exposure used for sale

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Exposure device "degra uv copy 699" Exposure format: 40 x 50 cm Vacuum For nyloprint and offset plates Very good condition if invoiced in Germany + 19 % VAT

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Plate Exposure , Top Condition

complete thermal plate recording system: Thermal Plate Recorder SCREEN Platerite PTR 8200 E installed 3/2008 maximum plate size 1060x820mm (W1+) minimum plate size 450x370mm thickness 0,15-0,30mm speed 11 plates/hour Running Time 8040h Actual running time 4635h Exposure time 3373h Plate cycles 54343 Currently error is displayed during machine start-up Plate Processor Raptor Thermal 85 GLUNZ & JENSEN for plates up to 85cm wide production date 3/2007 installed 3/2008 Epson Stylus Pro 4880 17" 8-colours production date 11/2007 installed 3/2008 Location: poland Package price: on request

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

Heidelberg Suprasetter S 74 year 2007 2 heads 19 pph plate count 41.380 plates exposure time 1,440 h Debris Removal System 4 x PC MetaShooter RIP MetaDimension plate processor G&J MP 85

Hercules Elite with online development G+J ML 860; good condition; cleaned and checked; with HQ RIP.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Unused spare parts for Duritan lighting field Panacol-Elosol 3 UV tubes 2 chokes 1 Starter Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".

4 up Violet CTP Heidelberg Prosetter 74 2006 year 670 750 mm 16 plates/hr Violet laser 2400.2540.3386 dpi Developer Raptor PRO 68P Rip princet Metadimension 5.0 Heidelberg PrinceMkit Project Signa St.1.0 Pitstop Prifesional 6.1 Location: Poland Available: now Price: on request

platewriter Manufacturer: glunz&jensen Model: ICTP 2400 Pc + rip included year: 2010 Availability: in 2 weeks Defects: no Price: on request

4 up Violet CTP Fuji Model: Luxel V4-Man 100 M Built: 2010 Inlcude RIP+ Software Include Glunz & Jensen processor (built 2010) Price: on request

16 diots HQ rip

CTP-Mitsubishi - DPX 460 – Plate platesetter with Rip-Mate PC Year of construction: ca. 2007 incl. software and accessories incl. originally packaged role films For the production of ready-to-print stamped polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x stock rolls 1x integrated register punch for PM52 autoplate

CTP Platesetter Fuji Luxel V6 E; State as is; Development machine Amber 85; Printing plate stackers. CTP system Fuji Luxel V6 E; condition as is; processor Amber 85; plate stacker.

Year 2015 Model: 010405/VLF Flatbed Imagesetter Size max. 205 cm x 151 cm Count of plates: 121269 12 plates/h Located Germany In production Available: March 2023

Imagesetter Linotype Hell - used Type: Quasar 4570 - Year of construction: August 1995 - fully functional - can also be used as a spare parts dispenser - High precision laser imsetter - film width: 530 mm - speed: 1320mm /h - Material thickness: 0.10 mm - Voltage: 100 - 240 V - Machine No.: 53310... - Frequency: 50 - 60 Hz - Weight: approx. 300 kg - Dimensions (length/width/height): 750 x 1200 x 1100 mm - Price on request

64 laser diodes 405 nm, maximum plate format 2080 x 1600 mm, minimum plate format 655 x 410 mm, manual plate feeding, Machine dimensions L 4126 x W 1794 x H 2008 mm, weight 3500 kg fully functional, good condition, immediately available, Price on request, Delivery and installation worldwide on request

- Plate size: 724 x 838 mm - MCU (3 Cassettes) GTO / SM 52 / SM 74 - Chemical free used - Stacker - without inline punch - without RIP / Workstation - 50.500 plate exposures

Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.

CTP Heidelberg Suprasetter A52/A74, Year 2006 approx: 9 K Plates done RIP Prinect Meta Dimension Available: at short term

Year 2007 model:A52/A74 Incl. plate processor Incl. stacker Located Germany Available: immediately

Year 2008 Model:A52/A74 Incl. plate processor Incl. PC + RIP Software Located Germany Available: immediately

Year 2006 Plate size max.: 830 x 630 mm Plate thickness: 0.15 to 0.3 mm Incl. plate processor Incl. PC + RIP Software Screen Dainippon PT-R4300E Located Germany Available: immediately

I sell my combination of sieve platesetter and sieve drying oven with 4 compartments. The machine is also suitable for large screens. Technical equipment: - Compact system with spot light copy lamp - Light dosing device with photocell and UV intensity measurement, UV filter and program memory - Vacuum copy frame for all types of stencils with quick-release fastener and highly flexible blanket - Automatic operation and display of vacuum time, switching and venting - UV-resistant sun protection curtain - Copy unit with 2000 / 5000 W; Connected load 380 V 50 Hz - Screen drying oven in the base with 4 compartments for dust-free storage Drying of the stencils. The stencils are pushed in. - Warm air blower - Can be dismantled for transport - Copy frame inner dimension 140 x 170 cm Dimensions: Height: approx. 188 cm (up to the top edge of the curtain rod; machine only: 97 cm); ...

