heavy fuel used for sale

Platform trucks, transport trucks, heavy duty trucks, table trucks, assembly trucks, industrial trailers -Handover: in current condition as viewed -Platform: uneven, see photos -Load capacity: 1.5 t -Industrial trailer with 1-axle turntable steering, braked -Platform: 3800/1400/H790 mm, dimensions see technical photo. drawing -Tires: pneumatic wheels 23-5 -Transport dimensions: 4100/1400/H1650 mm -Weight: 800kg

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

Gate Precision lathe G-1120-HD x 3000 Y.O.M. 2013 Almost not used! New price with this options € 150.000,- euro. . Spindle bore 255 mm! Two chucks 630mm. Now available, price €35.000,- ex VAT. See photo's, under power too check.

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SOCO RA2029 Technical data: Conveyor length (NL): 2010 mm Framework width (NB): 670 mm belt width (GuB): 580 mm height (BH): 110 mm support feet: optionally available Conveying speed (v m/s): 0,33 Drive: gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2010 Nominal / outside width in mm: 670 Belt width in mm: 580 Driven: YES Engine type: Nerimotori KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,333 scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of ...

Dematic Heavy duty Belt Conveyor GF 1520-760-650 RA2027 Technical data: Conveyor length (NL): 1520 mm Framework width (NB): 760 mm, 1110 mm with motor and movi mot belt width (GuB): 650 mm height (BH): 140 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1520 Nominal / outside width in mm: 760, 1110 Belt width in mm: 650 Driven: YES Engine type: SEW Movi-Mot KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,025 - 0,883 scope of delivery: without supports and side guides, includ ...

SOCO RA2028 Technical data: Conveyor length (NL): 1470 mm Framework width (NB): 670 mm belt width (GuB): 580 mm height (BH): 110 mm support feet: optionally available Conveying speed (v m/s): 0,33 Drive: gear motor Electrical data: 50Hz V380-500, kW 0.12 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1470 Nominal / outside width in mm: 670 Belt width in mm: 580 Driven: YES KW: 0,12 Conveyor speed m / s: freely adjustable, 0,333 scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look for ...

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 150 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12960 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 150 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Quantity: 4 pieces of heavy-duty transport trolleys available -Price: piece -Total dimensions: 12,300/3000/H1100 mm -Weight: 12960 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 6000/2500/H700 mm -Load capacity: 40 tons -Steering: double -Drawbar length: 1180 mm -Drawbar eye: Ø 40 mm -Wheels number: 16 pieces -Wheel Size: 425/150-305 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 7140/2500/H700 mm -Weight: 3560kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 6000/2500/H600 mm -Load capacity: 40 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 16 pieces -Wheel Size: 425/150-305 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 7160/2500/H600 mm -Weight: 3600kg

Schwerlaststapler - Heavy duty forklift Svetruck 161238 Year 1995 - Serial-No. 5092172 Betriebsstunden 19.000Std. / Working hours 19.000h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Platform trucks, transport trucks, heavy duty trucks, table trucks, assembly trucks, industrial trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Steering: 1-axis turntable steering -Platform: 5980/2500/H790 mm -Load load: max. 17000 kg -Tires: solid rubber 405/130-305 Z -Wheels number: 16 pieces -Drawbar length: 2000 mm -Swivel ring: Ø 1100 x 90 mm -Total dimensions: 6700/2530/H790 mm -Town weight: 3600 kg

Platform trucks, transport trucks, heavy duty trucks, table trucks, assembly trucks, industrial trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Steering: 1-axis turntable steering -Platform: 7605/2605/H825 mm -Load load: max. 15000 kg -Tires: solid rubber 405/130-305 Z -Wheels number: 16 pieces -Drawbar length: 2000 mm -Swivel ring: Ø 1100 x 90 mm -Total dimensions: 8000/2605/H825 mm -Town weight: 5640 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1100 mm -Weight: 12960 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Brakes: electric, can be put back into operation for an additional charge -Design: very low loading area with good stability -Platform: 2600/1600/H440 mm -Load capacity: 18 tons -Steering: double -Drawbar length: 1300 mm -Drawbar eye: Ø 50 mm -Wheels number: 8 pieces -Wheel Size: 550/160-410 STB MH20 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 5250/1600/H550 mm -Weight: 2200kg

Machine is fully functional and has its own cooling and a Heidenhain digital has a three-jaw chuck and a clamping width of 450mm is 3 meters long and 3 tons heavy you can clamp through the jaw chuck so longer workpieces are no problem it has a rotary heart and various cornel and jaws to exchange machine is in a very good condition and machine manuals are included

Wohlenberg PT3 2000 IV Heavy Type CNC Turning Lathe Ø1820 x 12000 x 45 Tons maximum machining values. You can find more details among the uploaded pictures. Height of centres over flat way : 1010 mm Swing over turning slide : 1640 mm Swing over bed : 2000 mm Workpiece weight between centers : Maximum 28000 KG

Waldrich 10 meter heavy duty lathe with chip conveyor Distance between centers : 10500 mm Max turning diameter: 1,006 mm Maximum clamping grip 1030 mm Working pressure weight: 25 ton Main Motor power: 25 kW

Point lathe SN 55 / 4000 in good technical condition, including lunette. Total machine input:: 7.5 kW Circulating diameter above the bed: 550 mm Revolving diameter above support: 310 mm Distance between spikes: 4000 mm Spindle drilling: 71 mm Spindle speed - range: 90-1000 Working feed - number of steps: 16 Working feed - range: 38 mm/min

Maximum turning length 5000 mm turning diameter above bed (max) 1000 mm turning diameter above support (max) 710 mm workpiece weight between centers (max) 10 t spindle power 37 kW lathe length 8605 mm lathe width 1920 mm lathe weight 15.2 t Currently disconnected.

Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350  Grip range 1 mm Ø 300 ÷ Ø 550  Grip range 2 mm Ø 500 ÷ Ø 950  Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150  Spindle rotation speed in 1st rpm range 1 ÷ 24  Spindle rotation speed in 2nd rpm range 20 ÷ 60  Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X� ...

90 m pallet rack Jungheinrich Heavy Duty New, very good condition, see pictures Height 5 m Depth 110 cm Beam length 3.7 m Load/compartment 3800 kg Load 18000 kg Frame blue Carrier white Year of construction 2023 Negotiation price: € 15.490,-- net from stock Offer consists of: + 25 pcs. frame pre-assembled, new, depth 110 cm, height 5 m + 144 pcs. carriers, used goods, length 3.7 m, 3800 kg ballast/compartment + 288 pcs. Suspension locks + 100 concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all price ...

Lever lock, heavy-duty type, for appliance doors DIRAK® lever: 232-0901, length: 180 mm tongue: 232-1001, length: 60 mm, width: 27 mm base plate: 232-1101, length: 60 mm, width: 60 mm locking hook: 232-1202 / 1203, Length: 70 mm, Width: 32 mm Material: Steel Surface: Galvanized used, tested ! dimensions ( lever lock ): 240 x 60 x 52 mm dimensions ( locking hook ): 70 x 32 x 35 mm

Platform trolley, transport trolley, heavy duty truck, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy duty trailer -Heavy-duty transport trolley: industrial trailer with 2-axle steering -Platform: 3200/1600/H490 mm -Load capacity: t -Tires: solid rubber 310/120-220 -Total dimensions: 5530/1600/H590 mm -Transport dimensions: 3620/1600/H590 mm -Weight: 540 kg

Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed castors -Equipment: Ball bearing, VULKOLLAN -Wheel dimensions: 200 x 80 mm -Load capacity: approx. 2500 kg -Mounting plate: 310 x 345 mm -Overall height: 345 mm -Number: 7x wheels available -Price: per piece -Dimensions: 410/310/H345 mm -Weight: 91 kg/each

Offer 21377 Technical data approx.: - 21 storage levels / compartments with inserts - 18 x compartment height approx. 100 mm - 3 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 3480 mm - Transport height folded 2600 mm

Offer 22459 Technical data approx.: - 13 storage levels / compartments with inserts - 11 x compartment height approx. 100 mm - 2 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 2350 mm

Hydraulics Heavy Duty Lifting Cylinder 1 pc. 50to, Euro 400,- 1 pc. 100to Euro 500,- Price per piece

length: 5000 mm payload: 18 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number 3317 Including 2 steady rests, tailstock, faceplate diameter 1000 mm Drehlänge: 9,500 mm, turning diameter over bed: 1,500 mm, turning diameter over slide: 1,100 mm, spindle bore: 90 mm, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 18,500 x 3,000 x 1,900 mm

