formwork used for sale

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

We offer a new, universal element slab formwork system EVODECK 205m², directly from the factory at great conditions, special net price 60.312,00€ Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 100 Element EVODECK 150x120 cm with PP formwork plate 8 Element EVODECK 150x75 cm with PP formwork board 8 Element EVODECK 120x75 cm with PP formwork board 60 Drop head EVODECK 90 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 6 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and discou ...

We offer a new, universal element slab formwork system EVODECK 300m², directly from the factory at great conditions, special net price € 87,368.00 Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 150 Element EVODECK 150x120 cm with PP formwork plate 10 element EVODECK 150x75 cm with PP formwork board 10 element EVODECK 120x75 cm with PP formwork board 90 Drop head EVODECK 135 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 9 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and di ...

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

We offer a Noe Top 2000 wall formwork in ready-to-use condition. Most of the elements are galvanized and covered with plastic formwork. Price without accessories 99,00€/m² 28 pieces 3.31m x 2.65m 8 pieces 2.65m x 1.32m The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

We offer a Dokadek slab formwork 272.62m² with accessories. The formwork is checked and sorted. All elements are covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. Suitable for higher-value applications. New value 120081,00€ - 70% discount = special net price 36150,00€ 77 x 586501000 Dokadek element 1.22 x 2.44m 22 x 586502000 Dokadek element 0.81 x 2.44m 0 x Dokadek compensator 2.44m 27mm / 21mm 0 x Dokadek compensator 1.22m 27mm / 21mm 0 x Dokadek compensator 0.81m 27mm / 21mm 120 x 586506000 Dokadek support head 6 x 586539000 Dokadek corner head 30 x 586536000 Dokadek Wall Head 10 x 183063000 Dokadek Wall Bracket 25 x 586518000 Dokadek suspension bracket H20 4 x 586540000 Dokadek Mounting Rod B 2 x 586541000 Dokadek stripping tool 0 x 582528000 Spring Bolt 16mm 3 x 583011000 Doka reusable container 1.20x0. ...

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

We offer a Doka Framax wall formwork 201m² in original Doka rental warehouse quality. Special net price 46700,00€ + VAT New value approx. 146166€ Complete with accessories, also original Doka rental warehouse quality. Formwork completely cleaned, inspected and sorted. Formwork lining original Doka Xlife exposed concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Partially reassigned. 10 588103500 Framax Xlife element 2.40x2.70m 16 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 8 588122500 Framax Xlife-Uni-Element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 6 588106500 Framax Xlife element 0.45x2.70m 6 588108500 Framax Xlife element 0.30x2.70m 4 588130500 Framax Xlife inner corner 2.70m 4 588126000 Framax outer corner ...

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

We offer a Doka Frami wall and foundation formwork 206,505m² complete with many accessories. The formwork is 90% newly covered with new Finply birch cladding 220- 240g/m²phenolic resin coating. The rest of the elements are checked and sorted and covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. New value approx. 160.592,60€, special net price 41.498,15€ Piece Description 19 Frami Xlife-Element 0.30x1.50m new plywood 2 Frami Xlife-Element 0.45x1.50m new plywood 51 Frami Xlife-Element 0,60x1,50m new plywood 35 Frami Xlife-Element 0.75x1.50m new plywood 2 Frami Xlife-Element 0.75x1.50m used top xlife 7 Frami Xlife-Element 0,90x1,50m used top xlife 6 Frami Xlife-Element 0.90x1.50m new plywood 11 Frami inner corner 1,50m 20cm inner corner 7 Frami outer corner 1.50m outer corner 1 Frami hinge corner A galvanized  ...

We offer a Doka Frami foundation formwork 227m² complete with accessories New value 182913€ Special net price 39818,00€ The formwork is ready for use. Formwork was not checked, but was used by the customer until the end. 26 588406500 Frami Xlife Element 0.90x1.50m 20 588409500 Frami Xlife element 0.45x1.50m 102 588401500 Frami Xlife element 0.90x1.20m 8 588447500 Frami Xlife element 0.75x1.20m 20 588463500 Frami Xlife element 0.60x1.20m 34 588404500 Frami Xlife Element 0.45x1.20m 36 588405500 Frami Xlife element 0.30x1.20m 4 588485000 Frami Inner Corner 2.70m 20cm 8 588472000 Frami Inner Corner 1.50m 20cm 2 588460000 Frami Outer Corner 1.50m 2 588425500 Frami hinge corner I galvanized 1.20m 2 588419000 Frami hinge corner A galvanized 1.20m 12 588471000 Frami Inner Corner 1.20m 20cm 13 588459000 Frami Outer Corner 1.20m 74 588475000 Frami Flat An ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

