gildemeister dmg used for sale

Key data: 324 mm, 600 mm

CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions

turning diameter: 210 mm turning length: 300 mm control: Siemens 840 D Shop Turn swing dia.: 330 mm spindle passage: 51 mm spindle speed:: 6000 U/min spindle motor: 10/7,5 kW max. torque on the spindle: 115/86 Nm no. of tools in turret 1: 12 VDI 30 driven stations: 12 VDI 30 speed of driven tools: 5000 U/min drive milling spindle: 3,7 kW rapid traverse: 20/30 m/min tail stock: MK 3 range L-W-H: 6,0x 1,75 x 1,7 m weight of the machine ca.: 3,5 t CNC lathe with driven tools and barfeeder - collet chuck E 173 - chipconveyor - Siemens Shop Turn - dialog programming Shop Turn - parts catcher - short bar magazine IEMCA KID 70 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained. In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.

Controller FANUC 16i-TB Main and counter spindle: max. rod diameter 12 mm max. speed 12,000 1/min Travel: X1 (linear)= 30, Y1= 195, Z1= 120 mm Y2= 180, Z2= 180 mm Tool holder 1: 5 tools, 4 of which are driven Tool holder 2: 8 Tools Bar feeder FMB minimag 3200

CNC lathe Gildemeister CTX 400-Series 2 - Control/Heidenhain CNC Pilot - Max. circulation diameter / face carriage 470 mm - Max. circulation diameter / bed 570 mm - Max. turning length 600 mm - Infinitely variable speed 25-5000 rpm - Rapid traverse 20/24 m/min - Spindle bore approx. 79mm - Chuck diameter max. 250mm - Disc turret - Cross-section max. 20/20mm - Morse taper tailstock MK4 -Conveyor 9oxqtvdvxq Dimensions approx. LxWxH 5.5x2.5x1.7 meters Weight approx. 5700 kg

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

: 2 turning diameter: max. 250 mm toll turrets: 2 x 12 control: Fanuc 16 T tool taper: HSK 63 : 04800000181 frequency: 50 Hz ampere: 168 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 7-axis Gildemeister TWIN 65 lathe was manufactured in 2004. It is equipped with a Sinumerik 840D control system and features both a main and counter spindle with speeds up to 5000 rpm. The primary spindle drive offers a robust 35 kW of power, while the counter spindle delivers 26 kW, accommodating a rotation working range of Ø 250 mm for the main and Ø 120 mm for the counter spindle. Additionally, this lathe includes a bar feeder with a maximum diameter capacity of 62 mm. The Gildemeister TWIN 65 machine we have for sale is ideal for efficient, high-precision manufacturing. Reach out for more information about this lathe.

turning diameter: 200 mm turning length: 400 mm control: FANUC, 0i-TC swing diameter: 330 mm spindle bore: 68 mm x-travel: 160 mm z-travel: 450 mm spindle turning speed range: 5000 U/min C-axis resolution: 0,001 ° tool turret: 1 x 12 Pos number of driven tool stations: 6 tool taper: VDI 30 speed of driven tools: 4500 U/min total power requirement: 16,5 kW weight of the machine ca.: 3,2 t Accessories: hydr. 3-jaw chuck 200 mmø, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 42 mm turning length: ca. 120 mm control: 160i Fanuc Main spindle:: max. usable bar diameter: 42 mm Max. speed main spindle: 6.500 min/-1 power capacity - main spindel: 5,5 kW C-Axis: 360 ° Subspindle:: max. usable bar diameter: 42 mm Max. Speed Subspindle: 6.500 min/-1 power capacity - Sub spindle: 3,7 kW C-Axis: 360 ° slide I:: x-axis: 65 mm y-axis: 350 mm z-axis: 120 mm rapid traverse: 30 m/min Accelaration: 5/10 m/s² feed power: max. 350 daN Tool Slide I:: number of toolpositions: 13 ((6+3)+4) pos. Number of fixed tools: 6+3 pos. Number of driven toolspositions: 4 pos. collets: ESX 20 slide II:: x-axis: 265 mm z-axis: 320 mm rapid traverse: X: 18 / Z: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Slide Y2:: y-axis: 326 mm rapid traverse: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Tool Slide II:: number of toolpositions: 11 ((4+3 ...

greates pass round over bed: 500 mm swing diameter over bed slide: 285 mm turning length: 1500 mm control: HEIDENHAIN control: MANUAL PLUS centre height: 250 mm centre distance: 1500 mm spindle bore: 70 mm spindle turning speed range: 8 - 2800 U/min spindle head: DIN 55027 Gr. 8 spindle drive: 11 kW max. torque on the spindle: 1050 Nm feed power X/Z axis: 5000 / 10.000 N rapid traverse X-axis: 6 m/min rapid traverse Z-axis: 8 m/min tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 3,30 x 1,92 x 1,93 m Accessories: 3-jaw chuck FORKARDT 250 mmø, 3-jaw chuck FORKARDT 315 mmø, face plate 500 mmø, combined changing tool post SANDVIK- COROMANT for inserts MULTIFIX C and CAPTO C 5, various inserts MUTLIFIX C and CAPTO C 5, 2 solid steadies,  ...

