hobbing used for sale

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear Hobber WMW MODUL ZFWZ 1500 x 15

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

max. work piece diameter, mm 2000 max.work piece length, mm 500 table diameter, mm 1800 max. work piece weight, kg 10000 module 20 max. diameter of installed worm mills, mm 300 max. length of installed worm mills, mm 500 main motor power, kW 14 machine weight, kg app. 32000

For sale is the following machine: Second-hand machine Type Koepfer 173 SPS Built in 1989, completely revised in 2022 The machine is equipped with Klöckner Moeller PLC control. Machine color is green, RAL6011. Speed adjustment of the cutter is carried out with inverter and speed indicator. The number of teeth of the workpiece and differential is adjusted by means of interchangeable wheels. The machine is equipped with a shift milling head with automatic shifting. 2. Technical data max. module 2.5 max. workpiece diameter, manual loading 156 mm max. workpiece diameter, automatic loading 100 mm max. toothing length 150 mm max. workpiece length, for manual loading 360 mm max. workpiece length, for automatic loading 260 mm max. cutter diameter 63 mm max. cutter length 70 mm max. cutter displacement (shifting) 70 mm Partial gearbox 4:45 Cutter speed max. 1,100 -1 ...

Diameter capacity: 2000 mm; Maximum module: 20 mm; Max. work piece weight, kg 10000 Width of the gear: 560 mm; Spindle speed range, rpm 8...125 Main motor power: 15 kW Dimensions: mm 6910x2990x3460 Weight: 31 800 kg

Inv. Num. : 6635 Type: 16 GLS 25-90 Producer: Coburg Created: 1985 Parameters: Max. speed: 285-1700 1/min Maximum distance between tailstock tips: 4120 mm Max. thread diameter: 14-90 mm Equipment: Replacement clamping bushings Circular knife sets

Module 6.00 mm Cylindrical / profile grinding module 14.00 / 8.00 mm Workpiece diameter 380 mm Axial travel 1,000 / 600 mm Shift travel 320 mm Hob speed 12,000 min-1 Tool diameter 170 / 320 mm Tool length 230 mm

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max diam 340 , max modul 8

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

Gear hobber sharpener Kapp AS 305 B

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and  ...

Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , witho ...

Description: Workpiece weight (max.): 2,000 kg Wire length: 5,000 mm Power: 20 kW (27.19 HP) X-axis travel: 320 mm Y-axis travel: 100 mm Z-axis travel: 5,000 mm Feed X-axis: 6,000 mm/min Feed Y-axis: 3,000 mm/min Feed Z-axis: 6,000 mm/min Centre height: 420 mm Spindle speed (max.): 3,150 rpm Cost of retrofit over the past 4 years: Main motor C-axis replaced for a reconditioned motor. Cost approx. 16K Lubrication of the main spindle completely replaced, new pipes and seals, which has also greatly improved tool attraction in the spindle nose. Cost approx 11K Main spindle completely overhauled. Cost approx 37K total power requirement: 20 kW, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 2,000 x 2,500 mm

MAX DIAM 230 mm , MAX LENGHT 250

MAX DIAM 320 , MAX MODUL 8

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Machine : Gear hobs 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 m 3.75 M 2 M 4 M 2.25 m 4.5 M 2.5 M 5 M 2.75 m 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30°, φ 85x130, 90% M 1,5875, 30, φ 82x120, 90%

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 Modul min. module: 1 Control: Siemens 840 D PowerLine table diameter: 1200 mm table load: 15 t total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5 x 4 x 3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjust ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 t total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5x4x3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program Milling in single-part process - Sw ...

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mm milling width: 260 mm max. module: 10 min. module: 12 total power requirement: 8 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 � ...

Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm

HOBBING MACHINE - LIEBHERR S 800 /Lorenz workpiece with counter holder 600mm workpiece with retracted holder 800mm distance of the milling carriage 360mm Largest millable pitch b. largest workpiece 5Pi in the normal power range 8 Pi Receiving cone - milling spindle MK 5 Milling mandrel 22/27/32/40mm milling cutter diameter 186mm cutter length 170mm milling cutter displacement 80mm Milling cutter speeds 40-220 rpm Feeds infinitely variable/vertical Feeds infinitely variable/horizontal Feeds infinitely variable / tangential Clamping table without water rim 550mm Clamping table bore 100mm Mandrel cone MK5 Mandrel 36mm COMPLETE TECHNICAL DATA CAN BE SENT BY E-MAIL BE SENT. ACCESSORIES SEE PICTURES. 1xpallet interchangeable wheels 1xPalette hobs 1xpallet clamping/mandrel Documentation Machine feet Chbaacmi7q Dimensions: LxWxH 3.6x1.8x1.9 meters Weight a ...

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.