Keyway and Slot Milling Machine Fabr. RUWO HAHNDORFType AF 56 machine -No: 63/2445/1 year of construction 1963Groove length: 350/400 mmGroove width up to: 50 mmGroove depth: 15 - 40 mmDepth feed: 0.1 - 0.5 mmDivision of the delivery: 0.1 mmForm feed: 50/80/120 mm / min7 spindle speeds: 180 - 1000 rpm.gr. shaft diameter: 170/330 mmTool holder: MK 2Drive power: 1.1 / 0.6 hpDrive power of the side feed: 0.17 hpDimensions L x W x H: 1000 x 500 x 1100 mmWeight approx: 270 kgWith- Cooling device- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Groove milling machine Fab. HURTH Type LFV 3Masch. -No: 3566 estimated year of construction 1963Groove width max.30.35 mmTravel X: 550 mmTravel Y: 300 mmTravel distance Z: 400 mmSpindle mount ISO: SK 40Milling carriage travel: 240 mmDepth feed screw stroke: 0-110 mmTable size: 300 x 1200 mmTable width: 350 mmProjection: 415 mm8 spindle speeds: 90-1000 rpm9 crank feeds: 1.4-22.4 p. minute9 table feeds lengthwise: 10.9-163 mm / minTable drive: 0.37 kWSpindle drive: approx. 2.5 kWSpindle deflection: 410 mmCutter diameter: max. 50 mmCutter head diameter: max. 110 mmSpindle drive approx: 2.5 kWOutside dimensions approx: 1.5 x 1.45 x 1.95 mmWeight approx: 2,2 tWith:- Deep milling device- Crank drive of the milling carriage- autom. longitudinal feedused, despite year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover  ...

Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

OptiCut The Marel Opticut volumetric portioning machine is designed to cut boneless meat into fixed weight portions with uniform shape. The product is placed into a mould where it is formed before being accurately portioned. Capable of delivering shingled products The OptiCut can deliver either single portions for direct packing or e.g. for a marinating process – or portions can be shingled into fixed weight batches for manual or automatic tray packing

The FAM TS-1D is a transversal cutter for fluid and uniform cutting of vegetables such as carrots, leeks, salads ... • Product diameter: 90 mm for hard products and 110 mm for flexible products • The slightly angled knives of the cutting wheel guarantee a perfect cutting result. • Cut shapes: flat cut, crinkle cut, julienne slices, halved slices • Optional frequency inverter adjusts the speed of the belts and the cutting wheel. · The cutting wheel can be replaced by a "spear" type head to cut longitudinal segments. · Cutting sizes: various cut sizes possible from 1,6 mm up to 40 mm • Articulated dump hopper and easy-to-disassemble covers give access to the product and transmission areas. · Infeed belt ± 1.400 mm

The FAM Flexifam is a medium-sized high-capacity dicer designed for slicing, strip cutting and dicing . FAM Flexifam is suitable for – meat such as beef, ham and turkey – cheese such as Beaufort, Cheddar, Edam and Emmentaler – nuts such as Hazelnut FAM Flexifam is specialized in smaller cutting sizes. First, the product is cut into slices to the thickness set manually by using the adjustment gauge, after which the second cut is made by the fast rotating circular knives cutting it into strips. The strips are then fed directly into the crosscut knife spindle producing the third and final cut-producing dices or rectangular pieces. Number of knives: 17 Distance between knives: 10 mm

Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with counter, Dosing device with weighing syste ...

Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 60 -Capaciteit 60 ton -Hydraulic -5 stations -Centraal smeersysteem -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Karl Schnell KS FD 175 Type 112 Emulsifier, 37 kW, 175 mm, hopper capacity 140 liters, output 2500 kg/h, 2955 rpm. You are very welcome to test the machine in our facility in Koblenz, Germany.

Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Contact: 01722894884 infoweyrauch-maschinen.com Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing syst ...

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

CUTTER Krämer + Grebe type 176 - 100 l with ejector the capacity of the Bowl 100 l 2 gear blade shaft 1440 and 2880 rpm. 2 gears bowl (they switch on automatically with the blade shaft) cast iron bowl Weight: 1200 kg Dimensions: length with ejector 2360 x width 1035 x height with ejector 1740 mm Power supply: 400 V / 50 Hz Power: 25/32 kW Protection: 62 A Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 60 -Capaciteit 60 ton -Hydraulic -5 stations -Achteraanslag electric -Centraal smeersysteem -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.

Producent: Treif Type: Argon built 2009 FRAME KNIFE D = 32 mm  The cube and strip cutter TWISTER basic is ideal for those who are looking for a profitable solution for perfect cutting quality in the medium performance class. The machine achieves an output of up to 2,000 kg in one hour, even with continuous use. Since the cutting chamber is generously dimensioned with 550 x 120 x 120 mm (L x W x H), a high filling quantity is always ensured. Product temperature in the range from 0 to - 4 C (depending on the product). Specifications:  maximum number of cuts / minute: 300  mechanical capacity: up to 2000 kg / h - with a net (for a 40x40 mm cube)  Length of loading chamber: 550 mm  Load compartment cross-section: 96 x 96 mm  Cutting thickness: 1 - 50 mm  Machine dimensions: (L x W x H) 1740 x 1480 x 1200 mm  manual loading method  Weight: 415 kg  ...

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

Catalog No. 6776 TECHNICAL DATA - spindle diameter 30mm - spindle working height 140mm - replaceable spindle - locking spindle - adjustable up/down - original guide - 4 types of rotation speeds + right / left 3000, 4500, 6000, 7000 rpm - table top dimensions with extension 2540x710mm - support - electric brake - 5.5 kW motor - diameter of the exhaust connection 2x120mm - dimensions length/width/height 2600x1200x1300mm - weight 693 kg ADVANTAGES – Belgian production - original DTR + CE documentation - table top extension - support - brake – unpainted – used milling machine, very good condition Net price: PLN 18900 Net price: EUR 4065 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

2 Side-lifts left + right

STANDARD-EQUIPPED

2 Lifts Left and Right.

STANDARD-EQUIPPED

STANDARD-EQUIPPED

STANDARD-EQUIPPED

Rotation cutter Built in 2006; working condition

STANDARD-EQUIPPED

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Technical data in image

Technical data: Motor power: 0,75 kW Voltage: 220 V / 50 Hz Machine width: 900 mm Machine height: 1150 mm Machine length: 750 mm Weight: 135 kg Year of construction: 1996; ready for use

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 45 -Capaciteit 45 ton -Hydraulic -5 stations -Achteraanslag electric -Centraal smeersysteem -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

4X RESERVE KNIVES SET FOR THREE-CUTTER M.MARTINI E6

-Operating hours 16499 h -Operating pressure 10 bar -Quantity 0,95 m³/min -Drive 400 V / 7.5 kW -Space requirement approx. B H 1200 x 1000 X 650 mm -Weight approx. 250 kg -Compressed air dryer brand: ULTRATROC type: SD 0060-304 Machine number: 11869-47 year: 1998 -Max operating pressure 16 bar -Safety refrigerants R 134 A -Drive 220 V / 0.17 kW -Space requirement approx. B 600 x H 75 0 x D 300 mm -Weight 20 kg -Compressed air tank standing Make: VIG built: 1998 - operating pressure 11 bar -Content 1000 l -Space requirement approx. B 800 x H 2300 mm -Weight approx. 120 kg -Ã?WAMAT

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 40 -Capaciteit 40 ton -Hydraulic -4 stations -Centraal smeersysteem -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Catalogue number 4339 - replaceable spindle - spindle adjustable up/down hydraulically and pneumatically - milling apparatus adjustable at an angle - vertical spindle stroke 10cm - max distance from the table top to the spindle 18cm - table top dimensions 90x76cm - dimensions of the table top with extension and extension 159x117cm - cast iron worktop - top adjustable up / down - 4kW motor - 2 types of spindle speed 10000, 20000 rpm - with feed - smooth regulation of feed speed - diameter of the extraction connection 8cm Dimensions: - length 159cm - width 198cm - height 170cm - weight 975kg - used milling machine - very good condition - unpainted Net price: 5500 PLN Net price: 1183 EUR Net price calculated according to the exchange rate of 4,65 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Nr katalogowy 4340 - wrzeciono wymienne - wrzeciono regulowane góra/dół hydraulicznie i pneumatycznie - aparat frezujący regulowany pod kątem - skok pionowy wrzeciona 10cm - max odległość od blatu do wrzeciona 18cm - wymiary blatu 90x76cm - wymiary blatu z przedłużeniem i poszerzeniem 159x117cm - blat żeliwny - blat regulowany góra/dół - silnik 4kW - 2 rodzaje prędkości obrotów wrzeciona 10000, 20000 obr/min - z posuwem - płynna regulacja prędkości posuwu - średnica króćca odciągu 8cm Wymiary: - długość 159cm - szerokość 198cm - wysokość 170cm - waga 925kg - frezarka używana - stan bardzo dobry - niemalowana Cena netto: 5500 PLN Cena netto: 1183 EUR Cena netto obliczona według kursu 4,65 PLN/EUR (przy większych wahaniach kursu cena może ulec zmianie)

Producer W&H Type GF 1005 Web width 800 mm. Cut-off length 650 mm. Material 18 – 200 gsm. Speed 220 cut/min. It has 4 unwind shafts, two of them can take reels of 1000 mm. dia. The machine has been making wrapping sheets for the food industry.

Standard

Cordon bleu cutter -Manufacturer: DIL -Condition: used -Width: 400 mm -Transfer belt from the upper half of the meat

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: EBA Cutting Machine 551 LT with side tables and light barriers Electro-mechanical knife drive Air table Chpjpskqes Hydraulic drive for press beams Infinitely variable pressing pressure (min. 200 daN, max. 1100 daN) with display via pressure gauge Foot pedal for pre-pressing or as a cutting indicator Press beam cover Electrically operated backgauge with professional program control electronic handwheel with infinitely variable speed for manual backgauge fine adjustment Optical cutting indicator with bright light-emitting diodes (LEDs) Press beam guided on both sides for uniform pressing pressure Djqedv Precision backgauge spindle adjustable backgauge rake with narrow pitch (32 mm) and plast ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Schröter Type: wafer cutting machine wafersize: 360 x 450 mm product high: max 5-80mm Output: approx. 5 double cut´s electrical: 400 V, 3 Ph different: automatic cutting machine for rectangular wafer, with a longitudinal and a cross-cut, wafer holder, retainers and 2 pcs cutting frame, first cut strip width 32 mm / second cut strip width 30 mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°