machining center used for sale

C.M.S ATOM 5-axis machining center Year 2016 This is a machine for machining soft materials (machinable board, foam) More information under request

The VF-2TR is a versatile 5-axis machining center based on the popular VF-2 VMC platform. It provides full simultaneous 5-axis motion, or can position a workpiece to almost any angle for machining. X : 762 mm Z : 406 mm Z : 508 mm

x-travel: 1050 mm y-travel: 520 mm z-travel: 510 mm control: M 730 BM number of spindle speeds: 13000 tool taper: MAS BT 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm table surface area: 1350 x 600 mm table load: 1,2 t distance spindle /table: 150-660 mm numbers of tools in magazin: 30 diameter of tools max.: 80 mm tool length - max.: 300 mm weight of tools max.: 8 kg tool changing time: 1,3 sec change-time chip to chip: 3 sec rapid travel x/y/z: 1-30 m/min feed: 1-30000 m/min Number of axles: 3+1 St. total power requirement: 25,7 kVA weight of the machine ca.: 7 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machining Center Mori Seiki NVX 5100 II/40, built 2012, with 3+1 axes Machining hours: under power ON/OFF 32.499h working hours 8.595h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

Used Cernatto Marvel HT 450 Machining center - vertical three-axis machining centre with Selca CNC. Dim axes X=850, Y=450, Z=450 year 1995. For sale due to lack of use The machine has some errors when it is turned on, it requires intervention by a technician, it was turned off several months ago. Complete with cooling unit, 5000 rpm spindle motor.

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

This Quaser UX600/15C Vertical Machining Center was manufactured in the year 2015 in Taiwan. It is a 5 axis machine with direct measurement on all axis operated by a Heidenhain iTNC 530 control. With SK40 and 15000 rpm it is the ideal solution for sophisticated simultaneaous machining.

This DOOSAN VCF 850LSRII Vertical Machining center was manufactured in the year 2022 in South Korea. It is equipped with a 3,000 mm X-axis travel and controlly by a FANUC 31iB5 Plus control unit. The machine has 5-axis with a spindle speed of 12000 rpm. It is like new as only operated for 758 cutting hours. The VCF series is a perfect solution for multi-purpose machining for supreme rigidity. Machine has CE Conformity. See photo and video gallery for more impressions.

This 5-axis vertical machining center was manufactured in 2003. The HAAS VR-11 features extensive travel capabilities with 3050 mm in the X-axis, 1016 mm in the Y-axis, and 762 mm in the Z-axis, ensuring large-scale precision. Its equipped with a HAAS-based control unit for intuitive operation, a 15,000-rpm spindle for high-speed machining, and through-spindle coolant to enhance tool life and chip removal. Consider the HAAS VR-11 machine we have for sale for its advanced features and versatility. For more details, please contact us.

This 4-axis vertical machining centre was manufactured in 2018. Equipped with a controlled 4th axis (HRT300), it boasts a main spindle speed of 15000 rpm and 30 tool slots for versatile operations. Renishaw tool setting ensures precision, while internal cooling via the main spindle enhances efficiency. With 22856 total running hours, this HAAS VF-3SS is meticulously maintained, resembling a new machine. Consider this Haas VF-3SS vertical machining center for a seamless production experience. For further information, please contact us.

This 3-axis vertical machining center was manufactured in 2005. The Hardinge Bridgeport VMC 1000 P3 is equipped with a HEIDENHAIN control unit, ensuring high precision and ease of operation. It boasts a spindle speed range up to 10,000 1/min and features substantial movements in X, Y, and Z-axis at 1020 mm, 560 mm, and 560 mm respectively. A notable benefit is its 20 tool changer, which enhances operational efficiency by reducing tool changeover times. This Hardinge Bridgeport VMC 1000 P3 machine we have for sale is designed to meet demanding machining needs. Please reach out to us for further details.

