emergency used for sale

sheet width: 1350 mm plate thickness: 5 mm cutting angle: 2,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,93 x 2,2 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal milling machine / horizontal bed milling machineMake VEB HECKERT type FBEW 630x2000Fabr. -No: 353514, built in 1977Technical specifications:Table size: 2000 x 650 mmTable width: 750 mmMachining length X: 2000 mmMachining length Z: 800 mmConnected load: 24 kWExternal dimensions L x W x H: 5300 x 2250 x 2530 mmControl cabinet: 1000 x 850 x 1800 mmWeight approx: 7.5 twith- retractable quill- separate control cabinet- rapid traverse- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 47,3 t dimensions of the machine ca.: 6,8 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 10 mm pre-bending: 8 mn number of rolls: 4 Walzen diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,45 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 4 mm pre-bending: 3,5 mm diameter of upper rolls: 120 mm total power requirement: 2,2 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2500 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Pipe expanding machine Fabr. IBP Pedrazzoli Fabr. Stern Brown 65Year 1984Pressure force: 16 tMax. Pipe size: 300 x 1.9 mmWorking speed: 60 mm / sec.Return speed: 110 mm / sec.Max. Mandrel stroke: 190 mmDrive power: 15 hpPower connection: 380 V / 50 HzExternal dimensions L x W x H: 1800 x 1200 x 1500 mmWith- 10 sets of tools 160 - 300 mm- separate control cabinet with controlsxa0xa0xa0 On / off, vise open / close, head back / forth,xa0xa0xa0 Pause / Emergency- FootswitchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 2050 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 2,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm pre-bending: 3 mm number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6 m/min total power requirement: 3,3 kW weight of the machine ca.: 2,47 t dimensions of the machine ca.: 3350 x 1200 x 1210 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 2570 mm plate thickness: 30 mm pre-bending: 25 mm diameter of upper rolls: 420 mm roll diam. bottom roll: 400 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 19,04 t dimensions of the machine ca.: 5,25 x 2,3 x 2,35 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 16 mm pre-bending: 13 mm diameter of upper rolls: 320 mm roll diam. bottom roll: 300 mm speed: 1,15 - 5 m/min total power requirement: 22 KW weight of the machine ca.: 11,0 t dimensions of the machine ca.: 5,15 x 2,0 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 4 mm pre-bending: 3 mn number of rolls: 4 Walzen diameter of upper rolls: 200 mm roll diam. bottom roll: 180 mm speed: 6,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 4,85 t dimensions of the machine ca.: 4,9 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 1050 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 1,35 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 20 mm pre-bending: 16 mn number of rolls: 4 Walzen diameter of upper rolls: 350 mm roll diam. bottom roll: 260 mm speed: 1,5 - 5 m/min total power requirement: 23,5 kW weight of the machine ca.: 13,3 t dimensions of the machine ca.: 5,45 x 1,95 x 2,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...

bore capacity in steel: 40 mm threading cutting capacity:: M30 throat: 310 mm bore stroke: 175 mm spindle taper: MK 4 feed range - spindle: 20 - 400 mm/U spindle turning speed range: 60 - 1250 / 120 -2500 U/min transmission ratio: 2 Stufen column diameter: 120 mm table surface area: 550 x 400 mm total power requirement: 1,5 / 3,0 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...

Vertical band saw and band filing machine make JAESPA type AS 4Fabr. -No: 735401, built in 1973Technical specifications:Roll diameter: 420 mmCutting height under guidance: 450 mmCutting width: 400 mmBelt speed: 16 - 1600 m / minSaw band length: 3200 - 3400 mmTable size: 660 x 660 mmTable load: 350 kgSaw motor: 2.2 kWGrinding motorExternal dimensions L x W x H: 660 x 900 x 1920 mmWeight: 690 kgwith- Band saw welding machine BSO-16- grindstone- tiltable table- Attack- lighting- Emergency stop switchused, from a company liquidation,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mm bore capacity in cast iron (diameter): 70 mm threading cutting capacity:: M50 throat: 420 mm bore stroke: 260 mm spindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 64 - 1210 U/min transmission ratio: 12 Stufen column diameter: 220 mm table surface area: 600 x 600 mm total power requirement: 4 kW weight of the machine ca.: 0,82 t dimensions of the machine ca.: 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adj ...

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Lathe machine make ELEKTRA BECKUM type HDM 1000Machine -No: 1000-85 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 160 mmlargest turning diameter: 320 mmSpindle thread: M 20 x 1.54 spindle speeds: 700 - 2200 rpm.Quill taper: MK 3Quill stroke: 50 mmPower connection: 0.55 kW / 220 V.External dimensions approx .: 1300 x 700 x 1200 mmwith- Three-jaw lathe chuck diameter 100 mm- Emergency stop switch- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 1270 mm plate thickness: 2,5 mm roll length: 1270 mm roll diam. toproll: 90,0 mm engine output: 1,1 kW bending speed: 6,0 m/min weight: 520 kg Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 160 - 2250 U/min engine output: 1,45/1,90 kW column diameter: 115 mm weight: 285 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for E ...

bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 80 - 1.125 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely variable speed setting by ...

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...

weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 50,0 mm bore capacity in cast iron: 60,0 mm bore stroke: 230 mm thread dia.: bis M 36 M table surface area: 550 x 550 mm throat: 400 mm turning speeds: 54 - 1032 U/min morse taper: MK 4 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width: 30 mm column diameter: 200 mm engine output: 4,0 kW weight: 720 kg range L-W-H: 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 60,0 mm bore capacity in cast iron: 70,0 mm bore stroke: 260 mm table surface area: 600 x 600 mm thread dia.: bis M 42 M throat: 420 mm turning speeds: 64 - 1210 U/min morse taper: MK 5 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter: 220 mm T - slots - width: 30 mm engine output: 5,5 kW weight: 820 kg range L-W-H: 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely variable speed setting b ...

Briggs & Stratton Emergency Generator 20 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 896 cm³ - - - - - Generator - Power: 19.5 / 17.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 39.1 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 90 x 58 x 89 cm - Weight: 160 kg - - - - - Price and payment - 3650,- € + 19 % VAT = 4343,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oil ...

weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spindle feed with feed ove ...

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available in two versions - single-phase and three-phase The construction is made entirely of stainless steel AISI -304 construction Easy operation process. A safety system where the belt stops working in an emergency. ON – OFF switch on a button Security system when opening the door Easy cleaning with water pressure CE certified machine Supplied with a set of strips, and on order, strips for frozen and chilled meat are supplied. Technical data: Wheel diameter 200 mm. Motor power 0.75 kW, 230 /400V, three-phase Equipped with a special plate for adjusting the thickness of the pieces and a piston Tape length: 1,600 mm. Machine weight 57 kg.

Manufacturer: Medoc The machine is made of sturdy 18/10 stainless steel construction; Suitable for working in harsh conditions; Floor model; Automatic preset control to fix the work bar; The model has a fixed top, as an option it is offered – with a removable top; Model for right-handed operation; Equipped with a special plate for adjusting the thickness of the pieces and a piston; Easy cleaning with pressurized water. Belt width: 2500 mm.; diameter – 300 mm.; Security system where the tape stops at the 4th second. ON – OFF activation of a button in the event of an emergency Design with smooth surfaces, where the machine is easy and quick to clean. Certified machine meeting CE norms. Technical data: Wheel diameter: 300 mm. Motor power: 3 HP, 230 / 400V, three-phase Tape length: 2,500 mm. Machine dimensions: 325 / 745 /1670 m ...

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this  ...

sheet width: 3100 mm plate thickness: 6 mm thickness at Niro-steel: 4,5 mm daylight upper clamping: 100 mm Bending angle: 0 - 135 ° total power requirement: 7,5 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 4,5 x 1,72 x 2 m Electric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mm Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.