dividing head used for sale

Rye bread divider. Weight range per piece: 0,4-1,2 kg; Capacity: 10-30 pcs/min ; Large hopper for 300 L; With 3000 mm conveyor and tin sensor; The divider is new. Client refused because of small amounts of dough.

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) Center height: 105 mm Dividing head: Mount: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diameter: 75 mm 3x threaded hole: M10 x 1.5, Depth: 20 mm -15° - +105° tiltable spindle bore: Ø 24 mm Base: 105 x 195 mm tailstock with quill and fixed grain tip Tool holder: MK2 quill stroke: 35 mm quill: +/- 5° tiltable foot: 70 x 142 mm used, checked! Dimensions ( dividing head ): 480 x 450 x 260 mm Dimensions (tailstock) ): 220 x 70 x 115 mm

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Center height: 105 mm Dividing head: Receptacle: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable spindle bore: Ø 22 mm Base: 155 x 215 mm tailstock with quill and fixed grain tip Tool holder: MK3 quill stroke: 40 mm quill: +/- 5° tiltable foot: 100 x 140 mm used, tested ! Dimensions ( dividing head ): 400 x 395 x 230 mm Dimensions (tailstock) ): 242 x 100 x 125 mm

Dividing head, dividing head, dividing table, with tailstock WMW Center height: 135 mm Dividing head: Mount: Three-jaw chuck DH 160 x 3 diameter: Ø 160 mm, bore Ø: 422 mm -10° - +100° tiltable spindle bore: Ø 48 mm Base: 220 x 300 mm tailstock with quill and fixed grain tip center height: +15 / -10 mm height adjustable quill stroke: 30 mm Base: 120 x 177 mm used, tested ! Dimensions ( dividing head ): 450 x 480 x 260 mm Dimensions ( tailstock ): 235 x 120 x 140 mm

Dividing head, dividing head, dividing table WMW Center height: 125 mm Dividing head: Mount: MK4 ( inside ) with external thread for locking nut, thread diameter: Ø 52 mm pitch: 5 mm, thread length: 20 mm -10° - +120° tiltable spindle bore: Ø 26 mm foot: 150 x 220 mm used, tested ! Dimensions: 410 x 370 x 240 mm

Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

Dividing head with three-jaw chuck WMW Ø 250 mm Motor 1: Type 1213WSM2.85.08 52 - 172 V DC, 26 A Motor 2: Type MA 14 F130 - 4A 0,37 kW 220 / 380 V 3AC Three-jaw chuck: hole diameter: Ø 80 mm, not continuous ! hole depth: 70 mm flange ( dividing head ): Ø 190 mm bolt circle diameter: Ø 160 mm 4x threaded hole: M16 x 2.0, depth: approx. 20 mm center height: 240 mm hole diameter ( dividing head ): Ø 120 mm, not continuous ! used, tested ! Dimensions ( without eyebolts ): 1000 x 800 x 425 mm

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: dividing head -with: hand crank -Dimensions: 390/400/H200 mm -Weight: 28 kg

Dividing head with centering point and lathe chuck, dividing head, dividing table AVIA type FNCb Center height 110 mm spindle bore: Ø 26 mm < -br /> -90° - +90° rotatable -10° - +10° tiltable Mounting foot: 255 x 200 mm Turning chuck with second set of jaws chuck diameter: Ø 125 mm used, tested ! Dimensions: 600 x 400 x 270 mm

Dividing head, dividing head, dividing table, with tailstock and fixed tip TOS Type DU 250AS Center height 135 mm Tool holder (spindle ): SK 40 360° rotatable -10° - +100° tiltable diameter (clamping plate): Ø 160 mm groove width: 12 / 24 mm groove depth: 20 mm New ! Dimensions: 650 x 460 x 280 mm

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinder -Recording: MK5 -Tip height: mm -swiveling/rotating/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg

Dividing head with three-jaw feed, swivel head WMW 1-250 TGL30-7108 Three-jaw chuck Ø 250 mm center height 200 mm pitch 24 used, tested ! Dimensions 430 x 300 x 330 mm

Dividing Head LOEWE - Round table: 360° - Round axis diameter: 400 mm - Space requirement (W x D x H): 0.7 x 0.6 x 0.2 m - Weight: 240 kg - Condition: good

Dividing head with 4 jaw chucks WMW TU 100 ( TU100 ) Ø 160 DH 160 x 4-III max 2500 rpm used, tested ! Dimensions 440 x 300 x 360 mm

Dividing head WMW TU 100 ( TU100 ) used, tested ! Dimensions 440 x 400 x 230 mm

Dividing head WMW Dimensions: 770 x 250 x 430 mm

Dividing head with 3 jaw chuck and with spare perforated disc PAGUS Ø 190 mm center height 140 mm dimensions 650 x 550 x 320 mm

Dividing head PAGUS Center height: 275 mm Pitch: 5 degrees Flange diameter: Ø 190 / 155 mm bolt circle diameter: Ø 172,5 mm hole diameter: Ø 11 mm bore: 33 mm Base: 335 x 285 mm, material thickness: 25 mm used, tested ! Dimensions: 390 x 380 x 450 mm

Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm

Dividing head with 3 jaw chuck and centering point PAGUS Ø 375 mm center height 500 mm pitch 24 with counter tip Heavy version, 530 KG Dimensions 900 x 660 x 900 mm

Dividing head with 3 jaw chucks PAGUS Ø 310 mm center height 260 mm pitch 360° hole diameter: Ø 100 mm Base: 456 x 152 mm used, tested ! Dimensions 900 x 660 x 900 mm

Dividing head with three-jaw chuck, electro-hydraulic MAZAK AJV25/405 Three-jaw chuck Ø 315 mm hole diameter: Ø 100 mm, not continuous ! hole depth: 140 mm turntable: Ø 280 mm groove width: 14 / 24 mm groove depth: 20 mm center height 200 mm pitch 360 used, tested ! Dimensions 630 x 530 x 420 mm

Dividing head WMW SK40 center height 100 mm tool mount: SK40 with collet chuck size 25 360° rotatable mount bracket: Ø 50 x 168 mm used, tested ! Dimensions: 390 x 290 x 340 mm

Dividing head WMW Ø 45 mm center height 100 mm tool mount: Tension collets Ø 45 mm 360° rotatable mount bracket: Ø 50 x 168 mm used, tested ! Dimensions: 330 x 300 x 360 mm

Description: dividing head Diameter 150 mm Height 80 mm Center height 105 mm Machine weight approx. 18 kg Space requirement approx. 300 x 80 x 200 m weight approx.: 18 kg, Approx. Onsite Dimension. (l x w x h): 300 x 80 x 200 mm

Description: dividing head Diameter 200mm Height 105mm Machine weight approx. 25 kg Space requirement approx. 400 x 280 x 150 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 400 x 280 x 150 mm

Reversible clamp, rotary table, dividing apparatus PEISELER type 20.0000 No. 715 Table diameter: 500 mm Index pitch: 24 (15 )Bore in the middle of the table: 63 mm- readable degree scaling on the rotary table - lever for brake and snap-in pin - 20 mm T- slots - rotatable by hand or drive via center pin Dimensions L x W x H: 650 x 580 x 320 mm Weight: 230 kg good condition ; used

Divider WMW Dimensions: 770 x 250 x 430 mm foot one side with crack

Partial head with 3-jaw chuck PAGUS Ø 200 mm rotatable, swivel and tilt swivel and swivel: 360° tiltable: 90° foot dimensions: 360 x 260 mm Dimensions: 360 x 260 x 370 mm

Divider PAGUS Ø 295 mm Center height: 220 mm Pitch: 4 Groove width: 14 / 24 mm Groove depth: 24 mm Bore: 40 / 50 mm Base: 360 x 300 mm used, tested ! Dimensions 390 x 360 x 480 mm

Description: Center height: approx. 110 mm Incl. three-jaw chuck Diameter: 120 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 220 mm, weight approx.: 60 kg

weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 500 x 210 x 270 mm

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price

Daub Model: DV10 bun divider / rounder Serial: 62 Daub semi automatic bun divider rounder For dividing and rounding rolls, 36 divisions at a time, 3 phase, 3 moulding plates

Dough tub trolley NEW TW 14 "for the perfect long-term guidance" with 14 dough trays and lids 9.8 litre tub (max. 6 kgdough) Lid for special dough guidance /air guide Stainless steel car mobile

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Cutting length max mm: 6000 Saw blade overstand mm: 115 Diameter saw blade mm: 430 Vorritzer: Yes Machine Control: Microprocessor - G Drive 2 D Total connection kW: 18 Weight Kg: 19,000 Loading and unloading system "Essedue" - Manipulators

Concier dough parting machine Type: B-84 A Dimensions: Length without strap: 116cm Length with band 236cm Width 80cm Height with funnel 162cm Height without funnel 111cm

Baguett - Dough divider JAC Paniform - Dough weight from 150g to 950g - automatic dough division and shaping - Easyflour allows the dough trough to be floured in a single flowing ergonomic movement - automatic locking of the lattice holder - Modular solution thanks to partial and mould grids - Space-saving - fast and efficient - Versatile use - 80 different grids are offered - up to 3000 dough pieces per hour are divided and shaped Connection 400V 1.5 kW, 16A-CEE plug Visit our large bakery machinery warehouse!

New machine 24-month warranty Benefits: + TOP value for money + robust hydraulic dough divider with rectangular stainless steel boiler frame + mobile machine + teflon-coated cutting & punching grille, easy to replace + food-safe plastic press segments + Stainless steel knife for splitting pieces of dough up to max. 19 kg dough insert, 20-piece division) + Artisan, traditional sharing and moulding of the dough possible + Punching grille: profiled POM plastic knife, food-safe, for excellent side closure of the dough + ideal for very soft doughs (baguettes, ciabatta, focaccia, root breads, corntip) + smooth and dust-proof motor + easy and quick to clean + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 2x Teflon grid (see PDF / grid catalogue) OR instead + 1x plastic grid (see PDF / grid catalogue) for dough-gentle punching ...

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

Dough divider for a tension and oil-free parting of the dough Model: Slim 1700 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel container with safety cover Power max. 1,100 pieces per hour Sub-range from 300 to 1700 gr. (depending on the type of dough) DGUV V3 tested Electronic variable speed and piece counter Weighing with manual weight adjustment Length of the treadmill 50 cm Stainless steel Machine mobile with brake Connection 400V, 1.6 kW, 16A-CEE plug New machine with 12 months warranty optional: - Output conveyor belt up to max height 1650 mm - Automatic flour spreader - Round-wire module - Funnel 90 kg - higher base Come in our big bakery machines sale!

Dough dividers for traditional handicraft products for exceptional bread/pastry quality " The Original " Robust dough divider for flexible use Press plate, cutting & punching grille easily replaceable Manual sharing and moulding of the dough Reinforced execution Ergonomic division from direct processing to long-term management Pull-out bracket for the dough part tub Device is space-saving and 4 inserts can be stored no power connection required, maintenance-free As standard with: 1 punching grid, 1 dough tray, 2 silicone bases Visit our great sales shop!

Vacuum dough divider, German Technik Capacity: 1.800-2.400 pcs/h. Dimensions: 1370/1780x650x1600mm Weight: 420kg Electrical power: 1.75kW

table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baguett - Dough divider JAC Tradiform - Dough weight from 150g to 950g (option 300-1900g) - 19 kg capacity (460 x 387 x 125 mm WxDxH) - Stainless steel version - Dough division and shaping - Easylock automatic snap-in of the grid holder - Modular solution thanks to partial and moulded grids - Space-saving - fast and efficient with Easy Clean - versatile use - 100 different grids are offered - Basic equipment 1 cutting grid - up to 900 dough pieces per hour are divided and 3000 shaped Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 772 x 924/1756 mm, WxDxH New machine with 12 months warranty

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...