Key data: 680 mm, 635 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 420 is in very good mechanical condition, running in prototype construction with light and small machining (9981 spindle hours). The machine can be viewed in our warehouse under power, probably from the end of May Accessories Machine: - Control SIEMENS 840D Powerline with SHOP TURN - Suction (see picture) -Conveyor - Driven tools and tool holders (used) - 1 cheek lining - 1 collet chuck - Parts catcher with outfeed conveyor - C-axis, X-axis, Z-axis and Y-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 10 swivel holders - 8 pcs. normal angle holders - 6 driven tools (3 brackets and 3 front holders)

Key data: 210 mm, 580 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 310 is in very good mechanical condition, running in small parts production with light machining (11834 spindle hours). The machine can be viewed under power in our warehouse, probably from the end of May/beginning of June. 07 Machine Accessories: - Control Heidenhain IT-Plus -Conveyor - Driven tools and tool holders (used) - 1 piece of jaw lining with used jaws - Parts catcher - C-axis, X-axis and Z-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 4 driven tools (2 brackets and 2 front holders) - Tool holder VDI30

Description: CNC control SIEMENS 840 D Turning length (max.) 330 mm Swing diameter (max.) 200 mm Center width 800 mm X-axis 1100 mm Z axis 300 mm Maximum partial weight 20 kg Spindle bore 56 mm Number of revolvers 12 Number of tools 8 Spindle speeds 7000 rpm Spindle motor power 11 kW weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 1,600 mm

Description: 1 used CNC turning and milling center Make: Gildemeister, model: CTX 420 V 3 with Heidenhain 4290 iT, built in 2004, turning diameter 565 mm Turning length 625 mm X-travel 260 mm Speed ​​range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW max. torque 270 Nm Spindle nose  ,170h5 Bar diameter 65 mm C-axis 0.001° turret stations 12 pos. Tool holder VDI 40 Powered tool stations 12 pos. Speed ​​driven tools 4500 rpm Drive power for powered tools 12 kW Tailstock holder MK 4, Rapid traverse X / Z 60 / 45 m/min Space requirement approx. with bar loader 7495 x 2484 x 1885 mm Accesories: Bar loader 3200 mm Iemca Master 880 MP-E chip conveyor Parts catcher Conveyor belt Measuring arm C axis driven tools collet chuck Tool package documentation data backup very well maintained machine control: Heidenhain 4290 iT, Approx. Onsite Dimension. (l x w x h): 7,500 x ...

Description: 1 used cycle lathe Make: Gildemeister Model: N.E.F. 320 K, built in 2004 Condition: very good Siemens control (touch) Swing diameter 320 mm Turning length 750 mm Speed ​​3500 rpm Drive power 9 kW Bar diameter 50 mm Tool holder Multifix size. b Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Accesories: 3 jaw chuck Forkardt 200 Tool package documentation Drehlänge: 750 mm, control: Siemens (Touch), turning speed range: 3,500 rpm, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,600 mm, weight approx.: 2,500 kg

Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Description: 1 used CNC lathe make: Gildemeister, model: CT 40, built in 1987 EPL 2 control Switch-on hours: 2250 hours. max. turning diameter 400 mm Turning length 600 mm Spindle holder 140h5 Spindle bore 72 mm Drive power 11 kW Speed ​​range continuously variable 20-4000 min Z rapid traverse/feed speed 10/5 m/min. X rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool locations 12 Accesories: Manual chuck documentation Data backup. turning diameter: 400 mm, Drehlänge: 600 mm, Read off operating hours: 2,250 h, control: EPL 2, toolchanger positions: 12, spindle bore: 72 mm, turning speed range: 20-4000 rpm, weight approx.: 3,400 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,780 x 1,800 mm

