hank used for sale

Inlet/outlet diameter: 80 mm Optimal temperature: +2 - +43 Celsius degree Refrigerant type: R22 Refrigerant amount: 7,5 kg Voltage: 400 V

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...

Volume flow: 470m³/h, operational overpressure: 7-16bar, coolant: 407c, connected load: 1.48kW.

faceplate diameter: 3.000 mm swing diameter: 4.000 mm turning height: 2.500 mm Control: Fanuc 0i-T max. workpiece weight: 30.000 kg table:: table diameter: 3.000 mm table speeds: 1 - 100 1/min power capacity - table: 60/75 kW C - Axis:: Working speed: 0 - 180 °/min max. table speed: 0,5 1/min turret slide:: Shank diameter: 50 mm spindle cone: ISO 7/24 No.50 Spindlespeed: 15 - 1.500 min/-1 power capacity - Tool Spindle: 22 / 26 kW ram cross section: 300 mm axis stroke:: x-axis: 2.335 mm z-axis: 1.600 mm cross rail adjustment: 2.000 mm Tool-Presetter:: tool taper: MAS BT 50 number of toolpositions: 24 (2x12) pos. max. tool weight: 90 kg draw bolt: DIN.69872 feeds:: rapid feed (X / Z): 8 m/min rapid traverse of the crossrail: 500 mm/min total power requirement: - kW weight of the machine ca.: 95 t dimensions of the machine ca.: 14,0 x 7,4 x 9,0 m Documents: Coolantsystem: 4-Jaw-Chu ...

Turning diameter: 1600 mm Turning height: 1400 mm Chuck diameter: 1400 mm Number of chucks: 1   CNC Brand: _Unknown / Other CNC high precision, vertical boring and turning mills to deliver superior performance. High productivity High reliability High accuracy Max. turning Ø:            1600mm Table  Ø:                  1400mm Horizontal movement support:1600mm Stroke ram left:           900mm ATC / revolver:            24 Speeds / ranges:           320Rpm Power:                     45kW Maximum turning height:    1400mm C-Axis:                    360000° Power live tools:    &nb ...

Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigerant-air dryer with approx. 28,000 operating hours fully automatic, internally completely piped and wired compact system, single-stage oil-injected, air-cooled, silenced Operating pressure 10 bar Volume flow 40 m3/hour Capacity 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

Manufactured: Atelier Francois Type: CE 68B Capacity: up to 2600 m3/h Electric motor: 450 KW Electrical connection: 3 x 400 V / 50Hz Complete with: •Electrical cabinet with Star/Delta start with microprocessor L1 •Dryer type Hankinson •Radiator cooling system •Electrical connection between control cabinet, motor, dryer

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

Semi Automatic or Automatic Shrink Wrapper with welding bar to 22 P M New Automatic shrink wrapper with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines Suitable for packaging individual or already packaged products such as boxes trays hanks of cable parquettes or light to very light products with a minimum height of 3 mm such as boxes linen reams of paper magazines leaflets Possibility of total closing of the bundles by means of superimposition and lateral auto gluing The single block systems with welding unit and tunnel in a single robust structure were designed to have reduced external dimensions making them compact and reliable suitable for packaging products with heat shrinkable flat leaf polythene film individual or grouped products with just film or film plus cardboard divider or tray Speed from 10 to 22 p ...

Used PET Complete Bottling Line 6000 bph yom 2007 40 bar compressor Ateliers Francois 1 1 Hankison compressed air dryer 1 2 EVAPCO Europe 4 5 6 6R 41T 50 50 compressor cooler 1 30 2 70 2 60m Blow molding machine SIPA 1 50 0 90 1 90m Receiver D80 1 8 m high Preform loader for supplying pre forms to the Automatic heating and blowing machine 1 30 1301 90m Unloading hopper Elevator for pre forms SIPA 1 60 1 60 3 00m PET triblock SGE TRI BLOC S317 2 10 1 90 4 00 4 60 2 20m Saturator for saturation of CO2 SGE Saturatore 1 5 1 5 2 5m Elevator and conveyor for feeding plugs 1 0 1 0x4 0m Labelling machine SGE OXE 2 20 1 95 1 90m Thermal packaging tunnel shrink wrapper 9 20 1 45 1 80m S G E handle applicator for product packaging Palletizer for S G E packages on pallets 2 60 3 0x4 10m S G E 1 5 1 0x1 6m cardboard stacker Pallet wrapper S G E stretch film 2 90 2 00 2 00m Used PET Complete Bottling  ...

Semi Automatic or Automatic Shrink Wrapper with welding bar New The automatic machine is very fast format changes 90 product feeding belt possibility of introducing product up to three rows with eccentric system the pusher works without air and has a motor controlled by inverter and encoder perfect to be inserted in automatic lines Production can vary according to the number of rows required Suitable for packaging individual or groups products in multiple lines in the desired format such as boxes packets of coffee trays etc Automatic and semiautomatic machines with welding bar with product feed conveyer in line set up for manual loading of the product on the belt or inserted in completely automatic lines Represent maximum simplification in bundling machine Created with a single supporting structure Suitable for packaging individual or already assembled products such as boxes trays cable  ...

Car HYUNDAI Tucson ix35 1.6 GDI, registration date 26.09.2018, 41.743 km (excl. 13.04.2024), 1.591 cm³ Petrol, 97 kW, EURO6, VIN TMAJ2811AJJ660441, Exterior colour white, Alloy wheels with summer tyres (Hankook Ventus Prime 2 215/70 R16 100H DOT 0218), Multifunction steering wheel, Automatic climate control, Heated seats, Seats fabric black, Electric windows front + rear, Audio system, Reversing camera, Interior not cleaned but maintained, Boot cover, 2 keys, Registration certificate part 1 +2 is available, HU? Report is available!, Vehicle documents incl. service booklet is available, Vehicle is deregistered, has been standing for several months, Inspetkion due, 12V battery deeply discharged!, HU 09/23