2011 Platesetter 181690 plates 2395 hours F-speed with XPO TDL –Series 1700 2,400 to 2,540 dpi 20 plates/h 1-Bit Tiff files Punching integrated for 3b and GTO Single cartridge autoloader for 100 plates Kodak PRO Stacker 105/80 SN: 93507-1802 2 plate trolleys In production Available: immediately Located: Germany

System includes (1) Jet High-Performance Platesetter Krause, year of manufacture: 2007 (2) Polymer Printing Plate Processor Krause 650 Bluefin, year of construction: 2006 (3) Polymer Printing Plate Processor Krause Bluefin XS 650, year of construction: 2012 (4) Platesetter Krause LS-PERFOMANCE CTP, year of construction: 2006 (5) Register Punching and Folding System NELA VPC 463, year of construction: 2002 (6) Register Punching and Folding System NELA VCPeco, year of construction: 2016.

- Installed 03-2008 - RIP program Trueflow 3 with 1 bit tif - Exposure hours from the laser 3.052 ( Total 51285 plates ) - Semi-automatic plate feed with the help of the plate loading table - Large and multi-format output – from 4 pages to 32 pages - 2 x inline Punch Bacher 2000 ( double exposure two Plates simultaneous and punching ) - 14 plates/hour 2,032 x 1,270 mm - 17 plates/hour 1,524 x 1,143 mm - 30 plates/hour: 1,030 x 800 mm (exposure of two Plates simultaneous ) - Innovative 512-channel GLV exposure head enables high-speed exposure of large-format plates or two side-by-side mounted panels Plates up to the size of 1,160 x1,270 mm. - Resolution: 1200 / 2400 / 2438 / 2540 dpi - - with GLUNZ & JENSEN Quartz III 150 plate developer - with forklift

Biosan chamber The chamber was purchased in 2017, efficient, not used. The UVC/T-M-AR is a chamber designed for clean work with DNA samples. The chamber provides protection against contamination. The UVC/T-M-AR model is a table-top model, made of a metal frame and a stainless steel work surface. The chamber is equipped with an open UV lamp installed in the upper part of the chamber. UV radiation from an open lamp disinfects the working surface by deactivating DNA / RNA fragments within 15-30 minutes of exposure. A digital timer controls the exposure time. The white light lamp provides proper illumination of the work surface. The chamber is equipped with a flow UV antibacterial lamp, which ensures continuous decontamination inside the chamber during operation. This lamp is recommended for working with DNA/RNA amplicons. The UV recirculator contains a lamp, a fan and dust filter ...

Espec Temperature Shock Chamber Here we offer you an Espec temperature shock chamber. Thermal shock environmental chamber (cold load: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large, since three separate chambers are used. The TSA series has only one chamber, which significantly reduces its size. Instead, it circulates cold, hot or ambient air as needed. The air-conditioned air can be pre-cooled or preheated beyond the setpoint, allowing for faster recovery of the desired state after transmission. Espec Temperature Shock Chamber Water Cooled TSA-201S SN: 153000154 Hot chamber: +60 to 200°C Cold chamber: -70 to 0°C Working temperature: 0-40°C System: Two zones or three zones test by flap switching Achievement: Test area: High temperature. Exposure range: +60 to +200°C Low temperature. Exposure range: –70 to 0°C Temperature fluctu ...

8-up Thermal CTP Heidelberg Topsetter 102 Year: 2000 Exposure time: 22097h Plate winding cycles: 46324 Diodes in very good condition Plate size max: 940x1160 mm Plate size min: 650 x 550 mm Exposure resolution: Full HD 4k Speed: 50 plates/h Power consumption: 200/230V 7.5A 50/60Hz Price: on request

Digital silver halide polyester Exposure system Internal drum Material: 2 magazines (can be upgraded) Material definition: Up to 16 Tape definition: Up to 16 Capacity of material: Up to 61m / 200 ft per roll. Plate thickness: 4 mil / 0.1 mm - 8 mil / 0.2 mm Plate size: 454 x 525 mm 3600 dpi: 14 plates per hour 2540 dpi: 17 plates per hour 1800 dpi: 24 plates per hour 0900 dpi: 29 plates per hour With HQ-RIP workflow

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center  ...