CNC lathe Manufacturer: Gildemeister Type: CTX 620 Linear V3 Year of construction: 2007 Control: Heidenhain IT Circulation diameter: 800 mm Drive power: 40%/100% ED 43/33 kW Speed range from – to: 20-2500 rpm Weight approx.: 9600 Kg Equipment: Axes: X,Z,C axis Powered Tools: Yes Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mount: MK5 Chip Conveyor: Yes Very good condition. Errors excepted

CNC lathe Manufacturer: Gildemeister Type: CTX 410 V3 Year of construction: 2006 Control: Heidenhain IT Circumferential diameter: 505 mm Drive power: 40%/100% ED 28/21 kW Speed range from – to: 25-5000 rpm Weight approx.: 5600 Kg Equipment: Axes: X,Z,C axis Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mounting: MK4 Chip Conveyor: Yes Very good condition. Errors excepted

The deep drilling machine B3N 800 can be seen live by appointment. The machine worked until 10/2023. The technical condition corresponds to the age of the machine. The basic bed of the machine is composed of 4 parts. The total area needed to store the machinery and filtration is 25 x 3.5 m. The length of the machine itself without filtration is 22.5 m.

Control Siemens 840D - Powerline Rotary diameter. [mm] 640 Turning length [mm] 1500 Main spindle: Motor spindle technology Speed 4,000 rpm Power 45 kW Torque 750 Nm Bar passage 90 mm C-axis 0.001° Workpiece clamping 3-jaw chuck, Röhm KFD-HS 315/3 Sub-spindle: Motor spindle technology Speed 4,000 rpm Power 45 kW Torque 750 Nm C-axis 0.001° Bar passage 90 mm Workpiece clamping 3-jaw chuck, Röhm KFD-HS 315/3 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 B-axis 0.001° Swivel range +/- 120° Travel in X/Y/Z 550/220/1,585 mm Tool carrier II (X/Z): Technology Turret with 12 stations Tool holder VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm General: Tool Magazine Shelf Magazine, 120-fold

turning diameter: 465 mm turning length: 1014 mm control: Siemens 810 D PL swing dia.: 680 mm spindle passage: 90 mm number of controlled axis: 3 turning speed range: 3250 U/min power requirement: kW rapid speed: 30/15/33 m/min number of tapers in turret head: 12 VDI 40 number of driven tools in turret: 6 VDI 40 Spindel speed of driven tools: 4000 U/min tail stock: Ja range L-W-H: 6,0 x 1,8 x 2,0 m weight: 7,5 t Used CNC- Lathe with driven tools - 3-jaw chuck SMW BH 450 - chip conveyor - production lamp - Siemens shopturn dialog programming The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens ... Sinumerik 840 D Turning diameter ... 400mm Rotation length ... 600mm Inclined bed Axis Y ... 64mmmm Counter spindle Spindle bore ... 51mm Driven Tools Bar feeder Machine weight... 3700kg Number of spindle deer ... 0-6000/min. Axis X ... 160mm The machine is in good condition, possible to test under electricity.

Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.

Key data: 1175 mm, 630 mm

Control Siemens 840 D Powerline Turning length 1175 mm, turning diameter 640 mm Plan path X 1 . 550 mm, X 2 . 180 mm Longitudinal path Z1 . 1185 mm , Z 2 . 1050 mm Main spindle as integrated spindle motor ISM 65 with 5000 rpm Partial hollow clamping device 68 mm Cross slide top with turning and milling spindle as motor spindle with 3-fold Hirth toothing at 12,000 rpm Spindle is new 0 hours 1°Indexing for molded liquid locking during turning Y-axis +- 90 mm B-axis +- 120° interpolating with hydraulic clamping Tool magazine with 36 slots Absolute direct displacement measurement systems in all linear axes Coolant tank 600 l with belt filter system IKZ Conveyor Counter spindle as integrated spindle motor ISM 76 , partial hollow clamping device 67 mm with 5 000 rpm Coolant pressure 40 bar additional for the turning and milling spindle

Key data: 200 mm, 1500 mm

Center width 1500 mm Control Heidenhain Manuall-Plus Multifix Size C 8-fold disc turret Fabr. Sauter

Gildemeister CTX 410 Year of construction: 2004 Controls: Heidenhain CNC lathe Travel: x-travel 250 mm z-travel 635 mm Max. turning length: 600 mm Circulation diameter over bed: 505 mm Circulation diameter over face slide: 365 mm Spindle bore: 87 mm Max. chuck diameter: 250 mm Max. torque: 320 Nm Max. tailstock displacement by hand/self-acting: 580 mm Tailstock mount/stroke: MK4/580 mm Area requirement (LxWxH): 6.5 m x 4.0 m x 1.8 m Weight: 4500 kg

