We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,158 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Memory: 128MB, including controls.
used
Number of axis: 6, nominal load: 90kg, controls: Engel, weight: 1.13t.
used
Load: 6kg, weight: 112kg, with Controls Stäubli CS7 RX90, weight: 345kg, including documentation and pneumatic dual gripper.
used
Max. load: 240kg, weight: 1.267t, with controls, was maintained regularly, an inspection is possible.
used
Weight: 1.12t, operational hours counter: 15,840h, with controls, the robot ran in two-shift operation, a second control system in mint condition is still available.
used
The robot is unused and still in its original packaging.
used
Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.
used
Horizontal hydraulic press with automatic vertical tying, exit tunnel: 800 x 700. Inlet: 1.05 x 720, engine: 15 hp, with electrical panel.
used
- Software updated: 3.15.8 - Hours: 1280 - Working radius: 850 mm - Payload: 5kg Condition: very good, hardly any wear due to the low loads. Mainly used for measuring sensors in the laboratory. Circumference: - Robot with control panel and control - Folder with user manual - mobile, solid table
used
Horizontal hydraulic baling press with manual tying. Engine: 40 hp, bullet size: 1000x900 mm, bullet weight: 600 Kg.
used
The opportunity! As good as new pre-press flap press with cross binding Hydraulic master cylinder resealed! With security key system! Fully functional, every service performed, still in operation, without a conveyor belt! Viewing possible at short notice by appointment! Subject to prior sale! Purchase including dismantling and loading
used
Used IRB140-6/0.8 Year: 2009 Reach in mm-810 mm Payload-6 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included, can be provided up on request. Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.
used
Model: KR150 L130 Condition: USED Year: 2003 Reach in mm-2900 mm Payload-130 kg Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.
used
The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Condition: USED Reach in mm-1610 mm Payload-60 kg Year: 2008 (2005 option is available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.
used
The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16-2 (KR16-2 Foundry option is also available) Condition: USED Reach in mm-1610 mm Payload-60 kg Year: 2015 (2014 option is available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.
used
Model: KR150 L130 Condition: USED Reach in mm-3500 mm Payload-110 kg Year: 2004 (Multiple options available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Not Included: Shipment, Customs and VAT is not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.
used
Model: KR2-210 Condition: USED Reach in mm-2700 mm Payload-210 kg Year: 2000 Included: Manipulator only NOT included: Externals attached to the manipulator + KRC2 Control Cabinet + Wire Sets + Teach Pendant (We can try to find it for you with an additional price) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs.
used
Model: KR210 2000 Payload: 210kg Manipulator: Year 2004 Controller Cabinet: KRC2 Year 2003 (We can find you a newer version) Included: Manipulator + KRC2 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. Please get in touch with us for the refurbishment options.
used
Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used and tested Year: 2004 (Multiple Options Available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.
used
Model: KR210 (L150)-2 2000 Payload: 210kg or 150kg Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.
used
Model: KR360 (L280) Payload: 280kg or 360kg Arm Reach: 3076 mm or 2826 mm Condition: Refurbished with 1 year of warranty Manipulator: Year 2004 Controller Cabinet: KRC2 ed05 Year 2007 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + 1 year warranty As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.
used
Model: KR150-2 2000 (Foundry Option is also available) Condition: USED Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant (Gripper & The base are not included) - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.
used
Suitable with: KRC2 KR210 series and KR150 series Length: 40 cm (makes KR210 a KR210 L150) Condition: Refurbished and repainted to KUKA's orange
KRC2 360-500 ROBOT ARM EXTENDER The price is for 1 piece of ROBOT EXTENDER Code: KRC2 360-500 ROBOT EXTENDER Length: 25 cm & 50 cm Brand: KUKA Condition: USED
used
COMMERCY SOUDURE CY 386 MPRA Status: USED WELDING MACHINE Year: 2004 (Multiple Options Available) Shipping: NOT included in the price Gqymba8p Payment: 100% payment before collection PLEASE CONTACT US FOR FURTHER INFORMATION
used
Robot ABB Robotics IRB 140 S4C+M2000 Control: S4C+ M2000 Number of axles: 6 Max. load capacity: 6 kg Max. working area: 810 mm Year of construction: 2006 Scope of delivery : robot, controller, cables, teachpanel, circuit diagrams The stated net amount is exclusive of the statutory VAT of 19%.
used
Robot KUKA KR 180 Series 2000 with 3m process axis max. weight: 180 kg Max. Reach: 2700mm Max. payload: 180kg Dimensions: 2700mm Number of axles: 7 Year of construction: 2001 Scope of delivery: robot, controller, cable, teachpanel, circuit diagram
used
Robot Yaskawa Motoman YR-SV3-J30 Control: XRC Year of construction: 2001 Load capacity: 3 kg Reach: 677 mm Scope of delivery : robot, controller, cable, teachpanel, instruction manual, wiring diagrams The stated net amount is exclusive of the statutory 19% VAT.
used
• Globe valve, flow started, flanged to stem and Salient Flyer, ANSI 150, DN200, PN 14 Bar, Stainless Steel Body steel – never used – year 2021; • DIN 2353 tees, type Q-25 steel and miscellaneous taps and fittings – 2007; •Flanged non-return and butterfly valves of various diameters DN 100, DN150, DN200, PN 10 – used and unused; • welded stainless steel funnels; • steel pipes welded and clamped but not Used in steel – weight 1 ton aprox.
