maho 800 cnc used for sale

Quality unchecked. Provide: A-axis: -100° ~ +120° C-axis: 360° Positions on exchanger: 30

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head

The AVIA VMC 800 HS vertical machining center was built in 2004. The milling center is equipped with a Heidenhain 530 numerical control system. The price of the machine includes the HEIDENHAIN TS 632 A40 optical probe for workpiece measurement and the HEIDENHAIN TT130 plug for tool length measurement. The machine is equipped with a 24-piece tool magazine. 31 pieces of frames are sold with the machine.

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

We sell a TRAK DPM 800 CNC milling machine in very good condition. Machine having been little used. DPM type 3 axes operating in MANUAL and CNC Machine stroke X 800 mm Y 420 mm Z 610 mm Table height 970 mm Table dimensions 1270 mm x 320 mm Feed rate of the X, Y, Z axes 5 - 2540 mm / min Manual feed speed Z axis 0-450mm / min Head tilt + 90 ° / -90 ° Spindle diameter 100 mm Manual spindle stroke 120 mm Spindle cone ISO 40 DIN 2080 M16 Spindle speed 70-3800 rpm Spindle power 3.75KW Drilling capacity 36 mm Milling capacity 80 cm3 / min Tapping capacity M30 Maximum weight on the table 600 Kg Integrated watering tank with 1CV / 60 liter pump Automatic centralized lubrication PROTOTRAK command Type AGE3 DC motor on X, Y, Z axis Digital display X, Y, Z Dialogue programming system RS 232 / CAD-CAM link To be taken on site, unpackaged. Exworks delivery

Jarbe / Agursal X: 1500 - Y: 800 - Z: 500 mm Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes Weight: 7 ton

Sorulace FS 8000 CNC travelling column milling machine Control unit : Heidenhain 430 i X : 8.000 mm Y : 2.400 mm Z :1.600 mm Speed: 9,5÷230÷3.000 U/min Feeding : 5.000 mm/min Speed movement X axis: 15.000 mm/min Speed movement Y +Z axis: 15.000 mm/min Spindle Taper: ISO-SK 50 ATC and tool changer Turning table : 2000X2000 Many tools come with the machine

Control Siemens 840 Dsl CELOS Rotary diameter. [mm] 410 Turning length [mm] 800 General: Year of construction 2016 Control Siemens 840 Dsl - Celos Turning diameter 410 mm Circumferential diameter 700 mm Turning length 800 mm Workpiece length max. 850 mm Spindle: Motor spindle technology Speed 5,000 rpm Power max. 34 kW Torque max. 380 Nm Bar passage 65 mm C-axis 0.001° Chuck SMW Autoblock BBD 210/66 Tool carrier (X/Y/Z): Technology Disc turret on cross slide Tool drive 6,000 rpm, 10 kW, 36 Nm Tool holder VDI 40 Number of stations 12 X-axis 300 mm Y-axis 120 mm (+/- 60mm) Z-axis 855 mm Robot system: Technology Universal Robot Manufacturer: DMG MORI / Fanuc Type Robo2Go / Fanuc M-20iA Workpiece diameter max. 125 mm Workpiece weight max. 1x 10 kg / 2x 5kg Gripper I Double Gripper for Flange Parts (Short Parts) Gripper II Shaft grab for handling shaf ...

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

turning diameter:700/410 mm turning length:800 mm speeds spindle 1:5000 1/min speeds spindle 2:6000 1/min Main spindle capacity:32/25 kW hollow clamping cylinder:77 mm y-Axis min./max.:+/- 100 mm tool magazin::48 Pos tool taper:HSK 63 milling head speed:12.000 1/min milling spindle drive:22,5 / 19 kW total power requirement:74 kVA dimensions of the machine ca.:6,50 x 2,68 x 2,00 m sub spindle power:14,5 / 12,5 kW CNC - Turnmill with B-axis (torque-motor) and subspindle, 5-axis simultaneously machining, alternating speed, MPC 1.0, 3-D touchprobe BLUM TC62, Main spindle ISM 76, C axis and brake Subspindle ISM 52, C axis and brake Partly hollow clamping device for subspindle ( D = 52 ), Differential pressure device for main- and subspindle coolant device 8/20bar, 20/25 l/min, paperfilter, coolant through subspindle, Chip conveyer, Chuck flushing device (main- and subspindle), oilmist suctio ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

