marking used for sale

0: 15.000 kg height: 790-1350 mm width: 1200 mm weight: ~ 65,0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17" monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces

Boring power: 50,0 mm bore capacity in cast iron: 60,0 mm bore stroke: 230 mm thread dia.: bis M 36 M table surface area: 550 x 550 mm throat: 400 mm turning speeds: 54 - 1032 U/min morse taper: MK 4 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width: 30 mm column diameter: 200 mm engine output: 4,0 kW weight: 720 kg range L-W-H: 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

Boring power: 60,0 mm bore capacity in cast iron: 70,0 mm bore stroke: 260 mm table surface area: 600 x 600 mm thread dia.: bis M 42 M throat: 420 mm turning speeds: 64 - 1210 U/min morse taper: MK 5 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter: 220 mm T - slots - width: 30 mm engine output: 5,5 kW weight: 820 kg range L-W-H: 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Bottle marking

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, overhauled Specification: rubber extruder - used - screw diameter: 60 mm - screw length: 11D - screw length: approx. 660 mm - overhaul of screw and barrel - Overhaul of feed roller and safety cage - New rotary union for water - AC motor: 18.5 kW - New control cabinet with frequency converter for variable speed - New cabling - Pressure and temperature sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Overhauled according to CE-Standard safety regulations Warranty: 1 year Option: 3x temperature control units up to 95°C water temperature Power: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamber volume: 80 liter useable volume: -- liter friction: -- motor drive power: 390 kW Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year The data for this ad was created with ModulMWS - the software solution  ...

Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FBMachine -No: 4337, built in 1998milling unit:- Hydropneumatic, retracting with additional pneumatic slidexa0xa0 (110 mm quick-stroke, 50 mm working stroke)Druckluftfrässpindel:- 950 mm rpm- right or left rotationBrush unit:- Retracting hydropneumatically- stroke 0 - 100 mm- 1.1 kW- 2800 rpm- Collet diameter 12 mmClamping unit:- Pneumatic three-jaw chuck SCHUNK diameter 160 mm- Possible use for bevel gear pinion shafts with number of teeth 7 - 11xa0xa0 for top or foot machining in full-stroke modeAir consumption: 600 l / minCurrent type: 400 V / 50 HzTotal power requirement: 5 kWSpace required: 3900 x 2900 x 2600 mmDimensions (LxWxH) approx: 2600 x 1800 x 2400 mmWeight approx: 1880 kgWith- CE marking- Fully automatic brush adjustment- full protection cabinused, in good conditionPrice on request.Delivery: ex wareh ...

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 230 mm bore capacity in cast iron: 60 mm threading:: M 36 spindle taper: MT: 4 number of spindles: 9 spindle turning speed range: 54 - 1032 U/min feed steps: 6 spindle feeds:: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U table-size: 550 x 550 mm column diameter: 200 mm weight of the machine ca.: 720 kg dimensions of the machine ca.: 1,2 x 0,6 x 2,6 m STANDARD EQUIPMENT: - Feed with autom. electromech. clutch - Scale with adjustable drilling depth - Digital speed display - threading device - automatic tool ejector - thermomagnetic main switch - Push button for EMERGENCY STOP - Switch for clockwise / anti-clockwise rotation - Switches for high and low engine speeds - fixed table (MF) - Integrated coolant device - machine light - Height-adjustable chip protection disk with microswitch - CE marking OPTION: swiveling table size 480 x 480 m ...

working length: 150 mm working width: 100 mm height adjustment: 270 mm weight of the machine ca.: 0.180 t Marking machine With automatic dividing head With vice More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ultrasonic welding machine make HERRMANN type PS-DCMachine -No: SM5718/01 built in 2001Technical specifications:Power: 1000WProjection: 150 mmInstallation height: 450 mmStroke:50mmTable size: 280 x 300 mmPower connection: 220 VConnection value: 1.5 kWExternal dimensions approx.: 300 x 500 x 1200 mmExternal dimensions complete approx.: 1000 x 400 x 2000 mmwith- CE marking- Welding fixture Hahn Sontra type HSKLL / DAG A 207 Machine -No: 1296.01.01 year of manufacture 2008- height adjustable- Dialog touch screen controlsused very little, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...

Profile bending machine make ZOPF type ZB 70 / 2MMachine -No: 00475 built in 2000Technical specifications:Bending performance flat material: 60 x 10 mmor upright: 100 x 15 mmSquare material: 35 x 35 mmL profile: 50 x 50 x 6 mmT-profile: 60 x 60 x 6 mmShaft Diameter: 40mmRoller diameter: 152 / 162 mmShaft revolutions: 8.5 rpm.Drive power: 1.1 kWApprox. weight: 395 kgDimensions approx.: 900 x 600 x 1100 mmwith- CE marking- 7 sets of tools- 2 powered rollers- manual infeed of the upper rollerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

Surface treatment of plastic films by flame treatment to increase surface tension Field of application: Plastic films Machine unit existing main components • PSA Reversible Unwinding & Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice Comm. 2011-001.1 • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system Marking of defects • GWK temperature control units for roller cooling

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

table width: 6000 mm table length: 27000 mm burner heads: 5 cutting width: 4000 mm control: Vison T5 Vers. 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Gantry Flame Cutting Machine Incl. extraction Cutting range 24 x 4 m Total table size 27 x 6 m Marking unit 4 oxyacetylene burners (mixed gas) and a 3-phase unit (acetylene). The respective conversion kits to the standard version are still available. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry
 COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW

Other Info: Laser Marking MAKE   TRUMPF TYPE     VECTORMARK    YEAR    2002 DIMENSIONS Length   1500 mm Width    1000 mm Height    2000 mm Max. length           : 1064 mm Max. watt              : 15 W Focus          &nbs p;         : 163 mm Laser height         : 0 – 300 Max. area              : 120 x 120

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

ES1008AC TECHNICAL CHARACTERISTICS Payload: 230 kg Load capacity when extended: 113 kg Working height: 10 m Platform height: 8 m Total length: 2.48 m Total width: 0.83 m Total height (railing unfolded): 2.36 m Transport height (railing folded): 2 m Platform length: 2.27 m Platform width: 0.81 m Platform extension: 0.90 m Ground clearance (stowed away): 10 cm Ground clearance (increased): 1.90 cm Wheelbase: 1.87 m Transmission: Electric drive Turning radius (outside): 2.10 m Travel drive: 2x24VAC/0.87 kW Lifting drive: 24 VAC/3.5 kW Battery: 4x6 V/170 Ah Integrated charger: 24V/30A Gradeability: 25% Maximum permissible inclination: 1.5°/3° Non-marking tyres: 381x12 Weight (CE): 2.230 kg

ES0807AC Payload: 230 kg Load capacity when extended: 113 kg Working height: 7.80 m Platform height: 5.80 m Total length: 1.86 m Total width: 0.76 m Total height (railing unfolded): 2.15 m Transport height (railing folded): 1.83 m Platform length: 1.67 m Platform width: 0.74 m Platform extension: 0.90 m Ground clearance (stowed away): 9 cm Ground clearance (raised): 1.60 cm Wheelbase: 1.36 m Transmission: Electric drive Turning radius (outside): 1.64 m Travel drive: 2x24 VAC/0.5 kW Lifting drive: 24 VAC/3 kW Travel speed (retracted): 5 km/h Travel speed (extended): 0.80 km/h Battery: 4x6 V/170 Ah Integrated charger: 24V/30A Gradeability: 25% Maximum permissible inclination: 1.5°/3° Non-marking tires: 323x10 Weight (CE): 1.630 kg

ES0807AC Payload: 230 kg Load capacity when extended: 113 kg Working height: 7.80 m Platform height: 5.80 m Total length: 1.86 m Total width: 0.76 m Total height (railing unfolded): 2.15 m Transport height (railing folded): 1.83 m Platform length: 1.67 m Platform width: 0.74 m Platform extension: 0.90 m Ground clearance (stowed away): 9 cm Ground clearance (raised): 1.60 cm Wheelbase: 1.36 m Transmission: Electric drive Turning radius (outside): 1.64 m Travel drive: 2x24 VAC/0.5 kW Lifting drive: 24 VAC/3 kW Travel speed (retracted): 5 km/h Travel speed (extended): 0.80 km/h Battery: 4x6 V/170 Ah Integrated charger: 24V/30A Gradeability: 25% Maximum permissible inclination: 1.5°/3° Non-marking tires: 323x10 Weight (CE): 1.630 kg

ES1008AC Payload: 230 kg Load capacity when extended: 113 kg Working height: 10 m Platform height: 8 m Total length: 2.48 m Total width: 0.83 m Total height (railing unfolded): 2.36 m Transport height (railing folded): 2 m Platform length: 2.27 m Platform width: 0.81 m Platform extension: 0.90 m Ground clearance (stowed away): 10 cm Ground clearance (increased): 1.90 cm Wheelbase: 1.87 m Transmission: Electric drive Turning radius (outside): 2.10 m Travel drive: 2x24VAC/0.87 kW Lifting drive: 24 VAC/3.5 kW Battery: 4x6 V/170 Ah Integrated charger: 24V/30A Gradeability: 25% Maximum permissible inclination: 1.5°/3° Non-marking tyres: 381x12 Weight (CE): 2.230 kg

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0406 Payload: 200 kg Load capacity platform pull-out: 100 kg Platform dimensions: 1.34 x 0.76 m Platform extendable + 0.55 m Transport dimensions 1.34 m x 0.785 m Height: 2.07 m Railings folded down Height: 1.67 m Weight approx.: 790 Kg Working height: 6.5 m Platform height: 4.5m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 120 Ah integrated charger 24 V/ 15 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offers  ...

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0608LDN Payload: 230 kg Load capacity platform pull-out: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport dimensions 2.06 m x 0.99 m Height: 2,17m Railings folded down Height: 1.8 m Weight approx.: 1710 Kg Working height: 8.7 m Platform height: 6.7 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 300 Ah integrated charger 24 V/ 30 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with appropriate ramps with car trailer. Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquir ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0608 LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.28 m Handrails folded down Height:1.75 m Weight approx.: 2800 Kg Working height: 8 m Platform height: 6 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 10 / 12 / and 14m working height, with and without support. In addition, the machine is also available with bright non-marking chains. For further data please inquire. The machine can be viewed at our warehouse a ...

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offe ...

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse  ...

Off-road scissor lift - work platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport Dimensions: 2.27 m x 0.96 m Height: 2.14 m Railing folded down height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Supports can be folded in bright non-marking chains. Climbing ability up to: 30° Overload cut-off: Powered by battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and conditions on ...

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm