dmc 60 used for sale

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: DMC, Type: Masterbrush S 1350 DBB, Year: 2017, Number of units: 2+1, Working widht mm: 1350, Through running hight max mm: 3-200 mm, Diameter of brushes: 300 mm, Through running hight max mm: 3-200 mm, Feeding speed continous adjustable: 2-16 m/min, Year :2016

SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER DMC MOD. UNISAND 2000-I M3 - CE RULES - bottom machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - top machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - working widht mm. 1350 mm. - control panel - vacuum - s/n SA/004163 - year 2000

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm B-axis (table): 360 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea

Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool

Description: Max. machining width 1350 mm Min. machining thickness 4 mm Max. machining thickness 200 mm Forward feed belt , with speed adjustment by NC Motor power 4 KW Fan for belt vacuum hold down , no. fans 1 Operating units 5 OPERATING UNITS 1 Unit : sander unit : band OPERATING UNITS 2 Unit : roller unit : in rubber roller diameter : 320 mm motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 3 Unit : pad Pad : vertical Segmented pad : , With superfinishing belt , with adjustable speed by NC , motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 4 Unit : brush unit : top brush diameter : 200 OPERATING UNITS 5 Unit : blowers Control system HYDRA PC Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: serial number: SA/004186 Technical specifications: sanding width approx. 1350 mm workpiece thickness from 4 mm up to 170 mm vacuum transport belt, vacuum unit power 7,5 kW belt conveyor with variable feed speed: 3,5-18 m/min feed motor power 2,2 kW aggregate 1: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 2: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 3: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 4: antista ...

Description: • Varnish Wide belt sanding machine • Serial number SA/003641 • Total installed power approx. 23 KW • Sanding width 1100 mm • Workpiece thickness up to approx. 170 mm • Motorized height positioning with digital reader • Vacuum transport belt, F.LLI FERRARI vacuum unit with motor power 4 KW • Feed motor power 1.50 KW • Aggregate 1: grooved rubber sanding roller, with blowers • Aggregate 2: sanding pad, with blowers • Both groups are driven by an 15 KW motor Approx. Onsite Dimension. (l x w x h): 2,000 x 1,850 x 2,450 mm, weight approx.: 2,300 kg

Description: • Wide belt sanding machine • Serial number SA/003937 • Sanding width approx. 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Dimensions for ...

article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8

Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator

DMC Deckel Maho 50H Horizontal Machining Center Double Pallet/Pallet changer Control Unit: Siemens 840D X: 560 mm Y: 510 mm Z: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor

Magazine flap, flap for magazine DMG MORI DMC 63H 2298933 187470 860936 Material: Lacquered steel New ! Dimensions (original box): 1160 x 750 x 300 mm

Medical sterilizer For decontamination of various materials, including liquids in sealed bottles. It is built between two rooms in one wall. Cabinet and through execution. The internal dimensions of the camera are 672 x 672 x 600 (W x H x D). The volume of the camera is 300 liters. The software combination L 3203 is designed to sterilize dishes, textiles, rubber plugs, filters and liquids in closed or ventilated rigid containers. All processes in this combination are designed to retain and disinfect wastewater from the sterilizer. The parameters for each process can be adjusted and stored in memory for the respective program. Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit. Russified display. Avanti control panel (8.4 color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - o ...

Cat. No. 11-3600-8 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 600 litres Height on the ground: 1485 mm Height on the top: 1200 mm Total height: 2685 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Packing unit PMN Type BSM 600 + LPM 600,max item H 300 x W 600 mm.

