into used for sale

Key data: 304

DÜRR 304kW Eco+Energy ORC 300 HT module for Waste Heat Electricity Generation. Make and model: DÜRR Eco+Energy ORC 300 HT module Capacity: 304kW Hours: 0 Year: 2017 Module designed to run from the waste heat of a gas engine. New unused plant ready to operate. Heat Source: Gas Engine / Exhaust gas Admission temperature: 424°C No Usable heat: (3 605 kWth/ Genset) 1,815 kWth The ORC process is a thermodynamic cycle which uses thermal energy to generate electricity. Thermal oil as a heat source is led through the evaporator of the ORC module. The vapor of the working fluid flows under pressure into a turbo-generator sector, where some of the heat energy is converted into electricity. Subsequently, the working fluid is being liquefied in a water-cooled condenser, and again fed to the evaporator with a multi-stage feed pump. The condenser is executed as a double stage u ...

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma from Switzerland, type PBON15EKEM (150 litres) from 2017. The device is suitable for cooking, steaming, poaching, braising or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here, the electrical energy is converted into steam, working pressure 1.5 bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the finishing process by an energy-saving microprocessor control. Equipped with the therma touch control system for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedesta ...

DMG M1 Vertical Machining Center 12.000 RPM Machine is in excellent condition Control Unit Siemens 828D Internal Cooled Tool Measuring Probe Available Automatic part reset feature available It is a clean machine used only for aluminum material processing. Routine maintenance was done on time. It is in working condition at zero setting. It was not used in the intensive manufacturing process. Working hours: 6800 hours (May 2023) Max. travel 550 mm Max. travel 550 mm Max. travel 510 mm Max. workpiece length 550 mm Max. workpiece width 550 mm Max. workpiece height 400 mm Max. workpiece weight 600 kg ------ Most Asked Questions About DMG M1 Vertical Machining Center What is the Price of the DMG M1 Vertical Machining Center? Understandably, the first question on many buyers minds is the cost. Please contact us for the latest pricing and any available financing opti ...

Piston fillers measure and dispense free-flowing products, such as thin and/or moderately dense liquids. Each fill/release cycle consists of an intake stroke, where the product is withdrawn from the bin or hopper and into the product cylinder. The downstroke begins as soon as the product cylinder reaches its predetermined fill level. The piston pushes the product out of the cylinder and into the container. Characteristics Length: 1120mm Height (without stand): 670mm Height (with stand): 1600mm Width: 300mm

Tofflon bottling line manufactured in 2022 includes: 1. Sterilization depyrogenation tunnel, model FT0120 2. Vial washing machine, model FW02040 3. Filling and capping machine, model FF0604 4. Vial Sealer Model FC0230 5. Open restricted access barrier oRABS 6. Lyophilizer LYO-10 (CIP, SIP) -RBR All machines included in the line are joined through the appropriate conveyors or storage tables. Aseptic conditions are provided by an open barrier of limited access oRABS. The performance of all machines of the line is synchronized and is according to different bottle formats: 1. R2, R6 filling speed 100 bottles per minute 2. R20 filling speed 70 bottles per minute 3. R50 filling speed 35 bottles per minute Lyophilizer, model LYO-10 (CIP, SIP) –RBR Vial size 2R-50R Total usable shelf area: 9.77 m2 Number of shelves: 9+1 (upper reflective shelf) Capacity: 1.2R-44200 2.6R  ...

The belt mixer is a dynamic product mixing system. It is based on a container or vat that houses inside a tree with spirals specially made to achieve a uniform mixture of the materials that are introduced into the vat. The mixer is driven by an electric motor and a direct transmission mechanism from the reducer. The mixers have an orthogonal or worm gear reducer. The shaft is solid stainless steel and the blades are made of plate, also in stainless steel. For its part, the tank and the shaft are in a mirror polished finish. The mixer has a product intake mouth, a central material outlet and an inspection window. Finally, the opening of doors is regulated with magnetic detectors. In processes where it is required to mix a considerable amount of material, the installation of this type of mixers is essential. MMG mixers are available in a wide range of models to cover the needs of all our c ...

Tracked multi-saw SCM M3 No. 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm the sleeve is equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The  ...

Cosmec SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs  ...

Raimann KD31 340/200 double shaft multi-saw blade - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, t ...

Raimann KD31 double shaft multi-saw - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has ...

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

RAIMANN K23 250/120 crawler multi-saw, floating saw – after technical inspection - perfect condition – O&M documentation – movable disc with a fixed sleeve max. cutting height 120 mm max. cutting width 250 mm main engine 30 kW feed motor 1.1 kW feed speed from 5 – 50 m/min max. disc diameter 350 mm sleeve with a diameter of 80 mm shaft with a diameter of 60 mm movable shield min. material length 500 mm dimensions of the work table 800 mm x 1750 mm three rows of anti-ejection pawls feed adjustable on the gear motor central lubrication four pressure rollers from above machine dimensions (length/width/height) 185 / 150 / 220 cm weight 1850 kg Multi-saws are machines used in the wood industry mainly for cutting piles, but also for other purposes. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation i ...

ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...

Henan Daheng Machinery company model DHZH-130 Cartoning machine purchased in 2022 with commissioning done. Initially it was purchased to place a product inside 70mm (width) x 130mm (height) x 240mm (length) boxes, although it can be adjusted for other measurements. Box forming machine to introduce any type of product into 70x130x240 boxes automatically, brand new. The product is placed on the conveyor belt and the mechanized cardboard (boxes) at the other end. With the automatic counting function on the conveyor belt, the number of product units needed to enter a box is counted. This option is now with a conveyor belt and another input could be attached if necessary depending on the product. Once there are the desired units (1 to 20) the tape moves and is inserted into part 2 of the machine. While this action is taking place, the machine has already formed the boxes (formed) and when  ...

Automatic complete machine with shrink wrapping tunnel Automatic machine for packaging in thermal foil. It closes the package on 4 sides. The machine is operational, works in continuous mode. The input tray picks up and advances the item into the sealing chamber. It seals the film, cuts it off, removes excess film with the use of a side system for collecting waste. Then the internal feeder moves the item into the heating tunnel to shrink the film. Machine Parameters: - FAI PACK CS9700 packaging machine - FAI PACK FR30FT heating tunnel - Dimensions of packed items - knife length (930mm) package up to 650mm - width up to 500 mm - height up to 250-280 mm - Year of manufacture 2000

The machine is especially suitable for cutting beets, carrots, potatoes, peppers and other fruits and vegetables. This cutter enables the cutting of fruits and vegetables into dice and strips and the form of the cut pieces can be chosen by using different cutting tools. The desired dimensions of the dices and strips can be chosen by applying the required cutting tool. The device comes with a set of tools that ensures the cutting of fruits and vegetables to standard sizes. If the customer requires larger or smaller cut pieces then the standard ones, additional tool sets are supplied as an accessory. The cutting material is delivered manually to the infeed hopper, and cut pieces are discharged through an output funnel into a receiving bin. This output funnel is placed 380 mm above the floor level. The cutter is set on cluster wheels and therefor easy to move around the ...

ABL brand machine, model GTF WM. The watermelon line WML5 can be used to process watermelons. With the WML5 line, the watermelons are placed manually on a loading station that advances to the cutting station. The selected watermelons are pushed to a system that cuts the fruit into large slices (thickness to be determined). They are then picked up manually one by one by an operator and positioned on special shuttles. During transport inside the machine, the slices are selected according to their diameter by a special system. Determined by the size, a pick & place device removes them by placing them on the corresponding cutting unit and the diameter of the story producing cubes. The cubes and external waste are transported and separated on two underlying belts for further processing. The machine allows loading (manual and continuous) at a capacity of 4 - 5 fruits per minute. The machine c ...

Used Syrup Room up to 6000 L h Introduction to the Used Syrup Room up to 6000 L h Initially the Used Syrup Room up to 6000 L h emerges as a pivotal asset in liquid processing Since its inception in 2006 this powerful machinery has led the forefront of syrup production Boasting a notable capacity of 6000 liters per hour it serves as an epitome of high efficiency operation Currently it rests in storage eagerly awaiting integration into its next productive chapter Core Machinery Components Central to the syrup room s functionality the electrical control cabinet stands out This crucial unit guarantees precise automation of the entire syrup making process Subsequently the journey begins with a modest 200 liter sugar receive tank Following closely an 8000 liter sugar dissolving tank plays an indispensable role ensuring each batch meets the highest quality standards Filtration and Cooling Moreo ...

Used loose curd line from OBRAM. New 2015. Line composition: - Plate whey cooler, - Whey tank, - Tubular thick curd coater, - Whey belt separator, - Paripac weigher/dosing machine. The machine is designed for dosing a specific quantity of product into the packaging machine. - Paripac bag packaging machine. Bagger designed for packing loose quark into bags. Packing weight 250/500 g.