more tech. Details on request

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1250 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 7,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=6700, B=3350, H=1500 mm - Transportabmessungen L=2300, B=1200, H=910 mm                                                L=3600, B=505, H=280 mm -Gewicht 1000 kg Inklusive: - Sägewagen mit wartungsarmer Rundstangenführung - bedienfreundliche CNC Steuerung von 3-Achsen - motorische Höhenverstellung mit digitaler Anzeige im Monitor - motorische Schwenkverstellung mit digitaler Anzeige Monitor - motorische  ...

Year of construction: 1998 Control: NUM with cellar software -4-way steel holder machine Dre diameter over bed: 1000 mm Dre Ø over carriage: 620 mm intake: CL 11 motor spindle: 37 kW speed 1500 rpm. Spindle bore: 105 mm Reitstock-Ø 125 mm Weight: approx. 8500 kg

; very good condition, ready for operation

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Number of axis total: 7 Number of spindles: 2 Number of revolvers: 2 Spindle nose: DIN 55026 A4 Spindle hole: 32 mm Travels: X1: 180 mm X2: 195 mm Z1: 340 mm Z2: 440 mm Y1: +40/-40 mm Y2: +40/-25 mm Y axis: 70 (-30/+40) mm Turret slide: number: 2 Number of positions turret 1: 16 Number of positions turret 2: 12 Driven tools turret 1: 16 Driven tools turret 2: 12 Spindle speeds: 6000 rpm Power of driven tools: 6 kW Spindle nose: VDI: 25 DIN 69880 Main spindle: C axis Spindle speeds: stepless up to: 8000 rpm Back spindle mobile: max. speed: 8000 rpm Power of back spindle: 12 kW Spindle motor: 7 - 9 kW Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 25 kVA Total power required: 20 kW Machine ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 11069 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 560 mm Turret slide: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 100 - 3000 rpm Tool shank cross section: 20 mm Power of driven tools: 1.5 / 3.7 kW Max. drill capacity: 25 mm Indexing time: 0.4 sec Upper turret head: X axis: 175 mm Z axis: 305 mm Lower turret head: X axis: 132 mm Y axis: 340 mm Z axis: 155 mm Main spindle: Spindle nose: ASA 5" Spindle hole: 52 mm Inner taper type: DIN 6343 Max. bar diameter: 41 mm Max. turning diameter: 200 mm Maximum turning length: 300 mm C axis (spindle,resolution): 0.001 ° Spindle speed ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MONFORTS CONTROL SYSTEM MTC Technical data Centre height: 250 mm Distance between centres: 1500 mm Swing over cross-slide: 290 mm Swing over bed: 500 mm Taper in spindle: DIN 55027 Carriage: Transversal strocke (X axis): 265 mm Spindle speeds: number (steps): 3 from: 3 rpm up to: 2800 rpm Taper in tailstock: Morse taper: 5 MT Spindle stroke: 160 mm Spindle diameter: 80 mm Rapid traverse X: 5 m/min Rapid traverse Z: 10 m/min Spindle motor: 16.5 kW Voltage 50 Hz 3x: 400 Volt Total power required: 16 kVA Machine´s weight about: 3000 kg Various accessories: 3-jaw chuck diameter: ROTA-S 250 mm 4-jaw chuck diameter: 250 mm Set of jaws Set of jaws hard Travelling steady Lamp Tailstock Coolant system Interface serial port RS 232 Chip conveyor  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL PC Fusion 640M Operating hours: 77200 Technical data Number of axis total: 9 Number of spindles: 2 Spindle hole: 88 mm Turning diameter: 610 mm Turning length: 1105 mm Carriage: Longitudinal travel (X-axis): 1137 mm Transversal strocke (X axis): 580 mm Transversal travel (y-axis): 210 mm Tool magazine stationary, number of tools: 80 KM 63 C axis (spindle,resolution): 0 - 360 ° / 0.001 ° Spindle speeds: stepless from: 35 rpm up to: 3500 rpm Milling cutter speeds: 10000 rpm Rapid traverse X: 30 m/min Rapid traverse Z: 20 m/min Rapid traverse Y: 15 m/min Total power required: 26 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 5300 mm Width: 3000 mm Height: 2800 mm Various accessories: 3-jaw chuck diameter: 2 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Spindle hole: 43 mm Carriage 1: Longitudinal travel (Z-axis): 240 mm Transversal strocke (X axis): 150 mm Transversal travel (y-axis): 100 mm Carriage 2: Longitudinal travel (X-axis): 340 mm Cross travel (z-axis): 340 mm Y axis: 100 mm Turret slide: Number of positions: 16 Number of positions turret back side: 8 Driven tools turret 1: 16 Back spindle: Voltage 50 Hz 3x: 400 Volt Total power required: 17 kW Various accessories: High pression colant device Paper filter facility Oil mist extractor Bar feeder: LNS Interface serial port RS 232 Chip conveyor Toolholders Set of toolholders Driven tool holder radial (nbr.): 5 Driven tool holder axial (nbr.): 9 Tool holder fix (nbr.): 6 Tool holder (number): 6

