hobbing machine used for sale

Module 6.00 mm Cylindrical / profile grinding module 14.00 / 8.00 mm Workpiece diameter 380 mm Axial travel 1,000 / 600 mm Shift travel 320 mm Hob speed 12,000 min-1 Tool diameter 170 / 320 mm Tool length 230 mm

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

For sale is the following machine: Second-hand machine Type Koepfer 173 SPS Built in 1989, completely revised in 2022 The machine is equipped with Klöckner Moeller PLC control. Machine color is green, RAL6011. Speed adjustment of the cutter is carried out with inverter and speed indicator. The number of teeth of the workpiece and differential is adjusted by means of interchangeable wheels. The machine is equipped with a shift milling head with automatic shifting. 2. Technical data max. module 2.5 max. workpiece diameter, manual loading 156 mm max. workpiece diameter, automatic loading 100 mm max. toothing length 150 mm max. workpiece length, for manual loading 360 mm max. workpiece length, for automatic loading 260 mm max. cutter diameter 63 mm max. cutter length 70 mm max. cutter displacement (shifting) 70 mm Partial gearbox 4:45 Cutter speed max. 1,100 -1 ...

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

max diam 340 , max modul 8

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

Gear hobber sharpener Kapp AS 305 B

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Machine : Gear hobs 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 m 3.75 M 2 M 4 M 2.25 m 4.5 M 2.5 M 5 M 2.75 m 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30°, φ 85x130, 90% M 1,5875, 30, φ 82x120, 90%

Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and  ...

Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , witho ...

Description: Workpiece weight (max.): 2,000 kg Wire length: 5,000 mm Power: 20 kW (27.19 HP) X-axis travel: 320 mm Y-axis travel: 100 mm Z-axis travel: 5,000 mm Feed X-axis: 6,000 mm/min Feed Y-axis: 3,000 mm/min Feed Z-axis: 6,000 mm/min Centre height: 420 mm Spindle speed (max.): 3,150 rpm Cost of retrofit over the past 4 years: Main motor C-axis replaced for a reconditioned motor. Cost approx. 16K Lubrication of the main spindle completely replaced, new pipes and seals, which has also greatly improved tool attraction in the spindle nose. Cost approx 11K Main spindle completely overhauled. Cost approx 37K total power requirement: 20 kW, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 2,000 x 2,500 mm

MAX DIAM 230 mm , MAX LENGHT 250

MAX DIAM 320 , MAX MODUL 8

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

press capacity: 10.000 kN; ready for operation

Press capacity: 10.000 kN Height: 480 mm Stroke: 350 mm Working height: 1,090 mm

For sale a milling head without counter bearing

For sale a used milling head of a Gleason Genesis 130 H

Surface reference plates, roughness dimensions MASSI hobbing TGL 4763 Rz 6.3 μm and Rz 20 μm in wooden box Dimensions: 240 x 120 x 30 mm

Surface reference plates, roughness dimensions MASSI hobbing TGL 0-4763, DIN4763 Rz 6.3 μm - Rz 20 μm in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI hobbing TGL 4763 Rz 6.3 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Key data: 1250 t

For sale is a sinking press Sack + Kiesselbach pressure 1250 tons.

Description: Gear hobbing cutter, Module 15 R1 EA 126 DIN 3968 A DIN 3972 II E-W. 20 ° c. 4 ° 21` HSS-E Frst. 33.75 Approx. Onsite Dimension. (l x w x h): 230 x 230 x 210 mm, weight approx.: 40 kg

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2 with fine adjustment; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 1500kg;

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Working width: 380 mm; Working height: 200 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 220mm, vario-drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.