drilling press used for sale

number of spindles: 3 bore capacity in steel (diameter): 40 mm bore stroke: 180 mm weight of the machine ca.: 2,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 340 mm bore stroke: 180 mm tool taper: MK 4 turning speed range - stepless: 45 - 1400 U/min feed stepless: 0,04 - 0,35 mm/U motor speeds:: 3 table-size: 500 x 500 mm weight of the machine ca.: 900 kg dimensions of the machine ca.: 1000 x 500 x 1950 mm inkl. working light function not tested The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

bore capacity in steel (diameter): 60 mm throat: 420 mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m Drilling Ø, steel or cast iron 60 mm Boring Ø with pre-bore ½ 100 mm Table Ø 600 mm Distance between spindle and column 420 mm Spindle taper MK5 12 spindle speeds 120 - 800 rpm Quill stroke 270 mm Mounting height above rotary table 800 mm Mounting height above base plate 1,400 mm 8 drilling feeds 0.13 - 1.8 rpm Spindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 Hz Weight approx. 2,600 kg Accessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

spindle diameter: 105 mm x-travel: 1250 mm y-travel: 1000 mm z-travel: 600 mm table length: 1100 mm table width: 900 mm tool adaptor: 50 ISO / MK total power requirement: kW weight of the machine ca.: t CNC Table Borer, Reconditioned 2002, BOSCH CC 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9600 mm Thickness: 450 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² The floor plate and the table are optional and will be charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1100 mm z-travel: 950 mm Table load: 3000 kg table surface area: 1000x1120 mm turning speeds: 16-1250 U/min spindle taper ISO: 50 Control: Heidenhain total power requirement: kW weight of the machine ca.: 13,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 255 mm bore stroke: 110 mm spindle speed:: 80 - 3490 U / min table-size: 400 x 400 mm spindle taper MT: 4 turning speed range:: 2 x 12 Stufen column diameter: 88 mm base plate: 600 x 370 mm total power requirement: 1,1 kW weight of the machine ca.: 155 kg dimensions of the machine ca.: 1,15 x 0,65 x 0,32 m Topline type heavy duty column drilling machine. For easy, frequent use. The drill chuck cover is made of high quality polycarbonate, and complies with the latest safety standards. It is equipped with an autostop switch. Separate emergency stop can be reached easily. Fitted out with a cooling table, softgrips,, adjustable depth stop and quick-acting drill chuck. The machine is equipped with a thermal cut-out. quick-acting drill chuck 1- 16 mm engraved nonius machine stops when drill chuck cover is opened depth stop autostop switch when o ...

work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...

bore capacity in steel (diameter): 30 mm x-travel: 914 mm y-travel: 406 mm z-travel: 406 mm table-size: 1270 x 274 mm spindle speed:: 60 - 4200 U/min. spindle taper ISO: 40 head swivability: 2 x 90 ° distance spindle /table: 150 - 550 mm spindle diameter: 86 mm bore depth: 127 mm spindle feeds:: 0,04, 0,08, 0,15 mm/U total power requirement: 2,2 kW weight of the machine ca.: 1280 t dimensions of the machine ca.: 1750 x 1700 x 2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 455 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 400 V total power requirement: 0,75 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm solid column to avoid vibration gear wheels in oil bat left and right turning precision setting for milling depth with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 445 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 230 V total power requirement: 1,1 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm ?solid column to avoid vibration ?gear wheels in oil bath ?left and right turning ?precision setting for milling depth ?with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...

bore capacity in steel (diameter): 32 mm throat: 250 mm bore stroke: 120 mm spindle taper MT: 3 spindle speed:: 120 - 3480 U/min column diameter: 92 mm distance spindle /table: 595 mm voltage: 400 V weight: kg : 120 total power requirement: 1,1 kW dimensions of the machine ca.: 575 x 450 x 1730 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

bore capacity in steel (diameter): 16 mm throat: - mm bore stroke: - mm spindle taper: MT2 spindle turning speed range: 400 - 4000 U/min Table dimensions: 365 x 455 mm base plate: 530 x 365 mm voltage: 400 V column diameter: 75 mm total power requirement: 0,75 kW weight of the machine ca.: 130 t dimensions of the machine ca.: m Heavy duty v-belt driven column drilling machine with variable speed. table and head height adjustable swivelling head flexible LED light quick-acting drill chuck 3-16 mm (B16) t slots high speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0i-MC Technical data Number of drill spindles: 1 Max. drill depth: 1200 mm Drill capacity in steel: from diameter: 3 mm up to diameter: 32 mm Table length: 1200 mm Table width: 1000 mm Max. loading: 5000 kg Travels: X axis: 1000 mm Y axis: 800 mm Z axis: 1200 mm W axis: 400 mm Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Power: 34 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 7000 mm Width: 4500 mm Height: 3200 mm

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: IXION Technical data Number of drill spindles: 1 from diameter: 3 mm up to diameter: 25 mm Table length: 1375 mm Table width: 700 mm Max. loading: 2000 kg Travels: X axis: 1000 mm Y axis: 800 mm Z axis: 1000 mm Spindle speeds: stepless from: 100 rpm up to: 4000 rpm Spindle nose SK: 40 Power: 7.5 kW Machine´s weight about: 8000 kg Overall dimensions machine: Length: 6600 mm Width: 4000 mm Height: 2300 mm Various accessories: Coolant system Chip conveyor

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill spindles: 2 Drill capacity in steel: from diameter: 15 mm Centre height: 200 mm Table length: 700 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Spindle speeds: number (steps): 9 from: 1500 rpm up to: 12600 rpm Voltage 50 Hz 3x: 380 Volt Power: 3.2 kW Overall dimensions machine: Length: 3000 mm Width: 1600 mm Height: 1800 mm Various accessories: Loader

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: GE MARK CENTURY ONE PLUS Technical data number of tools Drill capacity in steel: 23 mm Spindle speeds :steps: 9 from: 42 rpm up to: 3500 rpm Table length: 820 mm Table width: 400 mm Longitudinal travel: 400 mm Transversal travel: 320 mm Vertical travel: 470 mm Feeds: 1000 mm/min Rapid traverse:: 3.5 m/min Voltage 50 Hz 3x: 380 Volt Power: 2.5 kW

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

1 Milling machine CB Ferrari S70

Milling machine DECKEL MAHO DMG 125

Dowel drill Schleicher Type Partner 27/2 Specifications: • Year of construction: 1991 • Working width (mm): 900 • Number of drilling spindles: 27 • Pitch (mm): 32 • Drilling unit: swivelling • Motor power (kW): 1.9 • Space requirement L x W x H (mm): 1120 x 900 x 1150 • Weight (kg): 550

ID3208 Unimog 405/12 year/Year of construction 2000 10360 hours/hours – 71.100 km Unimog with Nordmeyer DSB 2/6 drilling rig, auger pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drilling cable winch 19 kN, power flushing head 7 kNm, crushing device 11 kNm, cable impact device (cable pulling force 30 kN, drilling load 5 kN, stroke 400 mm) Unimog with Nordmeyer DSB 2/6 drilling rig, screw pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drill cable winch 19 kN, power rinsing head 7 kNm, crushing device 11 kNm, rope impact device (rope pulling force 30 kN, drilling load 5 kN, stroke 400 mm)

Column drilling machine IXION - MAXION type Unimax 3 Fabr. No. 201516 Year of manufacture 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 260 mm Pinol stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 volts, 50 Hz spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for right-hand and anti-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table Height adjustment via hand crank - Quick-action drill chuck RÖHM 1 - 16 mm - Emergency stop button Space requirements L x W x H 800 x 530 x 1800 mm Weight 230 kg very good condition; used

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

This Kaltenbach KBS 1010 DG drilling and cutting profile machine was built in the year 2009. Efficient drilling, milling, marking, tapping and countersinking. It comes with a tool changer, 5 total per axis for shorter setup times.

This ERLO TH-40 (2017) Drilling machine was manufactured in the year 2017 in Spain and has 4080 production hours. It is equipped with a Mitsubishi M700V/M70v Series contoller (Spindle speed: 750 - 4000rpm).

This CHETO 3000 Drilling machine was made in 2014 and has 9700 production hours. The machine has a spindle speed of 6000 rpm.

This FICEP 3003/12 GDD CNC automatic drilling lines for welded beams and welded structures was made in the year 2016 in Italy. The machine has a spindle speed of 5000 rpm and 6 axis.

Drilling capacity: 0 mm Number of drilling units: 0   Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 2 Drill capacity: 10 mm Table length: 1040 mm Table width: 350 mm Spindle speeds: number (steps): 10 from: 660 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 1150 mm Width: 550 mm Height: 1700 mm Various accessories: Drill chuck: 0.5 - 10 mm Adjustable depth stop

Specifications: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0.1 ; 0,2 ; 0.3 mm/U - Projection 290 mm - max distance table - drilling spindle 620 mm - Rotary table with 2 T-slots 450 mm - Height adjustable via rack and pinion with hand crank - Coolant device - Drive 380 V / 0.9 / 1.3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 6 mm Table length: 310 mm Table width: 280 mm Depth of throat: 150 mm Spindle stroke: 50 mm Spindle speeds: number (steps): 8 from: 650 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.30 HP Machine´s weight about: 50 kg Overall dimensions machine: Length: 600 mm Width: 350 mm Height: 650 mm Various accessories: Drill chuck: 0 - 6.5 mm Lamp

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill spindles: 1 Max. drill depth: 1250 mm Drill capacity in steel: from diameter: 15 mm up to diameter: 63 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 3500 mm Width: 2000 mm Height: 1900 mm Various accessories: Coolant system Set of drills Set of drill heads Tool cabinet Magnetic chip conveyor Status light

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: ELAU PT1 Technical data Max. drill depth: 600 mm Drill capacity in steel: up to diameter: 18 mm Spindle stroke: 600 mm Table length: 1375 mm Table width: 700 mm rotatable: 360 ° Max. loading: 2000 kg Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Spindle speeds: up to: 4000 rpm Spindle nose SK: 40 Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.3 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 4500 mm Width: 1800 mm Height: 2700 mm Various accessories: Drill chuck with internal cooling Digital readout number of axis:: 2 Coolant system

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 18 mm Table length: 430 mm Table width: 340 mm Depth of throat: 225 mm Spindle stroke: 110 mm Spindle speeds: stepless from: 132 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.45/1.1 kW Machine´s weight about: 650 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1950 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ELESTA