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 21i-TB Operating hours: 3692 Technical data Taper in spindle: A2-5 Spindle hole: 51 mm Turning diameter: 300 mm Bar diameter with collet: 24 / 36 mm Carriage: Longitudinal travel (Z-axis): 370 mm Cross travel (x-axis): 210 mm Turret slide: number: 1 Driven tools turret 1: 12 Spindle speeds: 30 - 6000 rpm Power of driven tools: 2.2 / 3.7 kW C axis (spindle,resolution): 0.001 ° Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 10 m/min Machine´s weight about: 3000 kg Overall dimensions machine: Length: 2530 mm Width: 1400 mm Height: 1840 mm Various accessories: Lamp Coolant system Foot pedal

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 0 Technical data Centre height: 275 mm Distance between centres: 600 mm Swing over cross-slide: 150 mm Swing over bed: 600 mm Turning length: 610 mm Carriage: Longitudinal travel (Z-axis): 600 mm Transversal strocke (X axis): 460 mm Resolution: 0.001 mm Turret slide: number: 1 "DUPLOMATIC" Number of positions turret 1: 12 Fixed tools turret 1: 6 Driven tools turret 1: 6 Inner cone diameter: 20 x 20 mm Inner cone DIN: VDI 30 Taper in spindle: Camlock: A2-6 Inner taper type: B 32 / B 45 / F 48 Collet bore: 24 / 36 / 42 mm C axis Spindle speeds: stepless up to: 4000 rpm Inner taper type: F66 Internal spindle diameter: 60 mm Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal ...

SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC 516-1326, (2) 51x102 vacuum tables- 15M FANUC Controller, (2) vacuum pumps 7-1/2 hp. each- 1995 very low hours, ……….…………..Price-$15,000 reduced

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Technical data Centre height: 125 mm Swing over cross-slide: 115 mm Swing over bed: 200 mm Max. turning diameter: 270 mm Maximum turning length: 265 mm Carriage: Longitudinal travel (Z-axis): 400 mm Transversal strocke (X axis): 150 mm Turret carriage: Type: VDI-20 Number of positions turret 1: 8 Fixed tools turret 1: 4 Driven tools turret 1: 4 Taper in spindle:: D1-3" Camlock Inner taper type: B32 Spindle speeds: stepless from: 30 rpm up to: 5000 rpm Spindle power: 5.5 / 7.5 kW Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal from: 0 mm/min up to: 5000 mm/min Rapid traverse:: 7.5 m/min Spindle motor: 5.5 kW Air connect: 5 - 6 bar Voltage 50 Hz 3x: 380 Volt Total power required: 15 kVA Machine´s weig ...

