manual used for sale

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3650 x 27 x 0,9 mm weight of the machine ca.: 640 kg New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure  ...

sheet width: 1050 mm plate thickness: 8,0 mm distance between columns: 1250 mm angle adjustable from - to: 0 - 180 Grad upper clamping bar adjustment: 350 mm traversing speed: OW 4,4 mm/sek Control: ELGO TYP 86 back stop - adjustable: max. 1000 mm engine output: 5,5 kW weight of the machine ca.: 3200 kg range L-W-H: 1900 x 2600 x 1600 mm maintained condition with a lot of bending tools () Pointed rails, radius rails, bending rails, divided goats foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x gui ...

Carriage length: 2800 mm; Cutting width at width fence: 1000 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: Scorer: no; Height adjustment of saw blade: manual / hydraulic; Swivel adjustment saw blade: manual/hydraulic; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: RPMs: 4; Motor power: 5.5 kW; Engine brake: yes; Suction connection: 80 mm and 120 mm; Machine length: 3000 mm; Machine width: 1700 mm; Weight: 1000kg;

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 m The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was cre ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was created wi ...

CNC milling machine with manual tool change. Designed for milling and engraving workpieces made of solid wood, chipboard, MDF and materials with similar physical properties along the plane (2D milling), as well as artistic milling in 3-dimensional space (3D milling). Manufacturer Vanguard Working field 1300 x 2500 x 200 mm Electrospindle power 6 kW Inverter 7.5 kW Electrospindle speed 18000 rpm Feed speed 50 m/min. Milling speed 25 m/min. Clarity of drawing 0.025 mm Width of linear guides 25 mm (Y), 20 mm (X, Z) Operating voltage 380V 3 phase 50-60 Hz Equipment: DSP controller steel portal Vortex vacuum pump 7.5 kW Separate vacuum clamping system with 6 zones Tool length calibration sensor Drive ball screw pair manufactured by ATLANTA (Germany) Rack-and-pinion drive manufactured by WMH (Germany) Prismatic guides manufactured by HIWIN (Taiwan) Manual central lubricati ...

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

Used laboratory dissolver, column dissolver with geared motor and manual speed setting from Italian company Ferri Spa type F30/D. Description: - stepless speed adjustment - manual - manual column lifting with counterweight - current control box with control panel - suitable for small containers - height 1250 mm - width 600 mm - length 750 mm - weight approx. 80 kg - motor power 1 hp - number of engine revolutions 2800 - diameter of dispersing disc: 30/140 mm - voltage: 220/230V

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2 ...

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min / max to grinding: 1.5 / 75 mm, Regulating wheel width: 160 mm, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): Manual, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum infeed grinding length: 160 mm, Motor power grinding wheelhead: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, High: 1.440 mm, Weight: 3.000 Kg.

, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15.000 Kg, Accessories included:

Plongee Portfolio, Cymbal Ports, Speed ​​variator for the traction wheel OPTIONAL: Lead-in slide, CNC, Fairing, Automatic centralized greasing, 1 Year Warranty / Porta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection,, automatic lubrication system, 1 year warranty, Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 0/450 rpm, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TF, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1 ...

Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Control type ((cnc / manual): Manual, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 Kg, Accessories included: Automatic Hydraulic Plongee, Diamond Compensator, Plongee Porter, Saucer Cymbal, Speed ​​Variator for the traction wheel OPTIONAL: Lead-in Trimmer, Cowling, Automatic Centralized Lubrication, 1 Year Warranty / Automatic hydraulic Plongee, Diamond compensator, Porta plongee rules , Saucers wheel holder, OPTION: Porta rules enfilade, protectio ...

Plongee automatic hydraulics, Refrigeration equipment, Plongees knife, Cymbal grinder, OPTIONAL: Lead-in grinder, CNC, Fairing, Gearbox elimination and Adaptation of speed variator for drag wheel, Automatic centralized lubrication, 1 Year Warranty / Plongee automatic hydraulic, refrigeration equipmentPorta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): Manual, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding whee ...

