mass used for sale

Embossing machine, ornamentation machine - for the production of picture strips and picture frames with decorations and ornaments Model: STP / P Year: 1999 The machine was developed to emboss ornaments and decorations on wood, e.g. picture frames, furniture accessories, plastic, veneered wood and MDF Specifications: 8 max. Material width and 3-1 / 4 max. Thickness cap., Min. 7/8 wide x 3/8 thickness and 29-1 / 2 min. Length; 4-3 / 4 max. Embossing wheel height-adjustable and inclinable from + 5 ° to -45 °, wheel diameter from 160 to 200 mm, 60 mm Ø arbor. Embossing feed and recovery tank with a 26 lbs cap. and solvent exhaust outlet, a horizontal and vertical (piped) screw conveyor leads the pulp to an exchangeable extrusion nozzle, automatic patented recovery of the excess embossing mass. - 3.5 kW total installed power. Rollers, tubes and stamping compound are not inc ...

Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.

IV Bag in line test system is used for automatic container closure integrity test. The IV bag test measurement method is based on mass extraction technology. At deeper vacuum liquid will boil off the surface and become gas vapor. The intelligent molecular flow sensor will measure the amount of gas extracted from the IV bag while the IV bag is placed inside the sealed vacuum chamber. the leak flow rate is then compared to the maximum allowed leakage which is the flow rate generated from a known defect size at similar test conditions and a pass fail decision is made.

x-travel: 1450 mm y-travel: 1100 mm z-travel: 1300 mm Control: Siemens 840D working spindle:: forward bearing diameter: 100 mm tool taper: SK 50 spindle turning speed range: 20-6000 U/min rapid travel x/y/z: 60 m/min feed range x/y/z, infinitely variable: 1 - 60000 mm/min weight of the machine ca.: 31 t Equipment / Accessories: - automatic pallet changer with 2 pallets - clamping surface 1000 x 800 mm - max. loading weight per pallet (centre): 2000 kg - max. rotation speed of the table: 60 rpm - tool tower magazine with 180 places - max. tool-Ø (with free secondary positions): 250 mm - max. tool-Ø (with occupied secondary positions): 110 mm - max. projection length: 450 mm - max. tool weight: 35 kg - max. tilting torque: 50 Nm - max. total mass of all tools per tower: 600 kg - CNC manual control unit - coolant device with paper belt filter - internal coolant supply 80 bar - ch ...

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Pressure casting machine Netzsch Year model 1989. Refurbished: new lines, membrane and mass compression hydraulic piston seals. Had 12 years with very little use. The machine is a former Fiskars Oyj, E4361575 Arabia Finland. The machine is in full working order.

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Welding turntable ESS type DT 50 Fabr. No. 86 / 1125 Year of manufacture 1986 Load max. 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm. Control voltage 24 volts , motor power 100 watts , mains connection 220 volts, 50 Hz. - Face plate in the position, infinitely swivelling by 180 - speed control via rotary potentiometer - clockwise, clockwise rotation, foot switch - 2-stroke and 4-stroke operation - sliding contact for the mass up to 200 Amp. - new control ESS PS3 from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition; used

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The extensive and comprehensive software solution with intuitive graphical user guidance guides users quickly and safely to precise measurement results., Accessories:, ZOLLER measuring device control »pilot 3.0« with 17” monitor,, Autofocus/venturion 800,, Rotary encoder (ROD=) for high-precision position determination,, Tool inspection (incident image processing with centered LED lighting),, High-precision spindle ACE” concentricity 0.002 mm,, Standard functions pilot 3,, Tool management standard,, FORED manual measuring programs,, 3 used attachment holders., Z-axis travel: 800 mm, Traverse X-axis: 200 mm, X axis travel: 200 mm, Workpiece diameter: Max. 1000 mm, workpiece length: Max. 800 mm, Workpiece length: Max. 400 mm, Max. snap gauge diameter: d = 200mm, Max. Sna ...