This 5-axis ALZMETALL GS600E was manufactured in 2015. Key features include a Heidenhain TNC 640 control system, 18,000 rpm spindle with HSK A63, and cutting-edge chip conveyor for impeccable coolant cleaning. Its fitted with tool measuring via laser and a working probe for higher accuracy. The machine offers extensive production capabilities with its automatic door and air sealing for the linear measuring system, ensuring efficiency. This machine represents exceptional value for precision machining needs. Contact us for further details regarding this ALZMETALL GS600E universal machining center.

This 3-Axis FEELER VMP 40A vertical machining center was manufactured in 2019. Equipped with a FANUC OiMF control, it features a spindle speed of 10000 rpm and spindle motor power of 15 kW. Table dimensions are 1150x520 mm, and it includes a 30-station tool magazine. Additional features include a chip conveyor and electrical cabinet air conditioning. Consider this FEELER VMP 40A for precision machining capabilities. Contact us for further details.

This 5-axis EXERON HSC MP 11/5 was manufactured in 2019, featuring a robust HEIDENHAIN iTNC530 control and a high-speed spindle capable of reaching 36,000 rpm. It supports complex geometries with a B axis of ±105° and a C axis that rotates infinitely. The maximum loading capacity is 350 kg, ideal for heavy-duty machining. Consider the opportunity to buy this EXERON HSC MP 11/5 vertical machining center. Contact us for further details regarding this machine

This 4-axis HURCO HTX 500 horizontal machining center was manufactured in 2010, featuring a large work cube with 28” x 24” x 24” travels and a dual pallet system for enhanced productivity. It boasts a high-speed 12,000 RPM spindle, a powerful 24 HP spindle motor, and rapid traverse rates up to 1,260 ipm. Ideal for rigorous milling tasks, the HURCO HTX 500 machine we have for sale represents a significant asset for any machining facility. Reach out for more information.

Operating Instructions FMB Machining Center / Version 9. June 2011. Machining centres Software from Schüco installed Software design Special machines Operating instructions 7. technical data 7.1Machine dimensions Total length mm 9,750 Total depth / with LS mm2.750 / 3.300 Total height max. mm4.100 7.2 Axle travel X-axis mm approx. 7,100 Y-axis mm approx. 1,480 Z-axle bucket 710 V-axis (optional)mmca 6,980 A axis (optional)degrees180 ° Gajs30zga C axis (optional)degree360 ° W-axis (optional)mm 7.3Working spindle Spindle drive kW7.5 Spindle speedmin-120.000 Spindle mounting HSK E40 7.4Tools Mounting HSK E40 Wkzg positions 6 (more optional) 12 Wkzg maximum diameter mm 35 Saw blade Ø for milling spindle mm 400

Description: MULTIAX C113/REX CNC Machining Center 3 axis changing units - yes control - to be confirmed drilling spindels horizontal y-axis - yes drilling spindels vertical x-axis - yes drilling spindles horizontal x-axis - yes drilling spindles vertical y-axis - yes Nesting machining - Flat table Rexilon path-feed rate max. X-axis - 60 mts/min path-feed rate max. Y-axis - 60 mts/min path-feed rate max. Z-axis - 30 mts/min vacuum pump - 1 vacuum pump: 1 m³/h, path-feed rate max. X-axis: 60 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 30 m/min, changing units: yes, control: to be confirmed, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,800 x 2,700 mm, weight approx.: 4,500 kg

x-travel:400 mm y-travel:510 mm z-travel:510 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:350 mm table load:200 kg spindle speeds:20000 1/min. spindle drive:10/17 kw spindle taper:63 HSK rapid traverse in x-y-z axis:36/36/30 m/min Tool changer:40 fach weight of the machine ca.:7 t Machine size (LxWxH):2,150×3,104×3,121 mm high speed directl spindle motor:20000 1/min CNC controller:HEIDENHAIN TNC640 (15" LCD) (5-X simultan) chip conveyor - auger:im Bett inner coolant:70 bar Workpiece measurement:Vorbereitung für BLUM autom. lube system:LHL-X100-7 Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TNC640 (15 "LCD MONITOR) Our Taiwanese supplier is the largest manufacturer in Taiwan and also builds lathes and machining centers for well-known Japanese manufacturers. The delivery wa ...

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

HWACHEON VESTA 1050B 8K milling center equipment - cooling through the spindle - chip conveyor - probes - cone BT-40 Technical parameters of the HWACHEON VESTA 1050B 8K machining center - CNC control: FANUC Series Oi-MD - table size: 1150x600 mm - range of movements of the X/Y/Z axis: 1000/600/600 mm - maximum table load: 1000 kg - spindle rotation speed: 8000 rpm - spindle power: 18.5/15 kW - feed speed: 1-10000 mm / min - spindle torque: 481/293 Nm - number of tools: 24 - cone: BT-40 (BT-50) - coolant tank capacity: 340 l - machine weight: 7200 kg

MORI SEIKI SH-503 4-axis horizontal machining center manufactured in 10/2000 in Japan by Mori Seiki CO. LTD. The CNC milling machine is equipped with the Mori Seiki MSC-501 numerical control. -Cone BT40 chain 120 tools -HP spindle center coolant pump -Roto pallet 2 pallets -2 4-sided cubes - CNC control : MORI SEIKI MSC-501 - machine weight: 10100 kg -In working order -Price excl. dismantling, loading and transport

Used Famup MCX 600 ECO Machining center - vertical Spindle revolutions with refrigenerant: 10000 revolutions / min Spindle power: 5.5 kW Tool type: ISO 40 tool cone tie rod Tool magazine: N ° 18 Maximum tool mass: 6 Kg Pneumatic connection: 6 Bar System air flow: 3000 L / h Working strokes: X 600 mm - Y 400 mm - Z 400 mm X axis work feed: 0.166 m / s Rapid feed X axis: 0.3 m / s Y axis work feed: 0.166 m / s Y axis rapid feed: 0.3 m / s Z axis work feed: 0.166 m / s Rapid Z axis: 0.3 m / s Distance between spindle and table min - max: 140 - 540 mm Useful surface: 800 x 375 mm T-slots: 3 T-slot center distance: 125 mm T-slot width: 14 mm Max load allowed on the table: 250 Kg Distance table - ground: 850 mm Memory: 2 Gb hard disk Power supply: 400V - 50Hz Overall dimensions: 2010 x 2750 x 2900 h mm Weight: 3500 Kg

Machining center Hartford S - plus 10 is in very good technical condition, it is possible to see it in operation. Other informations: - control system Heidenhain TNC640 +15 LcD - Co-04 spindle cooling - cooling nozzles around the spindle - spindle blow through the air - oil separator (standard type - container form) - centralized automatic lubrication system - chip conveyor - manual - OMP60 optical workpiece probe included Manufacturer HARTFORD Machine type S - plus 10 Year of production 2016 Basic parameters 1150 x 520 mm Technical parameters: Table clamping surface: 1150 x 520 mm Longitudinal table movement - x axis: 1020 mm Transversal table movement - y axis: 520 mm Table vertical movement - z-axis: 550 mm Spindle taper: 40 Spindle speed: 12000 rpm Seating capacity: 24 pcs Max. workpiece weight: 700 kg distance from spindle end to table center :: 100-650mm  ...

This POSMILL E 2050 L HSCI Vertical Machining center machine was manufactured in the year 2015 in Germany and has 2750 spindle hours (since spindle renewal in April 2021). It is equipped with a HEIDENHAIN iTNC 530 control unit and HSK 63. The machine has new inline spindle, new spindle motor and new rotary union (April 2021). It comes with inner cooling through spindle 20Bar with belt filter, tool changer 60 compartment, 3D probe Blum, tool measurement Blum laser, Heidenhain handwheel, blowing air spindle center and operation mode 4. Upon request and for additional cost approx. 250 HSK holders and drill chucks are available (partly new / partly used).

x-travel:560 mm y-travel:560 mm z-travel:600 mm control:Fanuc 16 iMA rapid travel x/y/z:84 / 84 / 94 m/min feeds x/y/z -stepless:50000 mm/min spindle drive:22 kW spindle speed::50 - 14000 1/min max. torque on the spindle:156 Nm size of pallet:400x400 mm numbers of pallets:2 table load:500 kg working diameter:630 mm workpiece - installed height:1000 mm change time of pallets:10 sec distance spindle center to table:80 -640 mm Distance spindle nose - pallet centre:70-670 mm tool magazin::60 x HSK-A 63 tool changing time:1 (4) sec max. tool weight:8 kg max. tool diameter:70 / 170 mm tool length - max.:360 mm total power requirement:64 kVA weight of the machine ca.:9 t dimensions of the machine ca.:15 m² Macro B:600 Variables This well maintained horizontal machining center has a full 4th axis, twin pallet changer, 60 tools magazine for HSK-A 63 toolholders and coolant through spindle 50 ba ...

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

CNC Vertical Machining Center MORI SEIKI mod. SV-503 Manufacturer: Mori Seiki Model: SV-503 YOM: 2001 Technical details: Table size: 1300x600 X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 660 mm Spindle drive motor: 30 HP Spindle speed: 10000 rpm Tool changer: 30 ATC Spindle taper: 40

CNC machining center cover MAHO DMC 60 U hi-dyn, 2 pallets, head universal Year: 2002 country of origin: Germany workspace: X: 600 mm Y: 700 mm w: 600 mm pallet 630 x 500 mm spindle speed: 18 000 RPM tool Magazine: 120 St Tool holder: SK 40 control CNC HEIDENHAIN 422 weight: 9 000 kg total connection requirements: 44 kVA

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

Table length: 1150 mm Table width: 510 mm Longitudinal X: 1000 mm Cross Y: 585 mm Vertical Z: 615 mm Positions ATC: 16   Positions APC: 0   CNC Brand: Heidenhain MACH-id   4215 MAKE       FAMUP / Emco ITALIA TYPE         MCX 1000 YEAR        200. SPECIFICATIONS X - Travel    1000 mm Y - Travel     585 mm Z - Travel      615 mm Controll        TNC 430 Table Length x Width       1150 x 510 mm Table load in kG      800 Kg Spindle Taper     Bt 40 kW power on spindle   18.5 kW Spindle speeds / ranges     8000 Rpm ATC tool changer        16 Number off controlled axis     3 DIMENSIONS Length    4100 mm Wi ...

Table length: 940 mm Table width: 420 mm Longitudinal X: 840 mm Cross Y: 420 mm Vertical Z: 600 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Fanuc CNC Model: OM Make Supermax 76 V Type VMC 76 V Year 2001 Supermax with FANUC OM machining center Table length (mm) L = 940 Table width (mm)W = 420 Longitudinal X (mm)X = 840 Cross Y (mm)Y = 420 Vertical Z (mm)Z = 600 Sk 40 / 8000 Rpm 22 Pos tool changer incl. 4e axis !  

Vertical machining center make BRIDGEPORT type Interact 412Machine -No: 73440A built in 1988Table size: 840 x 320 mmTravel X: 450 mmTravel Y: 310 mmTravel distance Z: 300 mmMax. Table load: 250 kgSpindle speed: 40 - 4000 rpm.Spindle mount: ISA 40Feed range: 0 - 4.5 / 7.5 m / min.Rapid traverse: 12 m / min.Number of tools in the changer: 12Max. Tool diameter: 75 mmMax. Tool length: 250 mmMax. Tool weight: 6.0 kgTool change time: 8,0 sec.Drive power: 5.5 / 3.7 kWWeight approx: 2,3 tOutside dimensions approx: 1910 x 1850 x 2000 mmWith- Heidenhain TNC 355 CNC control- Vice- several tool holdersused, in working order, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM.  ...