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

dimensions of saw-blade: 250-300 x 40.0 mm cutting range: 95.0 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: flat: 125 x 90 mm capacity 45 degrees: round: 95.0 mm capacity 45 degrees: square: 85 x 85 mm capacity 45 degrees: flat: 95 x 85 mm capacity 60 degrees: round: 70.0 mm capacity 60 degrees: square: 60 x 60 mm capacity 60 degrees: flat: 75 x 60 mm work height max.: 900 mm saw blade turning speeds: 40 / 80 U/min voltage: 400 V total power requirement: 1.6 / 2.1 kW weight: 230 kg range L-W-H: 620 x 850 x 1600 mm including 2x heavy / robust roller conveyors () Furnishing : - vertically guided cold circular saw - manual quick-clamping device - manual, stepless saw blade feed - simple & comfortable miter adjustment Setting: 45-90-45-30° - generously sized gearboxes - 2x cutting speeds - Rotation compensation for long saw blade service life - Convenient saw blade chan ...

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

sheet width: 3050 mm plate thickness: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: 750 mm Control: SC7p engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm from a maintenance workshop well maintained condition - checked annually () Furnishing: - electro-hydraulic sheet metal shears - backdrop-guided - ATLANTIC NC control unit - model SC7p Target / actual information about the motorized back gauge Manual positioning possible via handwheel Digital display for backgauge position electro-hydraulic cutting angle adjustment Adjustable retraction from the back gauge before the start of the cut Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Fi ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...

Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...

sheet width: 2540 mm plate thickness: 3.25 mm throat: 100 mm no. of strokes: 60.0 Hub/min back stop - adjustable: 530 mm voltage: 400 V engine output: 7.5 kW weight: 2450 kg range L-W-H: 3600 x 1000 x 1560 mm Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 9685 € : 200.48 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 385 kg : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Coolant equipment Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS: Electronic speed variator with speed digial reader (VE+TAK) € 1.265,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) € 620,00 Manual tapping system (IR/RS) € 785,00 Manual tapping system for models with variator(IR/RS-VE) € 535,00 Dreh- und neigbar ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10440 € : 214.02 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 400 kg : 0,1 - 0,2 - 0,3 mm/U : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Coolant equipment Worklight Fixed table Safety drill guard with microswitch CE mark ALTERNATIVE: Version BX.35 with electromagnetic chuck € 12.265,00 OPTIONS: Electronic speed variator with speed digial reader (VE+TAK) € 1.265,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) € 620,00 Manual tapping system (IR/RS) € 78 ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10610 € : 217.51 € : 40 mm : MK 4 : 350 mm : 132-194-277-319-466-666-8 U/min : 2.2 kW : M33 : 755 mm : 480 mm : 2280 mm : 150 mm : 80 - 880 mm : 1225 mm : 480 x 480 mm : 175 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark OPTIONS: Electronic speed variato with speed digital reader(VE+TAK) € 1.265,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) € 620,00 Manual tapping system (IR/RS) € 785 ...

We sell a TRAK DPM 800 CNC milling machine in very good condition. Machine having been little used. DPM type 3 axes operating in MANUAL and CNC Machine stroke X 800 mm Y 420 mm Z 610 mm Table height 970 mm Table dimensions 1270 mm x 320 mm Feed rate of the X, Y, Z axes 5 - 2540 mm / min Manual feed speed Z axis 0-450mm / min Head tilt + 90 ° / -90 ° Spindle diameter 100 mm Manual spindle stroke 120 mm Spindle cone ISO 40 DIN 2080 M16 Spindle speed 70-3800 rpm Spindle power 3.75KW Drilling capacity 36 mm Milling capacity 80 cm3 / min Tapping capacity M30 Maximum weight on the table 600 Kg Integrated watering tank with 1CV / 60 liter pump Automatic centralized lubrication PROTOTRAK command Type AGE3 DC motor on X, Y, Z axis Digital display X, Y, Z Dialogue programming system RS 232 / CAD-CAM link To be taken on site, unpackaged. Exworks delivery

Used end of line TMG up to 1200 box hour Case Erector with Hot Glue Sealing Firstly the TMG case erector features hot glue bottom sealing It includes notably a Nordson glue heater This allows for the formation and sealing of various carton sizes Additionally the machine has a painted iron frame It also comes with safety protections Importantly it is capable of producing about 1200 cartons per hour This equipment complies with CE standards as of 2018 and is provided with a manual Consequently this offers an efficient packaging solution Case Packer with Mechanical Movement Moreover the TMG case packer has a mechanical movement on axes It s designed for precision and adaptability It can have for example two bottle grab heads 6 6 or one with 12 heads This setup accommodates different bottle diameters Furthermore the entry bench is made from stainless steel indicating a robust machine With a  ...

