cs used for sale

Magnetic coupling PSP POHONY ELS 16 24V CSN 02 6517 ( ? SN 02 6517 ) 4436022/123 Shaft diameter: Ø 45 mm Wavelength: 60 mm 1 groove, width: 14 mm 6Clutch discs control voltage: 24 V DC used, tested ! Dimensions: 160 x 160 x 60 mm

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Card slot: Bachmann CST 500 (K1) / DNT B 2636/04 -Busprint: Bachmann BUS 500/1 B 6661/00 -Power supply: Bachmann DNT 90 / UB 6811/00 -Output card: Bachmann CA 16 / P 2.5 SB 6147/00 2 pcs. -Input card: Bachmann CE 32 / 1S B 6144/00 -Processor card: Bachmann CC 11/4 B 6047/00 -Coupling card: Bachmann KOP 500 U / SB 6786/00 -Control card: Bachmann MF 600/1 B 3736/01 -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -An ...

Servo drive, control, converter, frequency converter, frequency converter, drive converter, compact converter, drive controller -Bosch Rexroth: Compact controller IndraDrive C -Type: HCS02.1E-W0028-A-03-NNNN -Control card: CSH01.1C-SE-EN2-NNN-NNN-S1-S-NN-FW -Dimensions: 455/310/H115 mm -Weight: 4.8 kg

Single spindle lathe 1) machine information Max machining diameter: 16 mm Maximum processing length: 200mm Motor power: 3.7 kW Spindle speed: 15,000 rpm Shaft C index: 0.001° Pickup spindle Max machining diameter: 16 mm Maximum processing length: 80mm Motor power: 1.1 kW Spindle speed: 10,000 rpm Shaft C index: 0.001° Power tools on vertical support Speed: 6,000 rpm Motor power: 0.4 kW Number of tools: 4 Tool system Turning tools: 5 Drilling tools (front): 4 Drilling tools (rear): 4 Tool holder, sleeves (diameter): 20 mm Tool holder, turning steels (shank section): 12 mm 2) bar loader information: minimag FMB 18 Material passage in the guide channel: from 2 to 13 (16) mm - (maximum diameter of the feed bar: 18 mm) Power requirement: 1.5 kW Maximum feeding force: 300 N (infinitely adjustable) Insertion speed: 0 to 300 mm/s (adjustable) Retur ...

Magnetic coupling PSP POHONY ELS 6,3 24V CSN 02 6519 ( ? SN026519 ) 345 - 147 shaft diameter: Ø 36 mm wavelength: 54 mm 5 clutch discs control voltage: 24 V DC used, tested ! Dimensions: 132 x 143 x 54 mm

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation in original (5 books) + scanned (PDF files) - a lot of spare parts - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - dry cycle strocke / min ...

Magnetic coupling PSP POHONY ELS 10 24V CSN 02 6517 ( ? SN026517 ) 328 - 204 shaft diameter: Ø 40 mm Wavelength: 56 mm 1 groove, width: 12 mm 5 clutch discs control voltage: 24 V DC used, tested ! Dimensions: 145 x 145 x 56 mm

Magnetic coupling PSP POHONY ELS 1.25 24V CSN 02 6517 ( ? SN026517 ) 4431013/63 shaft diameter: Ø 20 mm wavelength: 46 mm 1 groove, width: 6 mm number of clutch plates: 4 control voltage: 24 V DC used, tested ! Dimensions: 100 x 100 x 46 mm

Boku SK 240 AS CS spiral mixer completely overhauledDescriptionUsed Boku spiral mixer type SP 240 AS CS with digital control. With 2 boilers in stainless steel on trolley. The mixer is suitable for max. 240 kg of dough, or for max. 150 kg of flour. The machine has 2 speeds and 2 mixing time zones. Optionally, the machine can be equipped with a lifting tipper and with up to 4 boilers. Manufacturer: Boku Maschinenfabrik GmbH / DiosnaType: SK 240 AS CSequestrivity: completely overhauledMaterial: stainless steel spiralFor max. 240 kg of dough, or for max. 150 kg flourWith 2 timers automaticWith 2 gears slow and fastWith 2 stainless steel kettlesOptionally also with up to 4 boilersMachine is overhauled and repainted

Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...

