used Folding Machines for sale

Key data: 3280 mm, 3 mm

with deer's foot tool Sharprail Motorized bending beam lowering Motor lower cheek lowering Opening width: 180 mm Bending angle: 145 degrees 3280x3.0 mm Back gauge: 10-1550 mm Colour: grey/yellow Dimensions: 4220 x 2220 x 1850 mm Weight: 4400 kg Machine Number: 270203/32/4 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out

sheet width: 4000 mmplate thickness: 2,5 mmdistance between columns: 4060 mmControl: total power requirement: 3 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working lenght 2040 mm Max material thickness 5 mm

sheet width: 3200 mmplate thickness: 4 mmdistance between columns: mmpressure: tchamfer lenght: mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max bending length: 3200 mm Max sheet thickness: 4 mm steel Weight: approx. 5800 kg Mwauag Motor-controlled rear stop with folding cams up to 1500 mm Motorized bending cheek adjustment Multibend 9000 Control Segmented upper cheek tool with automatic tool clamping (height 150 mm)

sheet width: 3200 mmplate thickness: 3,00 mmdistance between columns: mmmax. height of upper beam: 300 mmtotal power requirement: 4,5 kWweight of the machine ca.: 4,40 tdimensions of the machine ca.: 4,30 x 2,30 x 1,75 mFurnishing• System 5000 control• CNC - controlled back gauge 10-1500mm• Automatic upper and lower tool clamping• Automatic bending beam adjustment• Bombing• Technical documentsTools:• Bending rail 25mm (s = 3mm), segmented• Sharpening rail (8 pieces each 400mm, 7 of which are new and unused)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel bending machine RAS 67.30 HR Steel Plant Construction Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

SAY-MAK SWIVEL BENDING MACHINE TYPE SCM-H 2060 - Capaciteit e 2060 x 1.2 mm - Max buighoek 135 ° DUTCHMACH Bhbyyphejo Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border) Request more information

large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg

Description: Fabrication number 4460plate width: 2,000 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 600 x 1,300 mm

sheet width: 2000 mmplate thickness: 2 mmdistance between columns: 2100 mmtotal power requirement: 6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,7x1,2x1,1 mVoltage 380Vbelt width max. 2000 mmsheet thickness 2 mmDimensions (LxWxH) approx. 2700x1200x1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 1,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mBending angle adjustable via potentiometerStopover of the upper beamSegmented upper beam railManual backgauge up to 750 mmoperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2,500 mm Max. sheet thickness: 1.5 mm steel Bending angle adjustable via potentiometer Stopover of the upper shore Segmented upper beam splint Manual backgauge up to 750 mm Operating instructions Approx. 1,600 kg

working length: 3000 mmplate thickness at ST 45: 1,25 mmplate thickness at Alu ALMG3: 1,75 weight: ca. 1900 kgdimensions: 3760 x 610 x 1060 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3000 x 2 mm segmented (high) upper tools controlled backgauge

sheet width: 1020 mmplate thickness: 3,00 mmdistance between columns: mmstroke: 120 mmtotal power requirement: kWweight of the machine ca.: 1,010 tdimensions of the machine ca.: 1,97 x 1,20 x 1,20 m• Sharpening rail• Bending rails 10 mm, 25 mm• Goats foot splint H 50 mm, length 745 mm. segmented• Manual backgauge• POS 400 control• Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: max. 1500 mmplate thickness: 2,5 mmserial number: 150393 weight: 1300 kg: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4020 mmplate thickness: 1,50 mmdistance between columns: mmstroke of upper beam: 250 mmcheek lowering: Oberwange 250 mm angle adjustable from - to: 0-180 Gradtotal power requirement: kWweight of the machine ca.: 4,86 tdimensions of the machine ca.: 5,185 x 1,220 x 1,425 m- Control POS 400 NC- Piece counter- foot switch- Rail quick clamping system- manual backgauge- 1x set split goat tool set- 1 pc. sharp rail- 2 pcs. bending splints- hydraulic upper tool clampingOptional - manual back gauge 750 mm without support table (new from SCHRÖDER) - if you are interested, please contact usThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 2,5 mmdistance between columns: 3200 mmControl: POS 800 total power requirement: 6 kWweight of the machine ca.: 4 tdimensions of the machine ca.: B3550x H1550x L2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Sheet width 3020 mm , Sheet thickness 3.0 mm , Bending angle max. 135° Stroke of the upper beam 250 mm Adjustment UW 80.0 mm , Back gauge – adjustable approx. 1,000 mm Working height approx. 975 mm , POS 900 control , Total power requirement 6.0 kW SCHRÖDER POS 900 CNC control unit with LCD display electro-motorized back gauge, with sheet metal support surfaceplate thickness: 3 mm, bending angle max.: 135 °, stroke of upper beam: 250 mm, total power requirement: 6 kW, weight approx.: 3,350 kg, Approx. Onsite Dimension. (l x w x h): 4,185 x 1,650 x 1,425 mm

