ex cell o used for sale

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

SUPERCRITICAL CO2 EXTRACTOR Model: EXTRAKTLAB 140 Refurbished in 2021 (to brand new equivalent condition) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2,5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance - UL 508A electrical panel Electrical - 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions - 99" ...

Tubular heat exchanger mounted skid allowing to thermoregulate (heat, cool, maintain) a heat transfer fluid via a secondary circuit with 3 entries. Very often associated with a filter dryer or reactor when there is an issue / risk of product contact. Primary circuit : Heat transfer fluid loop Volume: 3.5L Pressure: +6 bars T?C = 150?C Secondary circuit : Number of inlets: 3, with one loop dedicated to steam Volume: 14.5L Pressure: -1/+6 bars T?C = 150?C Steel extension vessel Pump 15 m3/h Year 2006

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

COVEX 60 SINGLE LAYER LDPE EXTRUDER HEAD 220 CROWN TREATMENT INCLUDED TOWER INCLUDED

IBAÑEZ EXTRUDER SPINDLE DIAMETER 45 120 HEAD CROWN TREATMENT EQUIPMENT INCLUDED MICROPERFORATING ROLLER TOWER INCLUDED

Blow molding machine for sale, fully functional. Manufacturer Extraplast Machinen GmbH Year 2008 Engine power 80kW Heating power 49kW Max. hydraulic pressure 250bar Max air pressure 10bar Working pressure 330 bar Form clamping 450 x 850mm Price negotiable - make an offer

Profile Width (Max): 235 mm // Output Capacity: 100 kg/h

Manufacturer: Explosion geschützte Leuchten, Type: Jung Leiuchten, FREETEXT1: 2 Stück , FREETEXT2: 32 cm breit 86 cm lang/Einbautiefe 13 cm, FREETEXT3: geeignet für Spritzraum,

workpiece diameter:38 mm workpiece length:500 mm rack milling length - max.:610 mm profile width:92 mm module range:0,3-1,3 slide stroke:760 mm drive motor: kW electrics - voltage/frequency:380/50 V/Hz total power requirement:52 kW weight of the machine ca.:10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Scania Austausch-Motor Typ= DI12-54A-PDE-Steuerung 242KW Aldrehzahlmotor incl.Anlasser,Lichtmaschine.Auch für Pflanzenölbetrieb geeignet. info@miw-zeven.de

with 2 Fotzellen for autom. Umreifen, frame format 1000 H x 600 mms of B, roller race powered 55-cm height of the ground, 4 steel roles at the entrance 4 roles at the exit, for PP tape format 12x0,63-0,65 mmRollenkern 200 mms / 280 mmBand tensions 100-700 N380V, 50 hertz

Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet Year of manufacture: 2009 Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg Power consumption: 7,0 kW Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe : Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009 Capacity 3, 8 l / min Design pressure: 4000 bar Motor power: 37kW Weight: 1450kg Single table, work room (cutting edge) dimensions: Length = 2200 mm; Width = 1300 mm; Height = 200 mm Special features: · Programmatically, motorized adjustment of the head distance. No tedious, manual adjustment necessary. Minimization of set-up time and avoid errors · Machine designed for high workpieces (up to 200 mm). Ideal for the cutting of foam materials. · Ergonomic software: simple and very fast creating of cutting programs, tak ...

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet year: 2009 Characteristics: Single table with dimensions:Laenge = 6500mm; Width = 3300mm; Height = 1850mmWeight: 1500kg Power consumption: 7.0 kW Cutting head count: 2 Manufacturer: AllfiType: V High Speed high pressure pump :Manufacturer: UhdeType: HP19/37-SYear of construction: 2009 Foerderpower 3.8l/min Design pressure: 4000bar Engine power: 37kW weight: 1450kg ready to use

Various shredders to fit on EXTEC screening machines (e.g. 5000 S, Turbo, Turbotrac, S-series)

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

a hydraulic four-column press Exner, type H4 SP 450, Y.O.M. 1983, pressure 450 to., side windows 475 mm. Installation height 600 mm, table area 1100 x 850 mm, impact area 300 mm, stroke 200 mm. Dimensions 3100mm x 2100 mm, depth 1,980 mm. Weight 13 to. ]

Name: Sludge pump Material: Normal steel Engine drive: 7.5 kW Max operating temperature: 20 °C Dimensions: L 3200 mm x W 500 mm x H 500 mm Kerb weight: approx. 350 kg Speed: 15 -50 rpm Capacity: 0.4 - 2 m3/h Max operating pressure: 6 -8 bar Operating voltage: 400 V Protection: IP 55 Tech. Documentation: Yes in german available

Material: Normal steel Engine drive: 18.5 kW Dimensions: L 2000 mm x W 550 mm x H 1000 mm Kerb weight: approx. 300 kg Dimensions: L 2000 mm x W 550 mm x H 1000 mm Speed: 261 rpm Capacity: approx. 45 m3/h Operating voltage: 400 V Tech. Documentation: No Condition: Used Tech. Documentation: No Accessories: Conveying pressure 2 bar

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

Weighing cabin / weighing unit for product and personal protection. GMP compliant clean room system with air circulation system. The laminar flow area is generously dimensioned. This unit is in EX version and as good as new. All rooms are controlled and monitored by Siemens technology

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table load: / t weight: 1100 kg table height: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Expert Eda450 Size of table plate: 450 mm weight of the machine ca.: 380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Curved rotary indexing table make EXPERT type E 19/0030/4Masch. -No: 4806 with 4 stations, advantage: The 4 stations will beapproached precisely and softly. The schedule can not be changedbecome. You can run the table all around, but it stopsalways briefly at the 4 stations,Turntable diameter: 1350 mmTable height: 820 mmInner bore: 90 mmMax. Load: 1 tOuter diameter: 1500 mmWith- ball bearing slewing ring- Index drive- without motorvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 60 t throat: 330 mm stroke: 500 mm table surface area: 640x640 mm ram surface: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EXNER EXSBR 200 hydraulic press YOM 8/1987 Serial No. 10042 Pressure 200 t Table 1800 x 800 mm Power requirement 65 kW Safety distance 195 mm Overtravel 52 mm Run-on time 120 ms Weight ca. 23 t

Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph

- Load capacity: 27 kg - Machine weight: 100 kg - Space requirement (W x D x H): 1.1 x 0.25 x 0.5 / 0.6 x 0.5 x 0.67 m - Condition: very good Details Gripper for tools or other parts. The part weight can be adjusted for lifting/lowering. Functions: Lifting/Lowering, Gripping, Swivelling Gripper holder 0.42 x 0.5 m Accessories no other accessories

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

Used labeling machine made by Exelsior Karvina s.r.o. (Czech Republic)

pressure: 20 t throat: 185 mm stroke: 100 mm table surface area: 380 x 350 mm dayligth: 250 mm table height over floor: 840 mm total power requirement: 4 kW weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weighing range 10 to 2000 g Calibration weight 1000 g Output: up to 60 to 70 cycles per minute

Filling machine at 2000bph running in sequences of 12 products. Manufactured in 2016. Runs on 380V. Conveyor belt operated. Sold as is in the pictures together with spare parts remaining. At request, a short video of the machine running can be provided.

This Excetek V650G Erosion machine was made in 2016 in Taiwan. The machine has a wire diameter of 0.15~0.3 mm.

This EXERON 316 XXL Erosion machine was manufactured in the year 2013.

This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.