martini eb used for sale

1x hydraulic earth drill 945 € 1x auger 225mm 160€ 1x auger 300mm 190€ 1x auger 350mm 220€ 1x adapter, quick coupler MS-01 180€ 1x adapter, quick coupler MS-03 220€

Euromac Horizontal Panel Sawing Machine Logica Pinze 4500 model With Eberle Suction Cup Hoist Model E2v20/4 From 2011, Capacity 200kg.

Blow molding machine for sale, fully functional. Manufacturer Extraplast Machinen GmbH Year 2008 Engine power 80kW Heating power 49kW Max. hydraulic pressure 250bar Max air pressure 10bar Working pressure 330 bar Form clamping 450 x 850mm Price negotiable - make an offer

weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972

Wiesheu shared shop oven Type: EBO 128 Year of construction 2012 4 floors a 120x80cm with lower sheet metal shelf Stainless steel side plates with hood Electric fire Per floor 10,45kW on rolls NEW STONE SLABS FLOORS REPAINTED HOOD REPAINTED COMPLETELY CLEANED INSIDE Height: 212cm Width: 150cm Depth: 100cm

Ladentagegenofen WiesheuManufacturer : Wiesheu Year of construction : 2006Type : EBO 1-68R IS500per floor 1 x 60x80cm trayswith proofer on castors MobileEach floor 3N-PE AC 400/50Hz approx. 1.8kWEtage height 16cmExternal dimensions : W: 94cm D: 135cm H: 210cmDetails see picture

Ladentageofen Wiesheu EBOHducer : Wiesheu Year of construction : 2007Type : EBO 64 320 IS 600 InfraredEach floor 1 x 60x40cm sheetswith proofer on castors MobileEach floor 3N-PE AC 400/50Hz approx. 4,4kWThe stood for a long time in the garage. We plugged in, the fuse goes out. Has to be completely shaken throughDetails see picture         

Was used for the production and cooling of spreadable grease, with documentation, without accessories or spare parts, was maintained regularly, on-site inspection is possible.

Ladentagegenofen Wiesheu EBOHcreator : Wiesheu Year of construction : 2009Type : EBO 68 320 IS 600 Nostalgieje etage 1 x 60x40cm sheetswith proofer on castors MobileEach floor 3N-PE AC 400/50Hz approx. 5.15kWDimensions: Width : 94cmDepth : 140cmHeight 217cmDetails see picture

Max. plate format: 830x1070mm, max. number of plates: 4, max. operating temperature: 300°C, connected load: 6.5kW, without documentation.

Wiesheu Baking Suit Type: EBO 68-320 IS 600 consisting of a convection oven and 2 floor ovens: with exhaust air hood both ovens with digital scroll control ( IS control ) Convection oven is 60×40 cm for 5 sheets 400 volts Power 16kW IP protection class IP X4 Floor ovens are type EBO 68-320 IS 600 2 floors each 60×80 cm with swathing Year of construction 2008-2011 400V / 50 HZ / Stoves stand on a base frame on castors with locks We have about 10 pieces of these backcombis in stock

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

- SP EBV Suction Blower - HP Part Number CT397-02900 - for HP Indigo Series 3 Machines

Cantilever rack NEW Data: - H : approx. 400 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 400 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Cantilever rack NEW Data: - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 300 cm made of IPE160. - 12 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insi ...

I sell a new edge banding machine Cormak EBM300, year of construction 2022: LCD touchscreen display for setting the machine parameters and aggregates ON/OFF connection. Top feed belt 6 m/min. Element height 10 - 50 mm Edge thickness 0.4 - 3 mm  edge banding,  Sawing the final cut Radius R2 Milling Polishing brushes Total weight 400kg Length 2,30m (including edge plate 2,60m)! Feed zone only 1.30m long, convenient for the smallest workshop, or as an additional machine for edge banding the small work stucco quantities. New machine including warranty ratios, possible to try ! Full documentation and CE included. Available the same.

Cantilever rack NEW Data: - H : approx. 350 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 350 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Croissant Wrapper Brezellangroller Universum LWT 3/80-50J-Premium-EB2 / 40 Long

Wiesheu Backstation Backcombi EBO Dibas Wiesheu Backcombi with Dibas 64 S + EBO 86-L+S shared ovens and convection oven from year of construction 2018. -Dibas oven for 6 sheets 60x40cm -9.6 kW power -400 volts -Year of construction 07/ 2018 -1 floor EBO 86-S oven -400 volts 6.35 kW -Year of construction 07/ 2018 -1x EBO 86-L oven 2 floors - 10.8 kW -Year of construction 07/2018 -Exhaust air hood 64_200_240V50/60H 200-240V 0.25kW -Year of construction 07 / 2018 -Outside dimensions: Width: 64cm Depth 62cm Height 122cm

Make : EGLI Model : EBH1500EP Usage : Butter Homogeniser / Silo Capacity : 1500kg.hr Y.O.M : 2011 Condition : Very Good

Wiesheu shared shop oven Type: EBO 128-M (X1660-N-CBCCA) Year of construction 2015 digital control 2 floors a 120x80cm with base Black Front with hood Electric fire Per floor 10kW with water filter on rolls Height: 265cm Width: 153cm Depth: 130cm

Motor cable reel Manufacturer : Wampfler Type : EB040625-W100.3/40/10-90-HMK8/KN90L4 Free sag, drum on the mobile device Speed 30m/min. m. 50 mtr. Cable 4x16 mm² Condition : New, may have slight scratches/marks, comes from stock. Scope of delivery/information : see the pictures. Internal No.: Werkst. EG R2 P16 Werkst. EG R2 P18 Werkst. EG R1 P06

Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser

Floor oven electric oven Wiesheu Type: EBO 3-68 Bottom heat and top heat can be individually controlled 3 jaws each 1 x 600 x 800 mm Oven mobile with locking device Exhaust hood at the top with vapour capacitor GS 5-68 Proofing cabinet below Modular system with clipboard Connection 400V, 8.1 kW, 3 x 16A-CEE plug Water connection 3/4 inch, water drain for DN 40 Dimensions: 930 x 1350 x 2100 mm, WxDxH Used oven cleaned

used cooling table GGM Gastro EBBC3 GGM, very good condition, very little used, Ser.-Nr. 8102180586, year of construction 2021, 230 V, 50 Hz, 2.3 A, 593 W, Climate Class 4, in stainless steel version, weight approx. 180 kg, external dimensions: approx. 215 cm wide, approx. 55 cm deep, approx. 90 cm high

Inverter KEB 15.F5. EBE-350A 11KW tested used part

Case packer MONDO&SCAGLIONE | M.I. 4 EBC Year: 2000. Speed: 10.000 bph. Direction: Linear. Safety protections

Conveyor belt scale brand Kukla Belt scale for installation in a conveyor belt Belt width 500 mm (conversion to 650 or 800mm possible) Belt scale with roller chair Tachorad as speedometer Weighing frame with measuring cell 2 pcs test weights Evaluation electronics in the control cabinet Replacement electronics available at extra cost

Stoving oven Techno Grafica EBO 850; good condition; cleaned and tested; Working width 850mm; Spühlgumminung Techno Grafica SPG 850; good condition; cleaned and tested; Working width 850mm. Backing oven Techno Grafica EBO 850; good condition; working width 850mm; cleaning unit Techno Grafica SPG 850; good condition; cleaned and checked; Working width 850mm.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 121200 € : 5700 mm : 1100 mm : 1550 mm : 2700 kg : 25 cm³ : 76,1 x 6,8 mm : 2”1/2 mm : 76,2 x 3,8 mm : 63,5 x 63,5 x 5,6 mm : 70 x 50 x 8 mm : 70 x 50 x 6 mm : 79 mm : 250 mm : 20 mm : 195 ° : 5/7 U/min : 27 kW : 200 l FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction- Tube: . mm Oil- drain- Tube: . mm dimensions: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mm band length: 850 mm stroke: 450 mm total power requirement: 6 kW weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 100 mm capacity 45 degrees: round: 65,0 mm capacity 90 degrees: flat: 100 x 150 mm capacity 45 degrees: flat: 60 x 100 mm dimensions of saw-band: 1470 x 13,0 x 0,65 mm volt: 230 V : 45,0 m/min weight: 26,0 kg range L-W-H: 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deck oven, Fabr. Wiesheu, EBO124-320 / S600, electr., 2.0 sqm,

Screw Diameter: 62 mm //

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, adjusting cylinder -Power: 0.2 kW -Adjusting force: 500 N -Stroke: 100 mm -Price: per piece -Number: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 545/185/H150 mm -Connection: 24 V DC 1x36W -Number: 14x lights available -Price: per piece -Weight: 8 kg/piece

Machine light EBLFE 136 Housing galvanized sheet steel, glass cover, Fresnel cover -Connected value: 24 volts -without switch -Number: 2 pieces of lights available -Price: per piece -Weight: 5 kg

Hacksaw, hacksaw machine, hacksaw machine -Manufacturer: Kasto, Hydr. hacksaw machine -Max. Cutting height: approx. 310 mm -Max. Cutting width: approx. 340 mm -Saw blade: length approx. 615 mm -Roller conveyor length: 1500 mm -Dimensions machine: 2300/1800/H1300 mm -Weight: 1500kg

Cutting range round: 320 mm Cutting area square: 300 x 320 mm Saw blade dimensions: 575 x 50 x 2.5 mm Lifting speeds: 16 - 45 m/min Drive motor: 380 V, approx. 6 kW Space requirements: 1600 x 1580 x 1470 mm Weight: 1220 kg

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Deck oven Electric oven Wiesheu with IS 500 control Type: EBO 2-68 - Bottom heat and top heat can be controlled individually - 2 baking shelves each 1 x 600 x 800 mm - Mobile oven with brake - Extractor hood / condenser at the top of the storage compartment in the middle - Proofer at the bottom - Modular construction system - Connection 400V, 8.1 kW, 2 x 16A-CEE plugs - Water connection 3/4 inch, water drain for DN 40 - Dimensions: 930 x 1350 x 1900 mm, WxDxH Used oven More bakery machines in stock!

Manufacturer: Biesse Selco, Type: EBT 120, Year: 2008, Bench top saw: 4400x2200, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Saw blade protrusion: 122, Vorschub Sägewagen : 1-150, Min-max feed programming slider m/min: 100, Saw Blade Diameter mm: 430, Main motor kW: 15, Feeding speed continous adjustable: yes, Scoring Aggregate : 2,2 kW, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Feeding speed continous adjustable: yes, Year :2008

Wrapping/Film Packaging Machine CMB Type EBC 150/70 ERL 150 Specifications: •Fully automatic • Package height max. (mm): 650 • Package height min. (mm) :15 • Package width max. (mm).: 1250 • Package length min. (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge conveyor (mm): approx. 2,000 x 1,300 x 900 • Outlet table • Total dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5