Complete signmaking equipment Made in USA for fast producing channel letters! For EU customers we provide FREE SHIPPING to your door! The machines are in operating condition, ready to use. 1. Multifunction Automatic CNC Metal Channel Letter Bending Machine (Flange & Notch functions) CNC metal channel letter bender capable for fully automatic channel letter fabrication, whereby producing cuts, bottom notched flange and bending of channel letters returns. It is capable to make aluminium channel letters with trim cap. We can provide well written manual in English and training on our premises if asked. 2. Norlok Letterlok 4000 Automatic Clincher Machines for Aluminium Channel Letters Norlok Letterlok 4000 Clincher is particularly designed for fastening the letter returns and letter backs. It uses newest technique power to connect metals without drilling, spot welding and  ...

Used Bottle Sealing Wax Machine Year 2021 Versatility in Bottle Size Handling Firstly the 2021 used sealing wax machine caters to bottles ranging from 0 75 to 5 liters This flexibility allows it to adapt to various product types significantly enhancing operational versatility Advanced Customization Capabilities Moreover customization is a standout feature Manual timers enable fine tuning of wax immersion and cooling phases Additionally a manual thermostat allows for precise adjustment of the wax s temperature These features collectively ensure a superior seal for each bottle Efficiency in Energy Use of the Used Bottle Sealing Wax Machine year 2021 Furthermore the Bottle Sealing Wax Machine specification of 230V power requirement and 1 8 kW consumption underscores its energy efficiency Such specifications indicate not only a low operational cost but also an environmentally friendly approa ...

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 315mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 3300mm; Machine width: 2000mm; Weight: 650 kg; The Classic 3200 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels, a ...

Carriage length: 2500 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 3150mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 2660mm; Machine width: 2000mm; Weight: 650 kg; The Classic 2500 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels,  ...

sheet width: 2040 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm no. of strokes: 50 Hub/min cutting angle: 1.4 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 1.0 - 550 mm column arm: 100 mm Control: manuell engine output: 5.5 kW weight of the machine ca.: 2050 kg. range L-W-H: 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front -  ...

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 68840 € : 1383.68 € : 600 mm : 1500 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 3 : 20 - 100, 80 - 400, 400 - U/Min : max. 8 m/min : max. 8 m/min : 290 mm : 90 mm : 5 MK : 225 mm : 11 kW : 3,5 / 22 kW/Nm : 1,75 / 11 kW/Nm : 120 Nm : 1250 daN : 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenien ...

Stopped due to lack of use. Very little use, practically new, URGENT SELL! The Eurofold 235 Folder comes with a suction marker, two automatic or manual adjustment bags, a screen for machine adjustment, 40m³ air pump, support table and electric or manual output. ​Maximum format: 350 mm x 650 mm Minimum format: 90 mm x 120 mm. (optional 60mm x 80mm) Range of weights: 40 gm² to 240 gm². Depending on paper quality Speed: Up to 30,000 folds per hour, Din A4 Number of Bags: 2 Bag adjustment: Manual Minimum folding length: 20 mm

Article code: 14-10-067 Manufacturer: Athena Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1000x1000x1800mm Weight: approx. 700kg Control: conventional Grinding area: Grinding area: approx. 300x180mm Grinding height: approx. 220mm Magnetic clamping surface: approx. 250x150mm Grinding spindle: Grinding spindle dimensions: approx. Ø175x76x76mm Grinding spindle speed: approx. 2820 rpm Drive power: approx. 2.5kW Z-Delivery: Manual Grinding movement: manual Accessories  Segment grinding wheel with flange  Splash guard – enclosure  Grinding wheels – protection  Coolant device  Tension wrench  Permanent magnet  Instruction manual Other accessories on request Price and other technical data on request

saw blade diameter: 275 x 2.5 x 40 mm cutting diameter: 90.0 mm capacity 90 degrees: flat: 140 x 70 mm capacity 90 degrees: square: 80 x 80 mm capacity 45 degrees: round: 70.0 mm capacity 45 degrees: flat: 90 x 80 mm cutting speed: 40 / 80 U/min total power requirement: 1.2 / 1.4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition () Furnishing: - manual cold circular saw - Column-guided saw head - one-sided miter adjustment over mounted turntable Material support table with degrees - mobile machine base - Pole-changing motor (2x cutting speeds) - manual cutting/lifting version - manual material tensioning - 1x circular saw blade - 1x material stop Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9164093 The data for this ad was created with  ...