Machine Type: Vibratory Mass Finishing Machine Manufacturer: WALTHER TROWAL Model: CV 125 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Grinding area: container Ø, inside: 930 mm Drive type: el./mech. Propulsion: 1.9 kW Remark: 2-stage motor, Rubber coating is in good condition Weight: 500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

The new filling machine has 6 fillers. Flow measurement on Endress Hauser Dosi Mass flow meters. Automatic machine, used Mitsubishi control, Lifting and lowering of fillers on servo motor. Festo pneumatics system, The machine is additionally equipped with an automatic shutdown of the machine if the filler does not hit the packaging. Possibility of programming the lifting of the fillers. On request, we can offer installations and training. Lower range pouring machine i.e. 100-1000ml (max 1500ml) It can pour products. chemicals, cosmetics.

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic shutter, Automatic central lubrication, Automatic fire extinguishing device, Coolant system with pump & coolant unit., Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel path Y ...

Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories: Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs, Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A, Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic closure flap Automatic central lubrication Automatic fire extinguishing device Coolant system with pump & cooling unit, Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel pa ...

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

Forest-Line MajorMill 5-Axis CNC Gantry Mill Year: 1992/2008 Number of Axes: 5 Type of CNC Control: Fidia C20 CNC Control Retrofit in 2008 Table Size: 83.27" x 236" (2115x6000mm) X: 236” (6000mm) Y: 110.23” (2800mm) Z: 49.21” (1250mm) Max. Cutting Height: 62.99"(1600mm) Effective Width Between Columns: 94.5"(2400mm) Spindle Speeds, 3-Range: 10-3200 RPM Main Milling Head on Ram: Hard Steel Cartridge - 3 Speed Ranges - Equipped with an accessory holder plate with auto clamping: Indexing 2.5 degrees Spindle Taper: #50 ISO A-Axis Spindle Head Tilt: +/-95 Degrees B-Axis Spindle Head Swivel: 360 Degrees A-Station AAC: yes Automatic Head Changer: yes Automatic Attachment Changer (ACC):: Yes - 3 Heads Right Angle Head: 10 - 3200 RPM, 2.5 degree indexing DRC12 Head Attachment (double stepless rotation): 10 - 5000 RPM, (Double stepless rotation) Multiplying spindle exten ...

Unipak horizontal AC generator with two bearings, mounted on baseplate, for steam turbine Manufacturer – Alstom Electric Machines Limited Output – 4800 kVA Voltage and Frequency – 6300 V 50Hz Rated Power Factor – 0.8 lagging Number of Poles – 4 Insulation Class – F Total mass of generator – 18000 Kg Standard to wich the generator is designed and built – IEC34 Enclosure code – IP54 Sound Pressure Level – 85 dB (A) Coolant – Clean fresh water

Suitable for automatic grinding of right-cutting, 2-edged twist drills with cylindrical shaft or MK shaft. Accessories: Wet grinding device. Pulling device 5 chucks, 1 grinding wheel holder,, Grinding area: 2.5-20mm, Point angle: 60 - 180°, Tool holder conical: MK1 - MK6, Cylindrical: Chuck 5 - 25 mm, automatic feed: 0.008 - 0.04 mm per tool revolution, Max. Tool length: up to 550mm, Grinding wheel diameter: 203 x 10 x 32 mm, number of revolutions: 2800 rpm, Connected load: approx. 1.25 kW (400 V / 50 Hz), mass: approx. 94 kg, Dimensions W x D x H: 520 x 900 x 1250 mm, colour: green RAL 6011, Grinding wheel (standard): 230 x 50 x 123 mm, speed: 2700 rpm, weight: approx 490 kg

Description: Machine Specifications: Model: BIESSE ROVER B 4.50 Year of Manufacture: 2006 Operating System: BiesseWorks on Windows XP Number of Axes: 3 X-axis: 5220 mm Y-axis: 1750 mm Z-axis: 225 mm Spindles: 1 Main Motor Power: 12 kW Maximum RPM: 18000 Work Area: Effective Work Area: 6m x 1.3m Workpiece Depth: Adjustable (slightly larger than the nominal depth) Tooling: ISO30 Tool Holder Toolholder Included (Tools not included) Variety of toolholders, including saw aggregate for X, Y, or 45° cuts Tool Magazine: Capacity: 12 positions Table Configuration: 8 Tables 4 Vacuum Blocks per Table Additional Features: Serial Number: 71035 3-Axis Machining Year of Construction: 2006 Air Supply: 7 Bar Mass: 5700 kg Power Supply Voltage: 380 VAC Rated Current: 38 A Number of Power Supply Phases: 3 Power Consumption: 21.1 kW Frequency: 50 Hz Biess ...

Semi-automatic filler for all types of liquids | K-Net CDAs K-Net semi-automatic filler offers a versatile dosing solution for a wide range of products, whether fluid, viscous or pasty. This filling machine can also be equipped (as an option) with a screwing system adapted to various types of caps. Thanks to its dosing flexibility, the K-Net is compatible with a diverse range of sectors, including the food industry (for products such as honey, oil, mustard, fruit juices, etc.), the varnish and paint industry and the pharmaceutical industry.), the varnish and paint sector, the cosmetics industry (for products such as creams, ointments, body oils, mouthwashes, hydroalcoholic gels, etc.), and the chemical industry (for products such as detergents, solvents, household products, etc.). The K-Net can be configured with an electromagnetic or mass flowmeter, depending on the nature of the ...

Semi-automatic filler for all types of liquids | K-Net CDAs K-Net semi-automatic filler offers a versatile dosing solution for a wide range of products, whether fluid, viscous or pasty. This filling machine can also be equipped (as an option) with a screwing system adapted to various types of caps. Thanks to its dosing flexibility, the K-Net is compatible with a diverse range of sectors, including the food industry (for products such as honey, oil, mustard, fruit juices, etc.), the varnish and paint industry and the pharmaceutical industry.), the varnish and paint sector, the cosmetics industry (for products such as creams, ointments, body oils, mouthwashes, hydroalcoholic gels, etc.), and the chemical industry (for products such as detergents, solvents, household products, etc.). The K-Net can be configured with an electromagnetic or mass flowmeter, depending on the nature of the ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-4020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1850.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCV-6020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems  ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...

Description: Trailer complete with excavator Trailer 4 tires for transporting excavators, total mass 1130 kg, leaf spring suspension, 4 tires 165/70/13, quick coupling hook, never used, not registered for road use, JPC HT 12 excavator year 2022 KOOP engine electronic ignition, 360 degree turntable rotation, hydraulic attachment for hammer and accessories Approx. Onsite Dimension. (l x w x h): 3,300 x 1,600 x 2,700 mm, weight approx.: 1,200 kg

Description: Trailer complete with excavator Trailer 4 tires for transporting excavators, total mass 1130 kg, leaf spring suspension, 4 tires 165/70/13, quick coupling hook, never used, not registered for road use, JPC HT 12 excavator year 2022 KOOP engine electronic ignition, 360 degree turntable rotation, hydraulic attachment for hammer and accessories Approx. Onsite Dimension. (l x w x h): 3,300 x 1,600 x 2,700 mm, weight approx.: 1,200 kg

Description: Trailer complete with generator, Trailer 4 tires for transporting generators, total mass 1030 kg, leaf spring suspension, 4 tires 165/70/13, quick coupling hook, never used, not registered for road use, PRAMAST VG-R30 electric generator, super silenced, automatic electronic ignition, water-cooled 4-cylinder Ricardo engine, engine with consumption reduction system. 220/380 Volt outputs, power 30 kW-41. 3kVA never used, 0 hours The indicated power refers to peak power. Approx. Onsite Dimension. (l x w x h): 3,300 x 1,450 x 1,700 mm, weight approx.: 1,100 kg