We offer a position new formwork supports galvanized, with external thread 1,95-3,50m according to DIN Euro standard 1065 manufactured with flat head Class B/D tested 144 pieces a 47,90EUR + 3 x stack pallets 1.43 x 0.87 x 0.69m new a 150.00EUR total 7347,60EUR net Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim, Germany Register court Ulm: HRA722943 VAT-ID-NR: DE279047055

We offer high quality 3S formwork panels with melamine resin coating. Only while stocks last! SFS plus 3-layer panels 200cm/50cm 21mm and 250cm/50cm 21mmnew a 18,50€ / m² from 100m² European origin product Top quality, numerous inserts per page possible. Excl. VAT + Transport Subject to sale They offer on 1 m² Stock on request For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 VAT ID NO.: DE279047055

H16 Timber beam formwork girder Height 16cm, Width 65mm, Weight 3,3kg/meter The tried-and-tested components for many peeling systems. Formwork girders are basic of many formwork systems and can be used individually. The carefully manufactured beams prove themselves thousands of times a day on many construction sites. The location is our warehouse in 5202 Neumarkt For further information or a viewing, I am always at your disposal. You can reach us at Tel.Nr.: +43 664 1296830 or by e-mail: officeberger-international.at Berger Construction Equipment GmbH

We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer several hundred square meters of Paschal Grid formwork for purchase and rent. Ask us for our special item list / stock list. Please always ask with e-mail address, name and phone number- Thank you very much. Formwork, scaffolding, containers and many more MIETEN and BUY at Lerch!

Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Starter package: 10 sqm Hünnebeck Tekko basement and Foundation shuttering, needed. The offer consists of: 12 x Tekko table 90 x 90 24 x Tekkozwinge 12 x tie rod DW15 100 cm 24 x nut We are happy to answer questions phone 06190-93449-0 Please note also our other offers! We can offer you several thousand square metres of used moulds, tools and containers - ask us!

Anchor system DW 15 Nut joint plate new, galvanized = 6,90 EUR/piece Prestressing steel DW15,0,85m = 4,20 EUR/piece Prestressing steel DW15,1,00m = 4,80EUR/piece German product manufactured according to DIN with manufacturer's warranty All prices excl. VAT and transport Subject to clearance Company SFS Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT NUMBER: DE279047055 Office/ warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-Mail: SFsystemst-Online Mobile: 0049 176 70044689 Mr. Becker Registry Court Ulm: HRA722943

Lots of accessories for Doka Framax - please request the parts list

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm 8 pieces 1300 x 490 mm Pos. 7 Masonry formwork 18000 / 1300 x 4 ...

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

We offer a Peri Trio formwork system 319m² complete with accessories in ready-to-use condition. The formwork was cleaned, inspected and sealed with zinc phosphate coating corrosion. Can be used for SB2/3 without any problems. New value approx. 225250,00 € special net price = 61515,00 € corresponds to 73% discount on the new value. On request also smaller or larger quantities, or available individually! Number of pieces Designation Elements TR 270 12 Element TR 270 x 240 top used formlining 12 Element TR 270 x 120 top used formlining 32 Element TR 270 x 90 top used formlining 42 Element TR 270 x 72 top used formlining 5 multi-purpose element TRM 270 x 72 top used formwork lining 10 Element TR 270 x 60 top used formlining 8 Element TR 270 x 30 new formwork lining 2 shuttering elements TR 270x 24 new formwork lining 6 corner TE 270-2 new formwork lining Accessorie ...

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

We offer 65 pieces Hünnebeck Manto 270x240 elements used á 799€/ piece net The formwork is in good immediate working condition. Formlining newly covered or top used. MANTO is a crane-bound formwork system for the formwork of large wall surfaces. We recommend a visit to the formwork and look forward to your visit. If you have any questions, please contact Mr. Becker at 0176-700 446989 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm

We offer for Peri Maximo MX 15 270 x 240 frame formwork: Maximo MX 15 / 270 7 x Element MX 270 x 240, newly occupied, 40% discount a 1599,00€ 18 x Element MX 270 x 240, used, 50% discount a 1332,50€ 2 x Element X 270 x 120, newly occupied, 40% discount a 924,00€ 3 x Element MX 270 x 120, used, 50% discount a 770,00€ 9 x Element MX 30 x 240, newly occupied, 40% discount a 3901,30€ - Frame + formwork skin top condition - Newly occupied or good used formwork skin - Frame primed and varnished with zinc phosphate paint. - SB2/3 easily possible They offer on 1 element MX 270 x 240, newly occupied, 40% discount a 1599,00€ Subject to sale All prices excl. VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Compa ...