Control Heidenhain Plus IT with Turn Plus Turning diameter max. circulation 520 mm Turning length 1175 mm Cross slide at the top with turning/milling spindle as motor spindle, mounting HSK 63A Main / Counter Spindle C-axis Y-axis ±90 mm B-axis ±120° 12-speed turret with driven tools Tool disc magazine 1 x 36-speed Tailstock Conveyor Weight 15 t

GILDEMEISTER CTX 320 linear V6 Turning-milling centre with complete equipment Year of manufacture: 12/2002 Control: SIEMENS 840D POWERLINE Machine number: 937060 Spindle hours: only approx. 18,245 (as of 06.05.24) Equipment: Main and sub-spindle Y-axis C-axis Turret with 12 driven tool stations approx. 10 pieces of driven tools approx. 25 VDI mounts 2 pieces collet chuck approx. 30 pieces of collets Parts Conveyor Belt Parts Pickup Probe Main Spindle Probe sub-spindle LNS QUICK LOAD SERVO III Bar Feeder 2 Foot Switches Operating Instructions/Documentation All other accessories visible in the photos and video are not included in the scope of delivery, so they are not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. More photos on request. Equipment, technical dat ...

Description: Various blanks from Gildemeister EPL control system Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg

Control: Fanuc 310 i, Max bar diameter [mm]: 25, Number of linear axis + C axis: 6 + 2, Spindle speed [rpm]: 10.000, Spindle motor [kW]: 3,7, Z - travel [mm]: 80 | 300, X - travel mm: 50 | 240, Y - travel [mm]: 350 | 120, High pressure coolant: 20 bar, Auto bar loader: FMB Turbo 3-26/3200, Machine weight approx. [kg]: 3.800

turning diameter: 200 mm spindle distance: 800 mm control: Sinumerik 840D turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D sub spindle 2 x 12-fold revolver with driven tools 2 x C-axis Y-axis Bar loading magazine chip conveyor coolant device 5 axial and 5 radial driven tools are with the machine Technische Daten / technical details: max. Drehdurchmesser über Schlitten / max. turning diameter over sledge 200 mm max. Schwingdurchmesser / max. rotary diameter 240 mm Spindelabstand / distance between spindles 800 mm Planweg/Längsweg / cross travel/longitudinal travel 190/555 mm Spindelbohrung / spindle hole 65 mm Drehzahlbereich / spindle speed 25-5000 UpM / rpm Drehzahlbereich Gegenspindel / spindle speed opposed spindle 31-6300 UpM / rpm Drehzahl angetr. WKZ / speed of the driven tools  ...

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

bar material dia.:36 mm chuck diameter:100 mm turning length:580 mm greates pass round over bed:145 mm turning diameter:100 mm turning speeds:2x 25-8.000 1/min positive location each:2xC-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12-fach VDI 25 driven tools:2x 12 turning speeds:31-6.300 1/min control:Sinumerik 840 D total power requirement:50 kVA weight of the machine ca.:6 t dimensions of the machine ca.:4,8 x 2,2 x 2 m turning- milling center with 8-axis (X1:220mm, Z1:320mm, X2:120mm, Z2:340mm, Z3:380mm, C1, C2, Y-axis) high pressure pump 20bar, tailstock on right side, collet device on main and subspindle, parts conveyor, bar magazin IRCO Simag 42.1-R for 3,2m bars, chip conveyor, approx.109.700 hours "machine on", approx. 84.300 hours "spindle on"

turning diameter:700/410 mm turning length:800 mm speeds spindle 1:5000 1/min speeds spindle 2:6000 1/min Main spindle capacity:32/25 kW hollow clamping cylinder:77 mm y-Axis min./max.:+/- 100 mm tool magazin::48 Pos tool taper:HSK 63 milling head speed:12.000 1/min milling spindle drive:22,5 / 19 kW total power requirement:74 kVA dimensions of the machine ca.:6,50 x 2,68 x 2,00 m sub spindle power:14,5 / 12,5 kW CNC - Turnmill with B-axis (torque-motor) and subspindle, 5-axis simultaneously machining, alternating speed, MPC 1.0, 3-D touchprobe BLUM TC62, Main spindle ISM 76, C axis and brake Subspindle ISM 52, C axis and brake Partly hollow clamping device for subspindle ( D = 52 ), Differential pressure device for main- and subspindle coolant device 8/20bar, 20/25 l/min, paperfilter, coolant through subspindle, Chip conveyer, Chuck flushing device (main- and subspindle), oilmist suctio ...