Description: Vertical panel saw Brand: Harwi Type: Orca 1850 Year of construction: 2008 Machine number: 5913 AY Max. Cutting height: 1,850 mm Max. Cutting length: 4,300 mm Max. Cutting depth: 60 mm Saw blade diameter: 250 mm Saw blades: 30 mm Motor: 3.0 kW, 400 V, 4.3 Amp Saw speed: 2,800 rpm Support: Standard blocks Cutting wall: Closed wall Strip overlay: Yes Back wall: Closed, sagging at horizontal cuts Measuring system: vertical and horizontal analog Turning saw head: manual Saw movement: manual Machine frame: independent A-frame Extraction: direct hood extraction Saw carriage attachment: manual Extraction connections: diameter 100 mm Approx. Onsite Dimension. (l x w x h): 5,300 x 1,400 x 2,700 mm, weight approx.: 600 kg

Description: Max. diameter of main saw blade: 400 mm Max. cutting height with saw blade at 90°: 125 mm Max. cutting height with saw blade at 45°: 88 mm Speeds of main saw: 3000/4000/5000 r/min LED display Saw carriage dimensions: 380 x 3200 mm Power of main saw motor: 7.5 HP (5.5 kW) Front-zipper blade diameter: 120 mm (Z12+12) Power motor front-zipper: 1 HP (0.75 kW) Speed of presaws: 8000 r/min Cutting width: 1300 mm Manual stop adjustment Mitre guide Manual adjustment of the side guide (saw width adjustment) Manual saw blade tilt adjustment, with digital readout 0-45° Motorised height adjustment for main saw Transport dimensions: 2000x1100x1100 mm and 3320x460x300 mm main motor: 5.5 kW, cutting width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 3,300 x 3,100 x 1,600 mm, weight approx.: 800 kg

Surface grinding machine SAIM E4 Hand-operated surface grinder for quick overgrinding/tuning, etc. Grinding path X-axis 220mm /manual Grinding path Y-axis 100mm/manual Grinding path Z-axis 150mm/manual Magnetic Plate / New 250x125mm Btrt79jxow Coolant system Dimensions: LxWxH 0.8x0.8x1.7 meters / Weight 500Kg

sheet width: 1520 mm plate thickness: 4.50 mm thickness at Niro-steel: 2.25 mm distance between columns: 1600 mm stroke of upper beam: 360 mm work height max.: 900 mm adjustment: UW 100 mm total power requirement: 8.25 kW weight: 3000 kg range L-W-H: 2480 x 975 x 2080 mm Furnishing: - robust motorized folding machine 2x drive motors with 4.0 KW each - swiveling control panel, front right - Angle adjustment via electric. Potentiometers including digital actual values 1x coarse adjustment / 1x fine adjustment Adjustment 0.1 degrees - Manual & automatic mode selectable - Coding switch for opening width of the upper beam - 1x bending tool set - manual adjustment of the lower beam - 1x freely movable double foot switch - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355099 Machine video: https://www.youtube.com/watch?v=hC_j3FqEE ...

Key data: 5300 mm, 2200 mm

max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg

Carriage length: 3800 mm; Cutting width at width stop: 600 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: Pre-scorer: yes; Height adjustment of saw blade: manual / hydraulic; Swivel adjustment saw blade: manual/hydraulic; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: RPMs: 4; Engine power: 7.5 kW; Engine brake: yes; Suction connection: 80 mm and 120 mm; Machine length: 3870 mm; Machine width: 1200 mm; Weight: 1000kg;

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : China : 1900 € : 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm : 45 / 90 m/min : 225 mm : 180 x 245 mm : rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm : 1.1 kW : 1500 mm : 700 mm : 1400 mm : 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carriage length: 5000 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 2800 mm; Cut depth: Scorer: no; Height adjustment saw blade: manual / hydraulic; Swivel adjustment saw blade: manual / hydraulic; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: Speeds: 4; Motor power: 7.5 kW; Engine brake: yes; Extraction connection: 80 mm and 120 mm; Machine length: 3870 mm; Machine width: 1800 mm; Weight: 1000kg;

Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...