Description: Trailer complete with generator, Trailer 4 tires for transporting generators, total mass 1030 kg, leaf spring suspension, 4 tires 165/70/13, quick coupling hook, never used, not registered for road use, PRAMAST VG-R30 electric generator, super silenced, automatic electronic ignition, water-cooled 4-cylinder Ricardo engine, engine with consumption reduction system. 220/380 Volt outputs, power 30 kW-41. 3kVA never used, 0 hours The indicated power refers to peak power. Approx. Onsite Dimension. (l x w x h): 3,300 x 1,450 x 1,700 mm, weight approx.: 1,100 kg

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

ProJet 2500 Plus in very good condition, last maintenance 03/2024. Accessories: 3DS-MJP-ECS 93902324 consisting of MJP EasyClean System 230V and post-processing system, originally packaged particle filter 93902710, Installation: 2020, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, part geometry and size, part orientation and type of post-processing., Building material build material: VisiJet® Armor M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL    – Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet® M2R-WT   – Rigid whiteVisiJet® ...

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed building material under 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400,  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader,, Quinto Software Version 4.3 b 10 for milling cutters, drills, step drills, profile tools, groove simulation, Kennametal Hertel,, hydraulic workpiece clamping,, automatic Renishaw measuring probe,, automatic fire extinguishing system,, automatic central lubrication,, Glass scales on the linear axes, 1 clamping claw, 1 automatic chuck, 1 collet D:32mm, 2 loader pallets,, 2 grinding wheel holders., X-axis longitudinal movement: 380mm, Y-axis transverse movement: 280 mm, Z-axis vertical movement: 280 mm, C-axis swivel range: 340°, A-axis rotation range: 360 °, Center height: 210 mm, Workpiece holder: ISO 50, Grinding wheel diameter: Max. 200 mm, Drive power grinding lockers: 7,5 kW, Grinding spindle speed: stepless 0 - 9000 rpm, Connected load: 29 kW (400 V / 50 Hz), Dimensions W x ...

Description: few hours of operation  , measuring range:  ,X axis 500 mm  ,Y axis 400 mm  ,Z axis 400 mm ,  , resolution: 0.0005 mm accuracy (20 °c) ISO 10360-2 , temperature compensation function: Standard , length standard: Linear encoder guide method: Air bearing on each axis , clamping on each axis: One-touch air clamp fine feed of each axis: continuous fine feed over the entire measuring range on each axis table dimension:  ,764 x 875 mm , material: Granite ,  , workpiece: , maximum height: 595 mm maximum mass: 180 kg  , Z-axis balancing method: Counterweight (adjustable by 1.5 kg) , air supply , pressure: 0.35MPa (air source: 0.5-0.9MPa) , consumption (under normal conditions): 50 l/min (air source: 100 l/min) ,  , please also have look at pdf file of this machine z-mot ...

Well-maintained Mark Two 3D printer in good condition for sale. Running time: 4015 hours or 556 prints., Equipment:, - some remaining materials can be purchased additionally (expiration date expires), - 1 piece dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diam ...

Description: serial number 0265501 measuring range X x Y x Z : 200 x 200 x 200 mm resolution: 0.1µm accuracy: X, Y : (1.5+3L/1000) Z (image): (3+4L/1000) repeatability Z: S=0.4 µm drive speed: 300mm/s table glass size: 329x271 mm max work mass: 15 kg technical attributes setting measure approx (l x w x h) 700 x 800 x 1000 mm z-motion: 200 mm, x-motion: 200 mm, y-motion: 200 mm, table surface area l x w : 329x271 mm, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,000 mm

Description: KAESER TB 19 Cycling Refrigerated Air Dryer flow rate (m3/min): 2,10 pressure loss, refrigeration dryer (bar): 0,19 elect. power consumption at 100% flow rate (kW): 0,43 elect. power consumption at 50% flow rate (kW): 0,24 compressed air connection (G): 1 condensate drain connection (G): 1⁄4 electrical supply : 230 V/1 Ph/50 Hz Other features : Floating contacts: refrigerant compressor running, high pressure dew point The Kaeser cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to op ...