jenbacher gas generator used for sale

Gasket set for Scheider compressors for sale. 7 pieces available in original packaging, other unsorted seals also

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Water-cooled welding machine, display and welding programs. Programs for mild steel, stainless steel and ALU. The device is in good ready-to-use condition. Welding current can be adjusted on the torch. Burner is water-cooled. Absolute professional device at a bargain price

Gas-shielded welding machine with pulse function, MIG/MAG pulse welding system max. welding power: 330 A Remote control connection 4-roller drive Water-cooled with: detachable wire feeder incl. ground cable Gas fitting Dimensions: 655/900/H1495 mm Good condition.

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

With pallet

Approx. 50m

100kgs cap.

unused

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Messer Cortina oxy-fuel cutting year 2001 fully functional, retrofitted in 2019, hyperterm control four torches maximum cutting thickness 150 mm complete with suction bench 12,000 Per 2500 excluding aspirator

Gasket kit BOSCH 1817010933 H32X16NCHEVPOLYU New ! Dimensions ( packaging ): 97 x 85 x 25 mm

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

Charvet S.A. s/s cooking vessel, type: A, gas heated, inside dimensions: 700 mm x 640 mm x 580 mm, total dimensions: 1180 mm x 1100 mm x 1300 mm.

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

2 x SOLAR SATURN 20 for sale. Package is complete, still installed and now FOR SALE 1.1mw each... Total 2.2 mw serious inquires and end user buyers only please email for further information. Basic details will be uploaded soon here on this page.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used.

Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly.

Cloos MIG 350 Synergic - Welding machine - Metal invert gas welding (MIG) and metal active gas welding (MAG) of steel, aluminum and chromium-nickel - Incl. operating instructions - Built in 2007 Specification Entrance: - Nominal input voltage: 3/PE AC 400 V - Nominal frequency: 50 Hz - Maximum input current: 23 A - Mains fuse sluggish: 32 A - Mains connection cable: 4 x 4 mm² - Power plug: 32 A Exit: - Open circuit voltage Uo: 18 - 45 V - Welding range: 30 - 350 A - Duty cycle 100 %: 220 A - Duty cycle 60 %: 280 A - Duty cycle 40 %: 350 A General data: - Noise emission: < 70 dB(A) - Schutart: IP 23 - Cooling type: AF - Dimensions WxHxD: 430 x 930 x 980 mm - Weight: 160 kg

Inert gas welding device, inert gas device -Max. Welding power: 260 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Intermediate hose package: 2 m -Gas valve -Hose package: 2.5 m -Dimensions: 1000/460/H1340 mm -Weight: 148 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gas solenoid valve -Connection: 220/240 V 50/60 Hz -Pe.: 1800 mbar -Weight: 1.7 kg

Offer 22673 Specifications: - Welding current max. 500 A 60% d.c. - 375 A 100% d.c. - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 500 A - Separate wire feeder case with intermediate package 15 m - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke – regulation - Digital volt + amp display -Spot welding - Interval welding - water-cooled hose package 4 m - Ground cable 10 m -Reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 300 kg

Gas spring HAHN G10 23 120 1 340 AU19 AU19 370N hole diameter: 8 mm Dimensions: 360 x 23 x 23 mm

Gas spring HAHN G10 23 250 1 600 AU19 AB11 600N 12/05 hole diameter: 8 mm Dimensions: 620 x 23 mm

Gas Flow Controller TYLAN MILLIPORE FC-2900V-4V Gas: SiH4 P: 10 - 40 PSID Dimensions: 125 x 125 x 40 mm

Gas flow controller TYLAN MILLIPORE FC-2910V-4V Dimensions: 125 x 125 x 40 mm

Gas Flow Controller TYLAN FC 2900V 4V 1 SLPM N2 Viton Gas: N2 Gas flow rate: 1 SLPM Dimensions: 125 x 125 x 40 mm

Gas flow controller TYLAN FC 2900V 4V 1 SLPM O2 Viton Gas: O2 Gas flow rate: 1 SLPM Dimensions: 125 x 125 x 40 mm

Gas flow controller TYLAN FC 2910V 4V 20 SLPM N2 Viton gas: N2 Gas flow rate: 20 SLPM Dimensions: 125 x 125 x 40 mm

Gas Flow Controller TYLAN MILLIPORE FC-2900V-4V Gas: N2 Gas flow rate: 1000 sccm P: 10 - 40 PSID Dimensions: 125 x 125 x 40 mm

Industrial gas spring, gas spring Eriks RX-GF-28-300-AA-700 stroke 300 mm extended 662 mm extension force 700 N

Gasket kit for ball valves, 1 piece END ZAD10029 series ZA Size: 21/2 Material: PTFE / FKM New ! Dimensions: 200 x 200 x 100 mm

Industrial gas spring, gas spring Eriks GS-19-250-CC-100N stroke 250 mm extended 564 mm extension force 100 N

Flat gasket, 10 pieces PAGUS DN150 diameter: Ø 150 / 198 mm material thickness: 4 mm Material: NBR New ! Dimensions ( packaging ): 210 x 210 x 50 mm

Flat gasket, 15 pieces PAGUS DN175 diameter: Ø 175 / 223 mm material thickness: 2 mm Material: NBR New ! Dimensions ( packaging ): 230 x 230 x 60 mm

Gasket, cork gasket, 2 pieces ABB 2152-0197-93 Material: Cork Material thickness: 1.2 mm New ! Dimensions ( packaging ): 240 x 200 x 10 mm

Industrial gas spring, gas spring Eriks RX-GF-19-200-CC-200 stroke 200 mm extended 464 mm extension force 200 N

Sample gas pump, vacuum pump BÜHLER P2. 2 ATEX 426112119900RP 001 100149228 Material: PTFE, PVDF Motor: ATB ENBFY63/4C-11 0.09 kW 1440 rpm 220 - 240 V 1AC explosion-proof ! used, checked ! Dimensions: 290 x 190 x 240 mm

Gas Analyser TRAILIGAZ TLG.M AFX IN2000-5 Dimensions: 490 x 460 x 250 mm

Gas sampler, gas detector BERNT GmbH GP-2000 nominal flow rate: 0.5 l/min Dimensions: 305 x 250 x 140 mm

Gas pressure regulator GASELAN Type: GSDL-B Schl.-Nr EL 135 653 451 Type: L-M Schl.-Nr EL 135 53 450 Pa: 30 mmWs (3 mbar) Pv max: 500 mmWs (49 mbar) NW 50 New Dimensions: 380 x 310 x 400 mm

Gas pressure regulator with filter DUNGS Type: FRS 515 5 - 20 mbar pmax: 0,,5 bar Filter: WEISHAUPT Type: 515/1 pmax: 0.5 bar PN 1 DN 1 1/2 used, tested ! Dimensions: 480 x 200 x 270 mm

Industrial gas spring, shock absorber ACE GS-19-100 GS-19-100-AA-250N-K37712 A11-32530 < /br />Extension force: 250 N stroke: 100 mm rod: Ø 8 mm Shock absorber body: Ø 19 Thread: M8 Material: stainless steel ! New ! Dimensions: 285 x 20 x 20 mm