used
Robot KUKA KR30L15/2 - Control KRC2 This used robot (built in 1998) from KUKA is perfect for metalworking and locksmithing. With a load capacity of 15 kg and a reach of approx. 3100 mm, it offers a high degree of flexibility and precision. The KRC2 controller allows for easy programming and operation. The robot is in very good condition and comes with a warranty. Ideal for companies that want to automate their production processes. The stated net price is exclusive of the statutory 19% VAT.
used
ABB Robotics IRB 1400 robot complete Control: S4C-M98 Max. working radius: approx. 1450 mm Load capacity: 5 kg Year of construction: 1998 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams 2 weeks start-up warranty. No further warranty in addition, spare parts are always available from stock. The robot is fully functional and can be visited. Free loading - ex works The stated net price is exclusive of the statutory 19% VAT.
used
KUKA KR 60L30/2 Robot Robot Mechanics Only Year of construction 2003 Load capacity 30kg Reach approx.:2429mm 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. Free loaded/ex-works. The indicated retail price is exclusive of the statutory VAT of 19%.
used
ABB Robotics Robot IRB 2400/16 S4C M98 Control: S4C M98 Number of axles: 6 Max. load capacity: 16 kg Max. working area: 1550 mm Year of construction: 2000 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.
used
Coffee roaster (new, never used before) Capacity: 7kg/batch, 42KG/Hour Voltage: AC 220V 50-60HZ single phase Roast Time: 12-15min/batch Dimension: 15119651638mm Drum motor: 200w Exhaust fan: 200w Cooling mixing: 100w Cooling tray fan: 370w Electric heating power: 12000w Gas heating consumption: 0.5kg/h Heating type: Electric Color: black/silver ADDKA superior motor 310SUS double wall drum Artisan roasting data logging [Bluetooth connect computer]. OBS: Machine never used before, new product and work perfect. Manufacturer in 2023. Product with CE certification and ISO 9001. ACCEPT OFFER.
used
Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,300 mm, weight approx.: 150 kg
used
Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,100 mm, weight approx.: 40 kg
used
Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,300 mm, weight approx.: 150 kg
used
Approx. Onsite Dimension. (l x w x h): 240 x 180 x 120 mm, weight approx.: 5 kg
used
We offer one second hand sewing machine for the manufacture of industial sacks, type 1014/1, Icoma, Germany, Tube width 20-80 cm, Tube length 55-150 cm, with cutter, sewing head from Union Special, machine ready for test production, one spare sewing head could be given with the machine
used
Description: serial no.: 013766 operating voltage: 220 – 240 V frequency: 50/60 Hz , connected load: 850 W Approx. Onsite Dimension. (l x w x h): 400 x 300 x 1,200 mm, weight approx.: 10 kg
used
Description: Article number: 0701 138 X Rated power: 1200 W Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 20 kg
used
type: KR 125L100/2 serial number: 774459 Year: 1988 weight: 975 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,400 mm, weight approx.: 100 kg
used
Description: - Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,000 mm, weight approx.: 30 kg
used
Description: Serial number: 432147BR1201 Operating voltage: 220 - 240 V Connection: 2200 W Frequency: 50/60 Hz Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,200 mm, weight approx.: 100 kg
used
Description: Machine number: 0305741 Operating voltage: 220 V Connection: 700 W Approx. Onsite Dimension. (l x w x h): 700 x 450 x 750 mm, weight approx.: 30 kg
used
Manufacturer : Natel Model: NM25 Type: Accumulation table Year: 2020 Automatic unit counter. Table size: 80 x 110 cm Conveyor width: 20 cm Video in operation: https://www.youtube.com/watch?v=cZdCP2Gy0hI This equipment can be part of a : Pester Pewo-pack 200 SN-K - Shrinkwrapper -> https://www.osertech.eu/en/product/pester-pewo-pack-200-sn-k-shrinkwra pper/ Domino / Keyence / Cermac - Inkjet printing with detection -> https://www.osertech.eu/en/product/domino-keyence-cermac-inkjet-printi ng-with-detection/
used
Manufacturer : L?dige Model: FKM 1200D 2H Type: ploughshare mixer Year : 1966 Motor power: 15kW Materials in contact with product: stainless steel Total volume: 1200 L Plugs for choppers (not installed): 2 Transmission: geared motor
used
Manufacturer : Moritz Type : Stirrer / mixer Motor: CEM Power : 2,2 kW Speed: 1420 rpm Stator head diameter: ? 250 mm Total agitator shaft length: 750 mm
used
Manufacturer: domino - Model: G series - Type: inkjet printing Manufacturer: Cermac - Type: conveyor Camera: Keyence - Type: detection camera Ejection: compressed air Motor power : 0,12 kW Conveyor width: 200 mm Video in operation: https://www.youtube.com/watch?v=cZdCP2Gy0hI This equipment can be part of a set : Pester Pewo-pack 200 SN-K - Shrinkwrapper -> https://www.osertech.eu/en/product/pester-pewo-pack-200-sn-k-shrinkwra pper/ Natel NM25 - Accumulation table -> https://www.osertech.eu/en/product/natel-nm25-accumulation-table/