sheet width: 3020 mmplate thickness: 2,0 mmdistance between columns: 3000 mmControl: POS 500 NC stroke: 250 mm: max. 135 °adjustment: UW 80 mmback stop - adjustable: 1000 mmwork height max.: 975 mmtotal power requirement: 6,0 kWweight of the machine ca.: 3,35 tdimensions of the machine ca.: 4185 x 1650 x 1425 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm

offer 22685 Specifications: - working width 3200 mm - material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically preselectable 0 - 150 ° - largest opening width / stroke of the upper cheek 400 mm -Mot. Height adjustment of the bending cheek - Top cheek drive 400 V / 4 kW - Bending cheek drive 400 V / 2 x 3 kW - Pneumatic connection 6 bar - with : - Control SCHRÖDER POS 2000 -Mot. Bending cheek height adjustment -Mot. Backgauge AFP 40 from 10 to 1000 mm -one. Crowning - Honeysuckle tool shared -Operating instructions - Space requirement with backgauge approx. W 5000 x H 2200 x D 2400 mm - Weight approx. 7500 kg

large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm

sheet width: 2050 mmplate thickness: 8 mmdistance between columns: mmelectrical: . weight of the machine ca.: 6,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 3 mmdaylight opening: 250 mmdistance between columns: 2050 mmwork height max.: 900 mm: max. 160 Gradtotal power requirement: kWweight of the machine ca.: 1,8 trange L-W-H: 3,0 x 1,4 x 1,6 mEquipment:- Bending angle preselection- Footswitch- Rear stop max. 550mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 3 mmdistance between columns: 2200 mmwork height max.: 920 mm: 250 mm: max. 180 °weight of the machine ca.: 2200 kgdimensions of the machine ca.: 3200 x 1700 x 1600 mmFurnishing:- Manual backgauge, 500 mm- ELGO control type 89- Set of toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 2,00 mmdistance between columns: mmstroke: 250 mmbending beam adjustment: 80 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,35 x 2,50 x 1,60 m• CNC-controlled backgauge 1000mm• NC control Midomat 2000• Bending rail: 20mm• 45 ° sharp railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Swivel Bending Machine Manufacturer: STÜCKMANN und HILLEN Model: 3402 Year of construction: 1980 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 2.0 mm Drive type: manual Remark: max. opening height 280 mm, Segment tool at the top Weight: 630 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Offer 23316 Specifications: - Max. working width 1540 mm - max material thickness at 40 kg / mm², strength 2.5 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 100 mm - the lower beam 100 mm - Upper beam drive 400 V / 0.75 kW - Bending beam drive 400 V / 1.5 kW - Accessories - separate control cabinet with control panel - Back gauge with stop depth up to 500 mm - Space requirement with back gauge W 2350 x H 1450 x D 1250 mm - Space requirement control cabinet W 600 x H 850 x D 500 mm - Weight approx. 1800 kg

TORO SWIVEL BENDING MACHINE TYPE ESF 1020 B -Capaciteit 1020 x 2 mm -Boven-en ondermes in segments -Maximum buighoek 138 ° -Voetklemming -Weight 280 kg DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TTMC SCHWENKBIEGEMASCHINE TYP PBB 1020/3SH -Capaciteit 1020 x 2 mm -Ondermes in segments -Onderbalk in segments -Maximum buighoek 150 º -Voetklemming Vsp9ya DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Gr. Working width: 1020 mm, for sheets up to: 1 mm back stop: 200 mm weight: 250 kg space requirement: 1420 x 650 x 1160 mm

Key data: 1020 mm, 3 mm

Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg

Machine description • Machine body designed as torsion-stiff steel welded construction with high static and dynamic stiffness of the welding assemblies • Drive of the upper and bending cheeks on both sides via controlled high-performance drive motors with worm gears • Force initiation of the bending cheek on both sides via tooth segments • Adjustment of the lower cheek mechanically • Adjustment of the bending cheek lowering electromotor • Tool set consisting of: • Clamping rail for upper cheek pointed rail mechanically • Oberwangenspitzschiene • Lower cheek rail with finger grooves • 2 bending rails • Rear stop with 10 stop fingers integrated in support table, max. stop size 1000 mm • Color similar to RAL 7038 / 5010 • Machine in good condition / little used / regularly serviced Working width (useful length) 3020 mm Wo ...

Usable length 2,000 mm Max. sheet thickness for mild steel 2.5 mm Opening width of the upper beam 250 mm Drive power of the bending beam 5.5 kW

Inv. Num. : 7070 Type: 6000/2 Producer: ZAKO Created: 2007 Parameters: Maximum bending length: 6000 mm Maximum sheet thickness when cutting: 2 mm Max. depth: 1000 mm Equipment: CNC control including touch panel Automatic Stops

Key data: 2000 , 2

Hydraulic swivel bending machine Year of construction 1978 Power 2.000mm x 2,5mm Engine 2,2KW Weight approx. 2,8to Technically good condition Condition according to photos. Machine ready for demonstration under power.