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Key data: 1030 Fanuc, 1650 21 i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Key data: 670 Mazatrol, 1380 640 M

Turning diameter: 670 mm Turning length: 1380 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: 640 M Max. turning Ø:  670mm X-Axis:          740mm Y-Axis:          410mm Z-Axis:          1.380mm B Axis:          270° Speedrange:      4000Rpm Spindle power:   30kW Subspindle speeds:4000Rpm ATC / revolver:  40 Capto C6  Speed live tools:4000Rpm Length:          7.000 mm  Width:           3.000 mm  Height:          3.000 mm  Weight:          15.000 kg 

Key data: 550 Fanuc, 550 21 iTB, 12

Turning diameter: 550 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 iTB C – Axis 360.000 positions Chuck spindel 250 mm Chuck sub spil 160 mm Package with tool holder some driven Collet device with collets Max. turning Ø:  550mm X-Axis:          210mm Z-Axis:          550mm Spindle bore:    65mm Speedrange:      4000Rpm Spindle power:   15kW Subspindle speeds:4000Rpm Subspindle power:11kW ATC / revolver:  12 Speed live tools:4000Rpm Speed live tools:4000Rpm Power live tools:5,5 kW Chip conveyor:   yes  Length:          3.200 mm  Width:           1.900 mm  Height:          2.100 mm  Weight:        ...

Key data: 1030 Fanuc, 1650 18i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Key data: 720 Fagor, 3000 8055

Turning diameter: 720 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: Fagor CNC Model: 8055 Swing over bed Ø:        720mm Swing over cross slide Ø:470mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           17kW Bed width:               430mm Tailstock spindle Ø:     100Ø Stroke pinole:           200mm Spindle taper:           5Mk Workpiece weight:        2.560Kg Speeds / ranges:         1600Rpm Feed rate X-Axis:        8.000mm/min. Feed rate Z-Axis:        8.000mm/min. Length:                &n ...

Key data: 530 Okuma, 1000 OSP-U100, 12

Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis:         280mm Z-Axis:         1.000mm Spindle bore:   100mm Speedrange:     4500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        90mm Length:         2.200 mm  Width:          2.000 mm  Height:         2.200 mm  Weight:         6.200 kg 

Key data: 630 _Unknown / Other, 3000 Style

Turning diameter: 630 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Style C-Axis Barufaldi Revolver 8 positions live driven tools SCHUNK chuck Renishaw taster Under power 02.2022 Swing over bed Ø:        630mm Swing over cross slide Ø:405mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           40kW Bed width:               450mm Tailstock spindle Ø:     105Ø Stroke pinole:           225mm Spindle taper:           5Mk Workpiece weight:        1.500Kg Speeds / ranges:         2000Rpm Feed rate X-Axis:        8.000mm/mi ...

Key data: 850 Fanuc, 1350 Oi, 12

Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

Key data: 1380 Siemens, 15000 Sinumerik 850

Turning diameter: 1380 mm Turning length: 15000 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Sinumerik 850 Swing over bed Ø:        1.380mm Swing over cross slide Ø:1.200mm DBC Turning Length:      15.000mm Spindle power:           98kW Tailstock spindle Ø:     230Ø Stroke pinole:           300mm Workpiece weight:        23.000Kg Speeds / ranges:         600Rpm Length:                  20.000 mm  Width:                   6.000 mm  Height:                  3.000 mm  Weight:                  60.000 kg  12 ...

Key data: 1380 Siemens, 10000 Sinumerik 850, 12

Turning diameter: 1380 mm Turning length: 10000 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik 850 swing over carriage 1200 4 chuck 1200 mm open steady rest motorized tailstock C Axis 360.000 work load 18.000 Kg Max. turning Ø:1.380mm X-Axis:        640mm Z-Axis:        10.000mm Spindle bore:  80mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:12 Stroke pinole: 300mm Quill Ø:       230mm Length:        13.000 mm  Width:         4.500 mm  Height:        3.000 mm  Weight:        40.000 kg