swing diameter:320 mm control:840 D SIEMENS turning speeds:5000 1/min spindle drive:20 / 27 kW chucking diameter:250 mm travel -x axis:650 mm travel -z axis:300 mm turret head:12 Pos. tool holder:VDI 40 toolpiece turning speed range:4000 1/min work piece power:max. 11,7 kW weight of the machine ca.:8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on"

CONTROLS   CNC controls SIEMENS 840 D MIT SHOPTURN BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1   number of y-axes: 1 WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 330 mm   bar diameter (max): 51 mm MAIN SPINDLE   spindle revolutions (min): 20 /min   spindle revolutions (max): 6000 /min   drive power S1 100%: 12 kW   spindle torque S1 100%: 115 Nm   spindle diameter: 100 mm   c-axis: yes X/Z SLIDE   Z-axis travel: 450 mm   X-axis travel: 202 mm   Y-axis travel: 80 mm   rapid traverse Z: 30000 mm/min   rapid traverse X: 24000 mm/min   rapid traverse Y: 10000 mm/min   tool f ...

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

Deckel Maho DMG HSC 55 Linear 5 axis simultaneous machining center Control Unit: Heidenhain iTNC530 2 pieces Hepa filter and dust collector system Tool holder : HSK50 Spindle power: 29 / 22 [kW] Spindle speed : 42.000 [rpm] X / Y / Z Axis: : 450 / 600 / 400 mm Tool magazine capacity: 120 Tool probe: Heidenhain laser

X-axis 1000 mm Y-axis 800 mm Z-axis 500 mm Table dimensions 1250 x 800 mm Max weight on the table 1200 kg Admission in spindle (ISO) SK 40 Power on the spindle 15 kW Control Dialog 112 Toolchanger yes Number of toolholders 30x Number of rotations 15 000 rpm Power principal motor 50 kVa Length 4090 mm Depth 3890 mm Height 2960 mm Weight 9 ton Cooling-system yes

Heidenhain Measuring System LC 182 Y-axis overhauled, works flawlessly

x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm Control: SIEMENS 8400 Powerline 3D numbers of pallets: 6 size of pallet: 1.250 ×1.000 mm T-slots: DIN 55201-A2 c-axis: 0,001 ° spindle: 85/65 kW spindle (milling):: 0,000 rapid travel x/y/z: 60.000 mm/min tool adaptor: HSK-A 63 DIN 69893 Speed: 20-30.000 U/min turning tools travel - vertical: 40/32 mm tool magazin:: 120 Internal cooling system: 50 bar Chip coveyor: Inkl. handwheel: SIEMENS 840D total power requirement: 139 kWA weight of the machine ca.: 55 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Basic Machine Universal machining centre DMU 60eVo New DMG MORI Design traverse path X/Y/Z 600/500/500 mm / X/Y/Z 23.6/19.6/19.6 in motorspindle speedMASTER® SK 40/BBT speed range 20 - 18.000 min-1 SK40 speed range 18.000 - 20.000 min-1 SK40-BIG PLUS® 35 kW (40% ED), 25 kW (100% ED) 46.9 hp (40% DC), 33.5 hp (100% DC) tool taper SK40 (DIN ISO 7388-1-A, AD) for Pull-Studs DIN ISO 7388-3-A, AD NC swivel rotary table chain type tool changer with 30 positions and double gripper active cooling direct measuring system full cabin Swarf conveyor (scraper type), spray gun MPC (Machine Protection Control) 3D-Control, ERGOline® control Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Control CELOS with Siemens 840D sl Operate includes 21,5 ERGOline®  ...

Milling machine DECKEL MAHO DMG 125

CNC Universal Machining Center DECKEL MAHO DMU 95monoBlock NEW DMG Design With path control CELOS with Heidenhain TNC 640 Year of construction: 2023 ( NEW MACHINE) Travels: X 950 Y 850 Z 650 Speed range: 0 – 20000 rpm infinitely variable (HSK 63) With the following accessories: NC swivel rotary table 0 850 mm x 750 mm integrated in rigid table 1000 mm x 750 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Tool measurement in the BLUM Laser DIGILOG work area 3 D Probe Heidenhain TS 460 3 D quick Set Accuracy Package ATC (Application Tuning Cycle) IKZ 40 bar with 600 l tank and paper belt filter Chip rinsing gun with pump 1 bar/40 l Conveyor Digital Manufacturing Package , DMG MORI PLUGIN TOOL , DMG Service Agent Coolant Ring Nozzle Cooling device blowing air Coolant system Oil/Emulsio ...

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece