lynette used for sale

swing diameter: 200 mm centre height: 300 mm weight of the machine ca.: 75 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 125 mm centre height: 400 mm weight of the machine ca.: 150 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter:175 mm centre height:255 mm bed width:190 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:450 x 130 x 500 mm

swing diameter:140 mm bed width:255 mm centre height:320 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:510 x 140 x 610 mm

swing diameter:160 mm centre height:300 mm bed width:280 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:610 x 100 x 650 mm

Key data: 580 mm, 1000 mm, 400 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 750 mm turning diameter in the gap: mm turning speeds: 32 - 2000 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 420 mm turning diameter over slide rest: 250 mm turning length: 1000 mm turning diameter in the gap: 580 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 4,4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 1,94 x 0,85 x 1,32 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630 mm turning diameter over slide rest: 360 mm turning length: 2000 mm turning speeds: 20 - 1120 U/min centre height: 315 mm spindle bore: 105 mm tailstock quill taper MT: 5 MK tailstock travel: 250 mm tailstock quill diameter: 100 mm travel -x axis: 370 mm travel -z axis: 1370 mm rapid traverse X-axis: 6000 mm/min rapid traverse Z-axis: 7000 mm/min bed width: 560 mm total power requirement: 11 kW weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,5 x 1,6 x 1,85 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 178 mm turning length: 1000 mm turning diameter in the gap: 450 mm turning speeds: 70 - 2000 U/min centre height: 165 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 1,1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,9 x 0,72 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L + Z lathe WEWAG model 250 / 1500 Factory no. 20953 Year of construction approx. 1975 Distance between centers 1500 mm Nominal turning diameter over bed 500 mm Turning diameter over bed max. 510 mm center height above bed 255 mm turning diameter over support 300 mm center height above support 150 mm spindle bore 56 mm spindle speed 18 - 1800 rpm. 24 steps lathe chuck holder short cone DIN 55022 Tailstock inner cone MK 5 Drive power 4 kW and 6.7 kW pole switchable - 3-jaw chuck BISON, 250 mm with one set Hard step jaws steel holder 4-fold for turning - fixed Lynette - Control cabinet fixed to the back of the machine weight 2500 kg; used

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2,5 x 1,1 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 506 mm turning speeds: 45 - 1800 U/min centre height: 180 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,2 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Bezel, stick, lynette -Max. Passage: Ø 90 mm -Tip height: 100 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 280/280/H110 mm -Weight: 8 kg

Bezel, stick, lynette -Max. Passage: Ø 98 mm -Tip height: 180 mm -Edition: steel -technical drawing with the photos -Dimensions: 410/330/H85 mm -Weight: 10 kg

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 635 mm turning diameter in the gap: 480 mm turning speeds: 58 - 2500 U/min centre height: 167 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 2000 mm turning diameter in the gap: 840 mm turning speeds: 36 - 1600 U/min centre height: 330 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 11 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,6 x 1,1 x 1,45 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, stick, lynette -Max. Passage: Ø 105 mm -Tip height: 185 mm -Edition: steel -technical drawing with the photos -Dimensions: 430/370/H105 mm -Weight: 18 kg

Bezel, stick, lynette -Max. Passage: Ø 60 mm -Tip height: 105 mm -Edition: gunmetal -technical drawing with the photos -Dimensions: 220/220/H45 mm -Weight: 3.6 kg

Bezel, stick, lynette -Max. Passage: Ø 110 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 440/320/H80 mm -Weight: 13.6 kg

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

Bezel, stick, lynette -max: passage: Ø 210 mm -Top height: 300 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 660/600/H120 mm -Weight: 59 kg

Bezel, stick, lynette -Max. Passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Bezel, stick, lynette -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Bezel moving with, bezel, steady rest, lynette -Max. Passage: Ø 70 mm -Plating: brass -Hole spacing: 295 mm -Tip height: 135 mm -Weight: 4 kg

Bezel, stick, lynette -Max. Passage: Ø 70 mm -Tip height: 200 mm -Drawing with the photos -Weight: 8 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 134 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Drawing with the photos -Dimensions: 560/350/H440 mm -Weight: 36 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 395 mm -Tip height: 240 mm -Drawings with the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

Moving steady rest, moving steady rest, steady rest, lynette -max: passage: Ø 140 mm -Edition: gunmetal -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg

Bezel, stick, lynette -Max. Passage: Ø 150 mm -Tip height: 320 mm -Dimensions: 650/500/H110 mm -Weight: 50 kg

Bezel, steady rest, lynette -Bezel: max. passage O 90 mm -Center height: 155 mm -Condition: Gunmetal -technical drawing: with the photos -Dimensions: mm -Weight: 6kg

Bezel, steady rest, lynette -Bezel: center height: 130 mm -Dimensions: see photos, technical drawing -Dimensions: 220/45/H270 mm -Weight: 5.1 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Edition: gray cast iron -Hole spacing: 160 mm -Tip height: 150 mm -Drawing with the photos -Number: 1x bezels available -Price: per piece -Dimensions: 430/230/H110 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 120 mm -Tip height: 115 mm -Drawing with the photos -Dimensions: 380/260/H65 mm -Weight: 8 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe M4L -Max. Passage: Ø 500 mm -Center height: 390 mm -technical drawing: with the photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

Moving steady rest, moving steady rest, steady rest, lynette -max. passage: Ø 80 mm -Edition: gray cast iron -Hole spacing: 340 mm -Tip height: 150 mm -Dimensions: 390/70/H320 mm -Weight: 12 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Plating: brass -Hole spacing: 340 mm -Tip height: 200 mm -Drawing with the photos -Dimensions: 400/260/H430 mm -Weight: 26 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 80 mm -Edition: gunmetal -Hole spacing: 90 mm -Tip height: 165 mm -Drawings with the photos -Dimensions: 210/190/H330 mm -Weight: 8 kg

Bezel moving with, bezel, steady rest, lynette -Max. Passage: Ø 80 mm -Plating: brass -Hole spacing: 210 mm -Tip height: 135 mm -Weight: 8 kg

Bezel, stick, lynette -Max. Passage: Ø 70 mm -Tip height: 250 mm -Weight: 10 kg