White plastic crosslock with swivel base This plastic cross barrier with rotatable base is very light and therefore ideal for shutting off a well or a construction site quickly and safely, for example. This plastic anti-kink wall has a reflective strip (type RA1/A red white) on one side, which makes the fence particularly visible on the road or on the construction site, for example. Because the weighted base (recycled plastic) can be rotated, the fences can be neatly stacked on top of each other, making storage 53% more efficient than traditional fences. The squeeze barrier is equipped with hooks and eyes, so you can easily connect them together. Length: 2,00m Height: 1.00m Weight: 13 KG Plastic barriers offer several advantages over traditional steel barriers or barrier tapes when creating a barrier. Here are some of those benefits: 1. Weight: Plastic combat barriers are ...

spare parts - cook bolinders - Cutter hood in steel execution Fraeshaube steel-exposure old glue system Plate 4.1C, No.

4 up Thermal CTP Heidelberg Topsetter P74 Year of production: 2003 (first installed in May 2004) Bridge between CTP and developer Developer Agfa Azura C95, year of production: 2015 Automatic stacker for plates Computer with SignaStation Computer with RIP MetaDimension Actual Running Time: 7609h Exposure Time: 4536h Plate winding cycles: 115454 Price on request

cutting range for steel to: 35,0 Trennschnitt mm cutting range for steel to: 25,0 Qualitätsschnitt mm capacity at 100%: 61,0 Ampere cutting medium: Druckluft output: von 20 - 65 Ampere output: Eingang 7,8 KW voltage: 400 V range L-W-H: 595 x 250 x 890 mm weight: 24,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent  ...

8 up Thermal CTP Avalon N16–50 XT Punch system Bacher 780 Avalon N16 May 2012 Life time plates 343123 p Lifetime running 24921 h Actual running time 13276 h Exposure time 5885 h LD Status Reserve (U) 77 Current (U) 25 Reserve (L) 67 Current (L) 25 GLV replaced in may 2022 Price: on request

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

Manufacturer: Heidelberg Model: Topsetter 102 Modules: -Topsetter P/PF 102 MCL -Multi Cassette Loader P/PF 102 -Topsetter P/PF 102 Recorder -Transporttable advand MDT 48C -InterPlater 135 HD/HDN/Thermal Exposure time/ runnung time: 34936 hours Plate winding cycles: 76313 Price: on request

Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1450 laser hours for sale., Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connection / consumption: 400 Volt 3NPE, 32 A, 50/60Hz, 6 KW/h, exposure speed: 15 m / s, Shielding gas consumption in the process: Ar/N2, 2,5l/min, Flood shielding gas consumption: Ar/N2, 1700l/min, mass: Approx. 1000KG Approx. 1000KG, Build chamber in mm  ...

OPG MyRay Hyperion X5 3D DVT Air Wall Model Orthopantomograph Panoramic X-ray Machine Item: digital 2D/3D panoramic X-ray machine, wall model Type: MyRay Hyperion X5 3D Air manufacturer: Cefla SC, Italy Year of construction: 07/2016 Properties: - Complete examination of the two dental arches in single scan for adults and children (reduced collimation). examinations of the jaw area with maxillary sinuses; local investigations of the region concerned - High-resolution CBCT examination (80 pm) with possible single scan of the complete dentition (FOV 10x10) or scanning of various limited sections (MultiFOV) for reduced exposure in the area to be examined - short wall column - 3 light sights, autofocus (automatic adjustment of the dose to the patient) - A single 3D/2D QuickScan sensor - MRI (Morphology Recognition Technology) - 2D Focus-Free - Up to 22 2D programs - Stable ...

Screen PlateRite PT-R 8200 E Niagara year 2007 max. plate size 1060 x 820 mm min. plate size 450 x 370 mm thickness 0.15 - 0.30 mm speed 11 plates/hour Exposure time 3380 h plate cycles 54400 HQ-Multi RIP 10.0 year 2014 G&J Raptor Thermal 85 plate processor

HB SS A75 Gen III (52 & 74 - SOFTWARE LICENSE FOR BOTH FORMATS) Ser No.: PJ0001726 Plate format (mm): from 240 x 240 mm up to 670 x 760 mm Plate thickness (mm): 0.15 - 0.30 mm Resolution: 2400 dpi or 2540 dpi1 Material counter: 88182.25 m2 Plate counter: 208806 pcs Exposure counter: 208598 pcs Total material used: 97354.27 m2 Total of all plates: 230309 pcs Total of all exposures 230133 pcs Equipment / Additional information: with integrated plate punch with washout station Glunz & Jensen washout station 85 HDX Plate stacker, advand PST 48 Prinect MetaShooter Automation DTL Dual Top Loader Suction device The machine has 1 laser head with 64 diodes Disassembly, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg. Condition: very good condition / total serviced