KITAMURA Mycenter H600B Horizontal Machining Center Available 2 machines. Serial No. 45030 & 45031 Control FANUC 11M X/Y/Z- 1016/813/765 Table 630x630 mm Load capacity 1200 kg Index resolution 5° Pallet station Distance table-spindle 20-833 mm Spindle taper NST 50 Spindle speed 20-3500 rpm Rapid Feed 12.000mm/min Cutting Feed 1-5.000mm/min ATC- number of tools 60 Max. Tool size/weight 150 mm/20 kg ATC- umber of tools 60 Spindle motor power 15 kW Machine Weight 14 t

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC portal machining center make PORTATEC type PBZ 30/18Year of construction 1999Table mounting and processing surface X u. Y: 3000 x 1800 mmvertical processing height Z: 300 mmSpindle mount: ISA 30Number of tools in the magazine: 8Passage between the uprights of the portal: 2080 mmSpindle speed: 1500 - 24000 rpm.External dimensions approx: 4000 x 2500 x 1800 mmDrive power: 7.5 kWWith- Portatec-Siemens control- Tool changer- Vacuum pump for table clamping- add. Pre-head clamping on the table- dedusting system- Handheld remote control device- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center Fabr. LEADWELL type TDC 450Machine -No: LISIE0304 built in 1995X-axis: 450 mmY-axis: 350 mmZ axis: 250 mmTable mounting surface: 660 x 350 mmSpeed range milling: 10000 rpm.Tool holder: BT 30Feed range: 1 - 12000 mm / min.Rapid traverse longitudinal / transverse / vertical: 36 m / min.Total power requirement: 10 kWDimensions approx: 1700 x 2400 x 2600 mmWeight approx. 2.0 tonsWith- Fanuc controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal CNC machining center make MATSUURA type MC 600 H - 45Masch. -No: 870706216 Year of construction 1987Table work area: 450 x 450 mmTable longitudinal path X: 600 mmvertical travel of the headstock Y: 450 mmStander traversing Z: 480 mmTable index increment: 0.001 mmMax. Table load: 500 kgNumber of tools in the changer: 50Distance table spindle axis: 85 - 525 mmCenter of table spindle: 125 - 605 mmSpindle diameter: 80 mmSpindle mount: BT 40Spindle speed: 30 - 6000 rpm.Rapid traverse XYZ: 15000/15000/15000 mm / min.Feed rate stepless: 1 - 5000 mm / min.Drive power: AC 7.5 / 11 kWWeight: 8200 kgWith- CNC control Fanuc 11 M- Number of change tables 2- a lot of tool holders- 14461 operating hours- Chip conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Err ...

CNC machining center for wood/plastic and composite materialMake REICHENBACHER type Vision - 1, year of construction 1999Technical specifications:Travel X:3740 mmTravel Y:1680 mmTravel Z:340 mmC axis = rotation: +/- 360°Feeds axis speed: 60 m/min.Feed web speed: 85 m/min.Z axis: 20 m/min.C axis:90°/sMilling unit speeds: 1500 - 18000 rpm.Tool holder: SK 40Distance table and spindle min./max.: 80 / 420 mmEnd mill diameter: 24 mmProfile milling cutter diameter: 100 mmTool changer slots:12Tool length max.: 200 mmTool diameter max.: 200 mmTool mass per piece / total: 6 - 50 kgTable size: 3800 x 1500 mmDrive power: 25 kWWeight approx.: 6.5 tWith- Drilling unit spindle speed 4500 rpm., 2.2 kW- Vacuum / grid table- CNC control Siemens 810 D with central unit CCU2 and software module MMC 103- Compressed air requirement 300 - 500 L/min.- Filter systemused, in good conditionPrice on request.Deli ...