A prototype machine for cutting, dressing and cooling fruit, e.g. apples, pears. For example, apples and pears are cut into 8 or 12 segments with manual guillotines (2 pieces). The fruit falls into the bathtub, EQUIPPED with a glycol cooling system (coil installed), the belt speed can be changed, and 2 guillotines can work in the bathtub at the same time. Capacity up to 900kg/h, speed regulation. Built-in coil - Possibility to connect a cooling agent. Built-in circulation pump. The cut fruit falls onto a conveyor belt, which transports the cut fruit to the washing and cooling water, where it is removed from the liquid on a second belt. Minimum soaking time 3 minutes. Additionally, a temperature controller (Danfos programmer) is installed. Year of production 2015. 100% efficient with a VERY EFFICIENT cooling system. The guillotines are German devices manufactured by FEU ...

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

used for filling sliced and blanched mushrooms,, consisting of:, MURZAN - pump, type MUS-10, drip tape, LEONHARDT - filling machine, type AG1 DPE 150, year 1997, with a filling station, FURUKAWA, Old - Rivers - Pre-made Bag Packing Line, Ty FVV-8-275E, takes pre-made bags from a magazine, opens them, is filled via the Leonhardt,, a slight vacuum is drawn and the pouch sealed., Functionality:, The product is pumped with the Murzan pump from a storage tank onto a drip belt., The water is fed back into the tub via hoses because it is needed for pumping., The drip belt is designed in such a way that up to 4 employees can stand on the right and left, for example to be able to carry out sorting work., The product then falls into the funnel of the Leonhardt filler. Here there is another possibility to let the residual water run off before dosing., The product is conveyed forwards via the integr ...

Automatic tray sealing machine, make Sealpack, type 5V/G, year 2015, Plant for sealing sealable trays with a on the tray, coordinated top film, Set up on an octagonal A-PET tray, for 125 and 175 g content (134 x 100 x 23/40mm) with an oval base and octagonal lid., without filler and without labeller, • Can be operated from both sides, standard operating side here from the right!, • including vacuum and gas equipment, • including vacuum sensor, real value display in mbar, • including MAPpIus gas supply system (first-class from 200 mbar vacuum, Gas values in the pack, product dependent), Machine made of corrosion-resistant materials such as VA and plastic,, very stable column construction, integrated VA control cabinet splash water, protected, swiveling control panel All-round operability, Menu navigation can be stored over several programs, All switching, driving and sealing funct ...

Used vertical packaging machine made by Velteko model HSV 101S1. New 2002. The machine is equipped with auger dispenser and a date dispenser + receiving conveyor + PRISMA 08D3 checkweigher. TECHNICAL PARAMETERS: The HSV 101S machine is designed for packing loose and small goods into bags, which the machine forms from a roll of packing material. The machine is designed for normal working environment protected from the influence of atmospheric agents with temperature regulation (-5 to +40°C) -AB5, AC1, AD1, AE1, BA4, BOI, BE1, CA1, CD1 - according to HD CENELEC 384.3 S 1 The parts of the machine coming into contact with foodstuffs are made of stainless steel (17 240 Cr-Ni) suitable for contact with foodstuffs. The capacity of the machine depends on the grade of packaging material, the goods being packed, and the capacity of the dispenser. - Performance of the machine (layered  ...

Polar Mohr stacking lift L-1000-W-6 => refurbished for ergonomic working at user-friendly working heights Specifications Tub size 1400 x 1000 mm Stroke max. 910 mm Load capacity max. 1000 kg The automatic lifting of the material to be cut makes it possible to the operator at an ergonomically favourable working height for him the material into the vibrator or directly into the cutting machine shop. However, the stacking lift can also be used for stacking material to be sliced. The lowering takes place semi-automatic. This means that the process will be manually started and passed through the light barrier automatically stopped. POLAR stacking lifts do not have to be can be anchored to the ground and can therefore be easily be converted. Customer: - The productivity of the cutting machine increases by up to 10%, as the working height during loading/unloading rem ...

Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body  ...

General SKULW002 LocationNetherlands MakeAPI Heat Transfer TypeSCHMIDT SIGMASTAR - Eindampfanlage No.2016-0307-1-B Year of construction2016 Main Features MaterialStainless steel Motor18 KW Specified Features - Film evaporator Film evaporatorcheck Capacity2.725 kg/h MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Information With switchgearcheck (as is) Floorspace8,5x5 m Total height5 m Extra SpecificationsThe specified Schmidt SIGMASTAR evaporation system with an evaporation capacity of 2.725 kg/h is designed for the concentration of adhesive water from an initial concentration of 8% TS to a final concentration of 36% TS. The system is designed as a multi-stage evaporator. The product is pumped from the buffer tank into the sump of the plate evaporator of the first stage. The product rises in the spaces between the plates and is concentrated in the process ...