Linear actuator REXROTH LA 25 HUB 600 ( LA25HUB600 ) 7900304779 Hub: 600 0 mm carriage: 124 x 85 x 85 mm hole spacing 1: 70 / 170 mm, hole spacing 2: 70 / 105 mm all threaded hole: M6 x 1,0, Depth: 15 mm Track: 64 x 54 mm, Length: 780 mm used, tested ! Dimensions: 900 x 85 x 120 mm

Linear guide REXROTH LF 85 L HUB 600 ( LF85LHUB600 ) 7900301623 stroke: 6 00 mm carriage: 225 x 85 x 85 mm hole spacing 1: 70 / 170 mm, hole spacing 2: 70 / 205 mm all threaded hole: M6 x 1,0, Depth: 15 mm Track: 64 x 54 mm, length: 880 mm used, tested ! Dimensions: 885 x 85 x 85 mm

Server cabinet, control cabinet PAGUS Centrotherm 600 x 600 x 2100 mm 2 doors and wheels Dimensions: 600 x 810 x 2250 mm

Belt cylinder with position sensors FESTO DBP-32-600-PPV-AB stroke 600 mm piston diameter Ø 32 mm Dimensions: 880 x 72 x 55 mm

Cabinet PAGUS 600 x 600 x 2125 mm Inside dimensions: 560 x 580 x 2080 mm (width x depth x height) 4x shelf: 560 x 580 mm (height adjustable) door: 585 x 2110 mm with window: 380 x 1280 mm lockable, 1x key ! used, checked ! Dimensions: 600 x 660 x 2140 mm

Linear actuator, with shock absorber FESTO DGP-50-600-PPV-A-B 161783 stroke: 600 mm piston diameter: Ø 50 Slide: 205 x 24 mm pmax: 8 bar 2x Shock Absorber: YSR-16-20-C ( 34573 ) used, checked! Dimensions: 950 x 125 x 123 mm

Linear actuator FESTO DGC-K-25-600-PPV-A-GK 1312501 stroke: 600 mm piston diameter: Ø 25 mm Carriage: 105 x 19 mm pmax: 8 bar New ! Dimensions: 800 x 45 x 63 mm

Linear actuator, special cylinder FESTO DGO-25-600-PPV-A-B 11917068 stroke: 600 mm piston diameter: Ø 25 mm rod diameter: Ø 26,5 mm rod thread: 2x M22 x 1.5, length: 15 mm slide: 15 x 50 x 50 mm pmax: 7 bar New ! Dimensions: 845 x 50 x 50 mm

Ventilation grille PAGUS 600 x 600 mm large box: 420 x 420 x 30 mm frame ( outside ): 335 x 335 mm frame ( inside ): 255 x 255 mm mesh size: 20 mm round opening: Ø 300 / 250 mm Material: Stainless steel New ! Dimensions: 600 x 600 x 60 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 600 x 600 mm height: 140 mm used, tested ! Dimensions: 600 x 600 x 140 mm

Welding table, training welding table PAGUS Working surface: 600 x 600 mm Working height: 800 mm Working area divided into two bar iron grates Rod spacing: 50 mm used, tested ! Dimensions: 600 x 600 x 800 mm

Filter Platte für Seitz Orion Filter 600x600 - S1 Anfangsplatte More then 300 machines new and second hand on our seema .de

Filter plate 600 x 600, stainless steel, end-plate S2 More then 300 machines new and second hand on our seema .de

Filter housing of stainless steel for plates 600 x 600, with manual hydraulic. Size for 80 plates. 78 plates on stock. Plates maximum: 80 Plate formats: 600x600 Platefilter features: Manual spindl More then 300 machines new and second hand on our seema .de

Filterplate 600x600 stainless steel Material: AISI 304 13mm complete with screws 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763 More then 300 machines new and second hand on our seema .de

fitting to Orion filters, without seals material:PP plastic, food-safe   More then 300 machines new and second hand on our seema .de

Filter frame without plates - sold separately under: https://www.seema.de/de/products/2827 Plates maximum: 100 Plate formats: 600x600 dimension ca. 330x100x150 cm Distance between first plate and spindle approx ca. 180cm More then 300 machines new and second hand on our seema .de

including 36 plastic plates and 2 end plates of stainless steel dimension ca. 260x90x160 cm Distance between first plate and spindle approx ca. 120cm More then 300 machines new and second hand on our seema .de

Compact cylinders, pneumatic cylinders, double-acting FESTO DZH-32-600-PPV-A 14040 piston diameter: Ø 32 mm stroke: 600 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar used, tested ! Dimensions: 750 x 35 x 75 mm

Material WNr. 1.4301,AISI 304 (V2A),without seals More then 300 machines new and second hand on our seema .de

Technische Daten: - Schnittlänge max. 6200 mm - Schnittbreite max. 600 mm - Schnitthöhe max. 160 mm - Sägeblattdurchmesser 550 mm - Sägeblattbohrung 30 mm - Motorleistung Säge 11 kW - Getriebemotor für Vorschub mit Inverter 1,1 kW - Motor Breitenverstellung 1,1 kW - Gesamtleistung 13,20 kW - Spannung 400 V, 50 Hz - Sägeblatt-Vorschubgeschwindigkeit stufenlos 0 - 80 m/min. - Sägeblatt-Rücklaufgeschwindigkeit 80 m/min. - Druckluftanschluss 6 bar - Absaugstutzen 2 x 130 mm, 1 x 200 mm - verschiebbares Bedienpult an der Bedienseite - gummiertes Fusspedal für Start- und Vorschubregulierung des Sägewagens - Display mit Tastern zur Einstellung der Schnittgeschwindigkeit - Absaugbalken mit integriertem Lamellenschutz - elektrische Breitenverstellung mit Kugelumlaufspindel und 2 Geschwindigkeiten - inklusive HM-Sägeblatt 550 x 30 x 4,5 mm Z 44 - 3 Positionen für Höhenverstellung Sä ...

Technische Daten: -Schnittbreite 600 mm -Schnitthöhe 435 mm -Sägebandlänge 4590 mm -Schnittgeschwindigkeit 1560 m/min -Tischabmessung 610 x 700 mm , mit 2 Tischnuten -Tischhöhe 910 mm -Sägetischneigung 0 - 45C -Absaugstutzendurchmesser 100 mm -Motorleistung 4 kW -Spannung 400 V -Abmessungen L=1125, B=800, H=2130 mm -Gewicht 350 kg komplett mit: -gummierte und präzisionsgelagerte Gussspeichenlaufräder ermöglichen geräuscharmen Betrieb -Paralelanschlag mit Schnellklemmung -Maßskala am Anschlag und Lupe zum genauen Ablesen und Einstellen -Schnitthöhenverstellung einfach und schnell über Handrad-Zahnstangenkombination einstellbar -Sägebandbreite von 6 mm bis 40 mm -schrägverstellung Tisch von 0C-45C über verzahnte Führung -Anschlußmöglichkeiten für Absaugung FI 100 mm Lieferumfang: -Gehrungsanschlag -Längsanschlag mit Feineinstellung -Sägeband

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

Technische Daten: - 6 Aggregate - Arbeitsbreite min./max. 300 - 2500 mm - Arbeitshöhe min./max. 10 - 120 mm - Vorschub stufenlos regelbar 6 - 36 m/min - Motor Vorschub 4,0 kW - Motor Breitenverstellung 0,75 kW - Gesamtanschluss 41,0 kW - Spannung 400 V / 50 Hz - Absaugstutzen FI 6 x 120 mm - PLC + touch screen Steuerung - Transportkette mit Nocken, Abstand 500 mm - Einlauflänge 1500 mm für Paneele / Dielung / Möbelplatten / Türen Vorritzsäge: - Motor 3,0 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 160 - 200 mm Ablängsäge:(Zerspaner) - Motor 7,5 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 200 - 300 mm Frässpindel: - Motor 7,5 kW - Drehzahl 7500 Upm. - Frässpindelaufnahme FI 40 mm - Werkzeug FI min./max. 108 - 180 mm - schwenkbar +60C bis -30C - Abmessungen L=4850, B=4380, H=1820 mm - Gewicht 5800 kg

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...