We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,472 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Equipped with portable hydraulic power unit and pedal actuation, the opening of the bracket goes in approximately 53 cm (measured from the center of the punching tool to the end of the bracket opening)
used
set up above ground Plate feed roller roller with feed roller conveyor Brand: Winter Type: 9.38.002.000 Serial Number: 16.538 including run-out conveyor belt
used
2/3rds underground with soundproofing cabin Speed: 30-80 beats per minute Plate feeder unit Brand: "Winter" Type: 938002010 Serial Number: 17845 Year of construction: 1997 Chip evacuation Brand: "Gössling" Serial Number: 215 7037 931
used
Capacity: 60 t Folding length: 2550 mm CNC Brand: Cybelec CNC Model: DNC 80 Make Beyeler PR6 Type PR6 2550 x 60 T Year 1998 Cybelec DNC 80 Capacity (metric tons) L = 2.550 Folding length (mm) Force = 60 T Down stroke or Up strokeStroke = 165 Tandem type Speed = 200/10/110 Weight = 6000 Kg Power 5.5 kW / 400 V
used
Capacity: 60 t Folding length: 2550 mm CNC Brand: Cybelec CNC Model: DNC Make Beyeler 60 T Type EURO 4 Year 1993 Cybelec DNC Capacity (metric tons) Force = 60 T Folding length (mm) Length = 2.550 Down stroke or Up stroke Stroke = 165 Tandem type Die height = 360 Troath = 255 Speed 85 / 7 / 85 mm/Sec
used
Above ground with sound-absorbing cab Speed: 50 - 90 strokes per minute including spout with additional sound attenuation
used
Capacity: 40 t Folding length: 2050 mm CNC Brand: Safan CNC Model: TS1 Make Safan SMK 40 T Type SMK 40 - 2050 Year 1998 TS1 - CNC Capacity (metric tons)Force = 40 T Folding length (mm)Length = 2.050 Down stroke or Up strokeStroke = 115 Tandem type SICK Safety Power 9 kW1 set WILA EQUIDOR tools
used
Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050
used
Equipped with adjustable platform in different heights; unused in box
used
used
2/3rds underground with soundproofing cabin Speed: 65 beats per minute in 150 mm increments Plate feeder unit Brand: "Winter" Type: 938002008 Serial Number: 17366 Year of construction: 1997 Chip evacuation Brand: "Gössling" Serial Number: 215 8651 961
used
Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W
used
Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: TASK 64 Make Schiavi 100 T Type SEB 30 100 Year 2001 TASK 64 Y1/ Y / X / R axis Capacity (metric tons) 100 Ton Folding length (mm) L = 3.100 Down stroke or Up stroke Stroke 150 Tandem type Die height = 3507.5 kW / 400 V100 / 10 / 100 mm/Min
used
Capacity: 250 t Folding length: 4100 mm CNC Brand: Cybelec CNC Model: Modeva 880 Make Deratech 250T Type TECHNICA Plus Year 03 - 2009 Cybelec Modeva 880 Capacity (metric tons)Force = 250 T Folding length (mm)Length = 4.100 Down stroke or Up stroke Power 18.5 kW Tandem typeY1 / Y2 / X / V Tool 10 / 16 / 22 / 35 Tool 50 / 60 / 85 Under power !
used
Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make Lucas VBU 4 Type VBU 400 trimming & bearding Year 12 . 2001 Siemens SIMATIC Max. swing = 500 mm Thickness = 5 mm Stroke cylinder = 350 mm 2 x Support ZHSA 2 x Sick safety guids
used
Capacity: 130 t Folding length: 3140 mm CNC Brand: Amada Make Amada HFT 13 Type HFT 1303 CNC Year 08 . 2002 Amada abkantpresse pressbrake kantbank hft Capacity (metric tons)Length = 3.140 Folding length (mm)B Column = 2.700 Down stroke or Up stroke Force = 130 Ton Tandem type Troath = 420 mm CNC CD 2000Y1 / Y2 / X / R Large tooling package
used
Capacity: 450 t Folding length: 4100 mm CNC Brand: Cybelec CNC Model: DNC 80 Make Beyeler 450 T Type RT 450 Year 1982 / 1996 Cybelec DNC 80 Beyeler abkantpresse Capacity (metric tons)Force = 450 T Folding length (mm)L = 4.100 mm Down stroke or Up stroke CNC Cybelec DNC 80 Tandem type 765 Stroke !1100 Dis table - ram Large tooling package
used
Capacity: 300 t Folding length: 3100 mm CNC Brand: Cybelec CNC Model: DNC 1200 Make Beyeler 300 T Type PR 6 Year 2000 Cybelec DNC 1200 Capacity (metric tons) T = 300 Folding length (mm) L = 3.100 Down stroke or Up stroke Y1/Y2/X/R/Z1/Z2 Tandem type Troath = 400 Hydr. tool clamping
used
Capacity: 630 t Folding length: 6200 mm CNC Brand: Cybelec CNC Model: Modeva 12 S Make SMD 630 Ton Type PBH 630 - 6200 Year 2011 Cybelec MODEVA 12S Capacity (metric tons) Force = 630 Ton Folding length (mm)L = 6.200 Down stroke or Up strokeB = 5.200 Tandem type Y1/Y2/X/X1/R/Z1/Z2/V Hydraulic top clampWeight 75.000 Kg New Euro 300.000
used
Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet
used
Capacity: 25 t Folding length: 1500 mm Make Safan 25 Ton Type UCK Year 70 er Conventionel pressbrake abkantpresse Capacity (metric tons)Force = 25 T Folding length (mm)L = 1.500 Down stroke or Up stroke Backgauge = 500 mm Tandem type Hydraulic opperated Table width 100 mm
used
Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling
used
pressure:2,5 t
used
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
used
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
used
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
used
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
used
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
used
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
used
bending cap: 10 mm steel on three meter length Capacity: 140 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 180 mm Max distance between table -- ram: 400 mm Table width: 160 mm Locking speed: 60 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 15 HP Weight: 14 ton
used
3 axes: Y1 / Y2 / X Capacity: 80 ton x 2500 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2050 mm Max stroke: 120 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 9 mm/sec Returning speed: 108 mm/sec Electric motor (power): 10,5 kW Power needed: 220V Weight: 4,4 ton
used
Type: P502A Capacity: 50 ton x 2100 mm Passage between uprights: 1600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 80 mm Locking speed: 40 mm/sec Working speed: 7,5 mm/sec Returning speed: 47 mm/sec Electric motor (power): 5 HP Length: 2070 mm Depth: 1180 mm Height: 2040 mm Weight: 3 ton
used
Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm) ...
used
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
used
Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton
used
Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton
used
Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton
used
SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation
used
Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher.
used
Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible.
used
Oil capacity: 170l.
used
Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation.
used
Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation.
used
Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.
used
Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin.
used
Max. hydraulic pressure: 400bar.
used
Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an on-site inspection is possible.
used
Pressing force: 300t, there are also straightening machines and coilers available, with documentation, worked until the end, an on-site inspection is possible.
used
Distance between the columns: 1100/400mm, max. ram stroke: 2x 1800mm, plunger diameter: 275/150mm, length: 2650mm, width: 2400mm, height: 4850mm, weight: 18t, has received UVV, the press control is defective.
used
Connected load: 4kW, weight: 2t, an inspection is possible.