We offer 18 x formwork Peri Trio 240 x 120 elements on ( Top-up element ) 10 x Peri Trio 240 x 120, 60 % discount a 739,20EUR - - good used frames - - good used formwork skin 8 x Peri Trio 240 x 120, 50 % discount a 924,00EUR - - good used frames - - new formwork skin Package price: 14.784,00EUR net Also available separately Subject to sale All prices without VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

We offer a position Peri Trio 330, 117,216m² The formwork is in mint condition, checked and sorted. The formwork skin is as good as new, or new, covered with Peri FinPly formwork skin. SB2/3 possible without any problems! Ready for immediate use! 2 elements TR /4 330 x 120, gebr. Plate 4 elements TR /4 330 x 120, new plate 1 elements TR /4 330 x 90, gebr. Plate 1 elements TR /4 330 x 90, new plate 10 elements TR /4 330 x 72, new plate 14 multi-purpose element TRM/4 330 x 72, new plate 11 elements TR /4 330 x 60, new plate 6 Peeling element TR/4 330 x 24, new plate 2 corner TE/4 330, new plate Net price: 39.620,60 € Subject to sale For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/  ...

We offer a Peri Trio formwork system 233,28m² complete with accessories. The formwork is in a completely mint condition and covered with new original Peri Finply, or plastic formlining Hewagen II. The frames are completely cleaned and sealed with zinc phosphate coating corrosion. The formwork is immediately suitable for higher-quality applications, e.g. SB3. Other elements or accessories available on request. 18 Element TR 270 x 240 new formlining 14 Element TR 270 x 120 new formlining 8 Element TRS 270 x 90 new formlining 6 Multipurpose element TRM 270 x 72 new bel. 4 Element TR 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 6 corner TE 270-2 new formlining 160 Richtschloss BFD, dir. 30 compensating bars TAR 85 new 2 offset hooks Maximo 1,5 T new 1 transport hanger MX / Trio new 12 frontal anchors TS, dir. n ...

We offer Peri Maximo MX15 wall formwork approx. 3000m² Up to 55% discount on the new value ! - Frame and formwork top used - Partly newly occupied with original Peri or Schaltec replacement plates - for SB 2/3 easily possible - ready for immediate use Inventory available on request. Complete with accessories on request. If you have any questions, please do not hesitate to contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

We offer formwork Peri Trio 270 x 240, 18 pieces with 55% discount on a new value of 2.994,00 €/pcs. = Net price 1.347,30 €/pcs. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, newly occupied, checked and sorted. Available individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943

We offer a Peri Trio formwork system 172,30m² complete with accessories. The elements are all in top used condition, or covered with new Finply formlining. Fair-faced concrete class 2/3 possible without any problems. Elements TR 270 12 Element TR 270 x 240 8 Element TR 270 x 120 8 Element TR 270 x 90 4 Element TR 270 x 72 4 Multipurpose element TRM 270 x 72 10 Element TR 270 x 60 8 Element TR 270 x 30 new formlining 2 formwork elements TR 270x 24 new formlining 6 corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 compensating bars TAR 85 12 Scaffolding bracket TRG 80 2 displacement hooks MAXIMO 1.5 t 1 transport hanger MX new 2 reusable containers steel 80 Prestressing steel DW 15/0,85m new 160 mother joint plates, new purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair cond ...