Used blow molding Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution boasting advanced features and capabilities Over time blow molding machines have become indispensable in modern manufacturing Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover the blow molding machine stands out for its exceptional performance and durability With a modest operational lifespan of 45 000 hours it has proven to be a reliable workhorse in the production line Its robust construction and precise engineering ensure consistent quality and productivity making it a valuable asset for manufacturing operations Comprehensive Maintenance Support In addition maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines Sidel a leading manufacturer in the industry offers comprehensive sup ...

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the ...

Description: Application: The MTM FKA system has been specially developed for small and medium-sized industries for partial cleaning. Design: The cleaning steps washing, rinsing, drying take place in one cleaning chamber. For serial parts, complicated single workpieces on product carriers as well as bulk material in commercial baskets, a multi-stage spraying and dipping process as well as a combined cleaning process with subsequent drying in an air circulation process can be realized in the cleaning system. Here, the cleaning effect, as well as the drying, is supported by rotating or swiveling the fabric basket within the degreasing system. Possible process technologies: - Cleaning - Degreasing - Phosphating - Steam cleaning - Flood injection washing - Spray rinsing - DI water rinsing - Hot air drying and vacuum drying. Process: The wash ware is fed to the cleaning system at the front ...

ELUMATEC SA 142/35 automatic circular sawing machine was built in 2001 in Germany. This extremely powerful machine is used for the precise and fully automatic cutting of aluminium and PVC joinery. The workpieces are fed into the workspace on roller conveyors with a option of single, double or triple feeding by means of a special switch. Material infeed is also supported by clamping cylinders, which ensures that the process runs safely and without any interruptions. The material is then cut into the large work space by a reliable circular saw with the option to freely adjust the cutting angle from 90° to 45°. The ELUMATEC aluminium profile sawing machine has so far only been used for cutting aluminium profiles. The total weight of the machine is 770 kg. Technical specifications of the ELUMATEC SA 142/35 aluminium sawing machine - cutting angle: 90° to 45° - maximum cutting uni ...

Used Isobaric Bottling Line DMC year 2021 This ensures efficiency and safety with its advanced design DMC SRL manufactured this bottling line in 2021 offering an operating speed of 550 bottles per hour bph It serves medium to high level production lines The machine complies with all current safety regulations and includes safety protections Manuals are available to facilitate easy adaptation to various production needs Monoblock Features The monoblock of the line includes a rinser filler and capper These components integrate to optimize space and improve operational efficiency The rinser features 8 clamps and performs one treatment to clean the glass bottles before filling This initial process maintains high hygienic standards Filler Details of the Isobaric Bottling line DMC The filler of the Used Isobaric Bottling Line DMC year 2021 uses a system of mobile nozzles with 6 electronic fill ...

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Mobile dust extraction Brand: Riedex Type: DM 200 New machine Technical data: - Engine power 4 kW - Nominal volume flow 2262 m³/h - max. volume flow 3200 m³/h - 14,1 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content

Description: Please download the PDF with all the information about the company and the industrial equipment for sale , Plant OF A RECYCLED POLYMERS – CRUM RUBBER GRANULES The installed technology employs the cryogenic process. This technology is rare in Europe on an industrial scale Provides superior cryogenic rubber granules for both raw material and end product applications. Cryogenic granules have as their main applications: Infill for football pitches and golf courses in synthetic turf, Ecological road pavements of high resistance and durability (crumb rubber modified bitumen), Shock-absorbing and anti-compacting floors for horse riding rings and arenas, Raw material for the polymer manufacturing industry (rubber and plastic). This factory is currently the most notorious European producer offering cryogenic rubber granules. Exported is production to countries r ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Cone diameter: 2,100 mm!, feeding size: 0-140 mm, gap: 10-60 mm, capacity: approx. 600 t/h (0-20 mm), up to 800 t/h, E-motor 250 kW, many spare parts, completely with basic frame, approx. 100 t.; hydraulic unit in extra 20ft container currently dismantled into parts, but ready for transport

Conversion control for exenter presses , Press Safety Control Replaces old Preventa controllers ( OTR SEZ ZBS ) Control New manufactured on customer request, for a 63 to Weingarten, Control designed for drive 6 KW .od. Schuler / Weingarten / Heilbronn / Ruhrmann / Helmerding Ready to connect . Checked. Motor Connect, Two-hand console Connect, FootSwitch Connect, Emergency Off Circle and Safety Valve Connect. Press into operation . Advice on conversion, UVV acceptance. Additional variants possible. email info@pradler Recognized maintenance technician Pradler Machine Service email info@pradler Tel: 05242/43186

Centre height 135 mm Top width 630 mm The bed diameter 315 mm Permissible diameter into the spindle bore 40 mm 45 Speed 3000 rpm Feed 0.015 0.35 m / h Inner taper spindle / tailstock MK 5 / MK 3 Weight 1150 kg

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.