Vertical machining center make AXA type VSC 0 - 3000 MMachine -No: 84983, built in 1990X-axis stroke: 2 x 1200 mm / 3000 mmY-axis stroke: 300 mmZ-axis stroke: 300 mmTool holder: ISA 40Tool changer for: 30 shotsSpeed range: 0 - 6000 rpm.Rapid traverse: 0 - 15 m / minFeed: 1 - 10,000 mm / minDrive power: 11.2 kWOutside dimensions approx: 5400 x 2100 x 2900Weight approx: 6.5 tWith- CNC control HEIDENHAIN TNC 355- Ball screwsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical machining center make KIRA type VTC 30Machine -No: 31028 Year 1989traverseX: 430 mmY: 250 mmZ: 300 mmSize work table: 500 x 305 mmTable load capacity: 200 kgRapid traverse: 20 m / minTool magazine - memory locations: 10Max. Tool weight: 3 kgMax. Tool length: 200 mmTool change time: 2 sec.Max. Drilling capacity: 18 mmTapping performance: M 14Milling capacity: 15 cm³ / minSpeed range (stepless): 120 - 8000 rpm.Tool holder: SK 30Drive power: 3.7 kWWeight machine: 1.8 tExternal dimensions machine: 1250 x 2100 x 2300 mmWith:- CNC path control Fanuc Series 0-Mate M- 10-fold tool changer- Several tool holdersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Vertical machining center make SIGMA type EK 150 PYear 1989 with table pallet changerCross table travel X: 1500 mmTable longitudinal travel Y: 800 mmSpindle perpendicular Z: 750 mmTable surface: 1900 x 750 mmMax. Table load: 3.5 tSpindle mount: ISA 50Spindle speeds: 20 - 4000 rpm.Max. Drilling capacity: 60 mmThread cutting capacity: M 48Milling capacity: 450 cm³ / min.Working feed: 0 - 10000 mm / min.Rapid feed: 15000 mm / min.Distance spindle axis / guides: 890 mmDistance spindle / table min./max.:150 / 900 mmDrive power: 26 kWWeight approx: 16 tOutside dimensions approx: 3710 x 4100 x 3520 mmWith- Tool changer with 40 tool placesxa0xa0xa0Max. Tool diameter 120/200 mmxa0xa0xa0Max. Tool length 400 mmxa0xa0xa0Max. Weight of each tool 20 kgxa0xa0xa0Tool change time 5,0 sec.xa0xa0xa0Span to Span time 11 sec.- 2 workpiece changing tablesxa0xa0xa0Max. Load of pallet 2.5 txa0xa0xa0Pallet chan ...

Vertical machining center make CHIRON type FZ 12 S high speedFabr. -No: 114-30 built in 2000X-way: 550 mmY-way: 300 mmZ-way: 425 mmTable size: 950 x 350 mmMax. Table load: 500 kgRapid traverse speed: 40000 mm / minTool change device: 12 Pos.Spindle mount: ISO 30Spindle speeds: 20 - 10500 rpmSpindle drive motor: 5.5 kWTotal power requirement: 15 kVAWeight approx: 3590 kgDimensions approx: 2000 x 3000 x 2500 mmWith- Coolant device- Chip conveyor- Control Siemens Sinumerikused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center make DECKEL-MAHO type DMU 80 TBuilt in 1995Technical specifications:Table length: 1100 mmTable width: 650 mmLongitudinal path X axis: 800 mmCross travel Y axis: 650 mmVertical travel Z axis: 550 mmNumber of tools in the changer: 25Tool diameter: 80 mmMax. Tool length: 315 mmTool holder: ISO 40Spindle speed up to: 6300 rpm.Feed speed: 1 - 15000 mm / min.Rapid traverse: 15 m / min.Total power requirement: 29 kWWeight approx .: 5500 kgDimensions approx .: 3100 x 2300 x 2500 mmWith- large work table- electronic handwheel- HEIDENHAIN Millplus control- separate 4th controlled axis manufactured by Walther- chip conveyor- approx. 15 tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and ar ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

Matsuura MX-520 5 axis machining center 20.000 rpm Machine is in excellent condition X : 630 mm Y : 560 mm Z : 510 mm

Machine in very good condition. Deckel Maho DMC 63V Vertical Machining Center 2003

Handtmann PBZ NT 800 Machining center - vertical The machine is located in France.

Haas VF2 CNC Vertical Machining Center 3 axis: 762x406x508 mm

Haas UMC 750SS 5 axis machining center Machine is like new Magnetic table(never used) Tools re included(value is around 25.000 USD)

Quaser MV 184C Vertical Machining Center Machine is like new condition