Description: Including faceplate, diameter 1600 mm, tailstock and steady rest , Machine number 3907 Drehlänge: 6,500 mm, turning diameter over bed: 2,400 mm, turning diameter over slide: 2,000 mm, spindle bore: 80 mm, control: SIEMENS SINUMERIK, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 2,450 x 2,750 mm

Description: Contents consisting of clamping devices such as anchors, screws, clamping plates (dimensions: 780 x 580 mm), a clamping table (table dimensions: 800 x 600 mm with 5 grooves) Please note: the disk sander on the shelf is not included in the scope of delivery Dimensions of the shelves: 1200 x 610 mm Approx. Onsite Dimension. (l x w x h): 3,100 x 700 x 2,000 mm, weight approx.: 500 kg

Description: Dimensions of the support surface: 1700 x 600 mm Max. load: 6000 kg Approx. Onsite Dimension. (l x w x h): 3,500 x 650 x 1,900 mm, weight approx.: 150 kg

Heavy Duty Transport Chassis, Armoured Castor, Heavy Duty Castor, 4 pcs PAGUS 350 x 300 x 67 mm Minimum height: 67 mm bearing surface (machine): 350 x 300 mm Mounting thread: M16 x 2.0 / M20 x 2.5 ( in the steel plate ) 2x Bore in the frame: Ø 20 mm Material thickness: 6 mm ( contact surface ), 15 / 30 mm ( frame ) Number of rollers per chassis: 4 pieces Roll diameter: Ø 45 mm Roll length: 120 mm Weight: 20.5 kg per chassis Other quantities on request ! as good as new ! Dimensions ( single chassis ): 350 x 300 x 67 mm Dimensions (packaging): 800 x 400 x 310 mm

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,800 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg

Key data: 1400 , 1000 , 11280

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

Turning diameter: 2500 mm Center distance: 3000 mm Spindle bore: 102 mm Numbers of bed guide ways: 1 Weight between centres maximum: 1 kg Centre lathe ZERBST - DP 1/S2 Zerbst modulair lathe 2500 x 3000 mm MACH-ID 2179 Make: ZERBST Type: DP 1/S2 Year: 1985 DBC Turning Length:      3000mm Swing over bed Ø:        2500mm Swing over cross slide Ø:1500mm Spindle bore:            102mm Length:                  0mm Width:                   0mm Height:                  0mm Weight:                  0kg Floorplates 4500 x 2200 mm 

Turning diameter: 1400 mm Center distance: 13000 mm Spindle bore: 1000 mm Numbers of bed guide ways: 1 Weight between centres maximum: 20000 kg CNC Brand: Siemens Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller est 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Swing over bed Ø:        1400mm Swing over cross slide Ø:1100mm DBC Turning Length:      13000mm Spindle power:           129kW Workpiece weight:        20000 Speeds / ranges:         1 - 300Rpm Feed rate X-Axis:        4500mm/min. Feed rate Z-Axis:        4500mm/min. Length:                  20000mm Wi ...

Turning diameter: 1600 mm Center distance: 7000 mm Spindle bore: 110 mm Numbers of bed guide ways: 2 Weight between centres maximum: 15000 kg CNC Brand: SPC CNC latheGurutzpe - GLX 16 MACH-ID 8505 Make: Gurutzpe Type: GLX 16 Control: Siemens 840D Powerline Year: 2016  Sauter 4 positions revolver Motorized tailstock 2 C-Type steady rest Work load not supported 15 Ton High pressure coolant with filter Spindle nose A-20 Torq 24000 Nm Chip conveyor DBC Turning Length:      7000mm Swing over bed Ø:        1600mm Swing over cross slide Ø:1300mm Spindle bore:            110mm Spindle power:           88kW Bed width:               1100mm Tailstock spindle Ø:     220Ø Speeds / ranges:        & ...

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Heavy duty mobile slicing machine with slicing, dicing and dicing capabilities - FAM DORPHY Heavy duty mobile slicing machine with slicing, dicing and dicing capabilities. Suitable for any firm textured product, such as potatoes, beets, carrots, cabbage, mushrooms, peppers, onions, pickles and zucchini, as well as broccoli and cauliflower. Manufacturer: FAM Model: DORPHY Serial number: 12158 Year of manufacture: 2020 Condition: very good (used)