We offer a refurbished Peri Maximo 270 wall formwork 218.42m² complete with accessories. Formwork cleaned, checked, sorted and corrosion sealed with zinc phosphate coating. Absolute top quality, ready for use for SB 3 without any problems. New value 161576€ Special net price 73255,00€ + VAT BOM can be customized if desired. Also available individually. 16 112006 Element MX 270 x 240 8 112022 element MX 270 x 120 8 112045 element MX 270 x 90 8 112200 Element MX 270 x 60 8 112078 element MX 270 x 45 8 112090 Element MX 270 x 30 8 112849 Multi-purpose element MXM 270 x 60 6 115255 Inside Corner MXI 270 x 50/20 6 112806 Outside corner MXA 270 x 45 2 114165 Wall Thickness Compensation WDA MX 270 x 4 2 114186 Wall Thickness Compensation WDA MX 270 x 5 2 114174 Wall Thickness Compensation WDA MX 270 x 6 2 114128 Wall Thickness Compensation WDA MX 270 x 10, Alu  ...

We offer a Peri Maximo 270 formwork 221.72m² complete with accessories. The formwork is checked and sorted. Frame cleaned and corrosion sealed with zinc phosphate coating. Formlining used, or new for SB 2/3 ready for use without any problems. New value according to price list 2023 = approx. 172143,00€ Special net price 59500,00€ corresponds to 65% discount Maximo MX15 270 16 x112006 Element MX 270 x 240 8 x112022 Element MX 270 x 120 10 x112045 Element MX 270 x 90 6 x112200 Element MX 270 x 60 8 x112090 element MX 270 x 30 6 x112849 Multi-purpose element element MXM 270 x 60 8 x112078 Element MX 270 x 45 6 x112806 Outer corner MXA 270 x 45 2 x111872 Articulated corner MXGA 270 2 x113203 Articulated corner MXGI 270 6 x115255 Inner Corner MXI 270 x 50/20 2 x114165 Wall Thickness Compensation WDA MX 270 x 4 2 x114186 Wall Thickness Compensation WDA MX 270 x 5 2 ...

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

The frames and skin are in a good working condition with used X-Life and parts of it are new with Fin-Ply. 6x Framax 2,40 x 3,30m 66x Framax 1,35 x 3,30m 27x Framax 0,90 x 3,30m 45x Framax 0,60 x 3,30m 8x Framax 0,55 x 3,30m 2x Framax 0,50 x 3,30m 14x Framax 0,45 x 3,30m 15x Framax 0,30 x 3,30m 1x Framax Uni 1,20 x 3,30m 4x Framax Uni 0,90 x 3,30m 22x Framax Inside corner 3,30m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency. Rapid working as so few worksteps are involved forming ...

Formwork inclined columns newly hot-dip galvanized 2,10-3,50m a 40,90EUR/ pcs. New galvanized or painted construction supports 3.00m, 3.50m, 4.00m at great conditions directly from the factory. From 21,50€/ piece.+ VAT Construction support painted 1,60m - 2,90m = 21,50€/ piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, ...

We offer original Doka slab formwork accessories. Everything controlled and sorted. Immediately ready for use! 377 pieces Doka fork head, gebr. 11,50€/ pcs 78 pieces Doka lowering head, gebr. 16,00€/pcs. 47 pieces Doka Tripod, gebr. 25,00€/pcs. 2 x Doka lattice box, gebr. 1,70x0,85m 150,00€/pcs. 5 x Lattice box, gebr. 50,00€/pcs. Prices plus VAT & transport! If you have any questions about 0176, Mr. Becker 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

We offer 18 pieces Peri Trio 330 x 240 elements refurbished. Newly covered with original Peri Finply formwork. Frame cleaned, primed and painted with zinc phosphate coating. 50% discount on the new value of 3683,00€ = 1841,50€/ piece. Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

We offer a Doka Framax Xlife plus 163.67m² with a 65% discount. Original value: €112,280.00 - Special net price €39,298.00 + VAT Complete with accessories on request. Formwork completely cleaned, checked and sorted. Formlining exposed concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value operations. Piece designation 1 Framax Xlife plus Element 2,70x3,30m 8 Framax Xlife plus Element 1,35x3,30m 8 Framax Xlife plus Element 0,90x3,30m 6 Framax Xlife plus Element 0,75x3,30m 5 Framax Xlife plus Element 0,60x3,30m 2 Framax Xlife plus Element 0,55x3,30m 17 Framax Xlife plus Element 0,45x3,30m 1 Framax Xlife plus Element 0,30x3,30m 4 Framax Xlife plus-Element 1,35x2,70m 2 Framax Xlife plus-Element 0,90x2,70m 1 Framax Xlife plus-Element 0,75x2,70m 6 Framax Xlife plus-Element 0,60x2,70m 2 Framax Xlife plus-Element 0,55x2,70 ...