-Model : Thermal platesetter KODAK CREO MAGNUS 400 -Autoloader with 3 cassettes -Year 2006, approx 60.000 plates done -Thermal developer Eurografica available -Stacker HU.Q Csg-86 C -RIP Creo Prinergy installed with computer and monitor -Plate size: max 685x762 mm -Plate size: min 300x228 mm -Resolution: up to 2540 dpi -Productivity: Up to 22 plates/hour -Available immediately , complete with all accessories -One electronic card burnt ( see photos ) – Laser head and all other parts without damages

C&S Crathern & Smith- rigid box machines 2 machines sets for bottom and cover in one production cycle 2 x automatic gluing machines: CSG-1 2 x thermoplastic quad stayer QA-200 2 x automatic vision box spotter CSV-1 year 1997

KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed

AGFA / Siemens X-ray recorder DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0 Vertical tripod Siemens Vertix T 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning  ...

AGFA / Siemens X-ray imaging workstation DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0_Bj. 2018 Vertical tripod Siemens Vertix T Fa. Siemens 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • T ...

One Way Glass Bottle Filling Line 50000 bph for Beer and CSD Complete, very good condition non-returnable glass bottle line from depalletizer to palletizer featuring Krones 110 over pressure filling valve Sensometic VP-VI filler with automatic pressure control system, Krones bottle inspectors and labelling machine, Kisters Combiline automatic case packing machine, SEN twin deck bottle pasteuriser, and Italian Ementi (Mecra’s sister company) depal and palletizing system. This line was commissioned in year 2019 with completely overhauled (ecomac) filling block, Sipac conveyors from year 2016, brand new Krones inspectors etc. This line has been filling beers in 20 different sizes of glass bottles from 300ml to 650ml but it can fill any CSD. Line is still in operation Manufacturers: Krones, Kisters, Mecra, Sipac, Ementi, SEN Commissioned: in year 2019 Products: Beer and CSD Cont ...

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 400 mm - filtering surface 1.206 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status reporti ...

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 500 mm - filtering surface 1.916 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr. 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status report ...

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 700 mm - filtering surface 3.807 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (80mm + 8mm), - Nr 1 discharge slide (under the valve), - Nr. 2 hydraulic pistons for lid opening, - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the vario ...

Z 18 | PREMIX BC YEAR: 1994 SPEED: 10.000 LT/H MODEL: 100 MANUALS AVAILABLE: YES PROCESSED PRODUCT: CSD SYSTEM CIP: YES

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 1.500 ltr/h. Inlet pressure: - 0,1 bar with a differential pressure of 1,7 bar gives an discharge pressure of 1,6 bar. Speed 445 - 585 rpm. Viscosity 120 - 10.000 cst., Type of Machine: Double Screw Pump, Stock Number: 1012, Capacity: 1,5 m3/h, Inlet pressure: - ...

Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 2.500 - 2.200 - 2.500 ltr/h. Inlet pressure: - 0,33 - - 0,2 - -0,06 bar with a differential pressure of 4,51 - 3,9 - 0,16 bar gives an discharge pressure of 4,18 - 3,7 - 0,1 bar. Speed 473 - 582 rpm. Viscosity 10.000 - 120 - 120 cst., Type of Machine: Double Scr ...

Used filling line for CSD and still drinks up to 4000 bph Bottles PET and Glass In the packaging industry versatility is key This filling line handles both PET and glass bottles This double compatibility allows for great flexibility in production adapting to different market needs Filling Capacity of the used filling line for CSD and still drinks The filling capacity varies according to the size of the bottles With 0 5 liter bottles the capacity reaches 4 000 units per hour For 1 0 liter bottles the capacity drops to 3 000 while for 1 5 liter bottles it stands at 2 500 This production scale adapts to different sizes of operations ensuring efficiency and flexibility Format Molds present in the used filling line for CSD and still drinks Format molds are a crucial element in these lines This line features three interchangeable molds for PET and glass covering the most common sizes of 0 5 1  ...

Used Complete PET Filling Line 2001 Looking for a complete PET filling line to increase your production capacity We have just what you need a used complete PET filling line from 2001 that can handle up to 18 000 bottles per hour Here are the details of the line Blowing machine Krones Contiform S 16 year of manufacturing 2002 with air recovery system including preform feeding system Air conveyor Sidel year of manufacturing 2001 Tribloc Sidel Alsim 100 140 20 with 100 rinsing stations 140 mechanical volumetric filling valves and 2 head Arol plastic screw capper year of manufacturing 2001 This also includes a cap feeding system by Meyer Mixer GEA year of manufacturing 2001 Complete bottle conveyor system GEBO including conveyor lubrication system Labelling machine Krones Contiroll to label OPP labels from the roll by hot glue year of manufacturing 2003 Shrink packer and heating tunnel Krone ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Used Complete Bottling Line Procomac 2000 1 Blow mouldingmachine Typ SIPA SF12 8 2002 2 Chillerfor SIPA machine 2002 3 Compressor Typ Kaeser 2002 includes Air receiver 1000 liter 16 bar Mikrofilter Carbonfilter Screw compressor CS121 12 bar Air receiver 1000 liter 45 bar Pre filter HP Compressor Booster N753 G HP Airdryer THP 142 48 Microfilter Carbonfilter 4 40m Airconveyor Typ Procomac 2002 5 Rinser Filler Capper24 24 6 Typ ProcomacMuvitec 2000 Capper also for sports cap incl 6 Labellingmachine Type Futura hotglue 2000 7 Bottleinspector Type Logis Controls 2000 8 Bottle transporter Krones speed controled 2000 9 Handle Applicator Twinpack 2000 10 Packingmachine Shrinktunnel Kettner 2001 11 Packing robot Profipac 2005 12 Wrappingmachine Robotec 2002 Formats 1 O 5 liter bottle height 220mm Diameter 66mm Label 215 x 70mm 2 1 5 liter bottle height 334 mm Diameter 95 mm Label 285 x 100mm [.. ...

Used Filling Monoblock Simonazzi Azzurra 120 48000 bph Used filling monoblock Simonazzi Azzurra 120 for glass bottles with maximum capacity up to 48 000 BPH current size 200ml Suitable for CSD products The used Simonazzi triblock glass is composed by Rinser 2002 SIG Simonazzi BLOKRINSER Filler 1987 Sarcmi Azzurra 120 24 update in 2002 Capper Krones Twist off 2011 Type of transfer Transfer star wheels Capper Brand Krones Twist Off Machine Pitch mm 110 mm Max container height 200 mm Used Filling Monoblock Simonazzi Azzurra condition now as it is or is possibly overhauled and guaranteed Warranty of the used Simonazzi triblock glass 6 months in case of revision option to be quoted separately Worktop height 1200 mm Pressure 7 Bar PLC Siemens Simatic HMI Siemens Simatic TP27 Complete of CIP Premix CO2 checker Used Filling triblock This used filling monoblock Simonazzi Azzurra 120 has an impres ...

New PET filling monoblock for CSD up to 10000 bph System Overview The Unibloc 40 40 10 model by UBL SRL is an integrated bottling system designed to operate with a maximum capacity of 10000 BPH Its architecture combines three main functions rinsing filling and closing in a single monobloc Rotary Rinse in the New filling monoblock for CSD The rinsing section includes 40 heads configured to process PET bottles The design allows for effective and rapid washing essential for maintaining hygiene standards Counterpressure Filling The filling module uses 40 isobaric valves to ensure uniform and precise filling The isobaric system is particularly advantageous for carbonated drinks such as soft drinks and sparkling water minimizing the loss of CO2 during filling Screw Closure The sealing section is equipped with 10 rotary heads for applying plastic screw caps This mechanism ensures reliable and c ...

Used complete isobaric Krones filling line up to 20000 bph Introduction Overview and Technical Specifications Initially the used isobaric Krones filling line with a capacity of 20 000 bottles per hour offers efficient bottling solutions Designed in 2014 it remarkably has accumulated about 14 000 hours of work on the filler This indicates its exceptional reliability and longevity Versatility and Bottle Options in the complete isobaric Krones filling line Furthermore this system handles a wide range of bottle volumes from 0 2 to 0 75 liters Additionally it provides options for different types of closures including 28 mm and 38 mm screw caps and crown corks Consequently this ensures flexibility in production The variety in labeling types such as neck front back paper or sleeve adds further versatility Compatibility with Various Products Moreover the line is compatible with a diverse range o ...

CTP KODAK MAGNUS 400 II PLATESETTER -Model : Thermal platesetter KODAK 400 II LDA -Year 2008, approx ONLY 22.000 plates done, One owner -Stacker HU.Q Csg-86 C Year 2008 -RIP Creo Prinergy 4.0 installed with computer and monitor, Preps 5.3 -Plate size: max 685x762 mm -Plate size: min 300x228 mm -Resolution: up to 2540 dpi -Productivity: Up to 22 plates/hour -Air compressor Ceccato included -Plate processor included -Available immediately- Must move , complete with all accessories

General SKU323N481 LocationBarneveld MakeBjornkjaer Maskinfabrik AS TypeELTS Flash 235/100 Year of construction2005 Pressure Working pressure9.3 Bar Working pressure vapour evaporator1 Bar Specified Features - Falling film evaporator Falling film evaporatorcheck Capacity± 60 kg/h Number of stages:3 Condenser:check MakeBjönkjaer Mach.No.67794 Year of construction2005 Tube capacity21 Ltr. (stage 1) Shell capacity700 Ltr. (stage 1) Capacity155 Ltr. (stage 2+3) MaterialStainless steel Information Mach.No.67794 Extra SpecificationsThe system also includes: - Centrifugalpump CSF Inox, Typ 32-210: capacity 3900 Ltr./h, motor: 1,1 kW 400 Volt: - Compressor :Bock, Typ HG6/1240-4: motor: 30,5 kW 400 Volt: - :Vacümpump :SPECK, Type V130: motor: 3,0 kW 400 Volt: - Gearpump Iwaki, Typ MDG-R15K220: capacity 500 Ltr./h, motor: 0,18 kW 400 Volt, - Centrifugalpump Iwaki, Typ ...

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wraps in foil, seals and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packets per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 cs1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm.  ...

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wrapped in foil, sealed and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packs per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 CS1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm. ...

We hereby offer this used TOS Sua 125 CNC lathe from 2011, located in Finland. Equipped with an advanced Fagor 8055 control unit, this machine ensures precise and efficient operations. With a substantial turning length of 1920 mm, it caters to a diverse range of metalworking tasks. The low-speed 630 rpm spindle, coupled with a robust 37 kW motor, guarantees powerful and accurate machining. Invest in this reliable CNC lathe to enhance your production processes, delivering exceptional results with every project. Technical specifications: Year: 2011 Made in: Czech Republic Control unit: Fagor 8055 Turning diameter: 1250 mm Turning length: 1920 mm Swing over carriage: 930 mm Distance between centers: 2000 mm Height above bed. 625 mm Cutting force: 10000 N Spindle speed: 4 - 630 rpm Spindle bore: 128 mm Spindle nose: ČSN ISO 702/II Motor power: 37 kW Dimensions: Length: 5 ...

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N.2 heads type T2 - Spindle power 7.5Kw - rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 - s/n AB004 - Complete with manual and CE declaration

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

Comments: with Control System but without Alternator. Previous owner had full CSA Contract with Inni Spain, 60k was not done Item Code: 1113332u Scope: Genset manufacturer: Jenbacher Engine Type: JMS Engine Serie: 620 Gas Type: Natural Gas Design No: E806 Eng Ser No: 1216621 Unit Ser No: 5578962 Orig PoOutput kWm: 3072 YoM: 2008 OH stop OP: 60000 powerup.at - Technology is our drive. Efficiency our focus.

1 of used canning line for 150-/200/250 ml slim cans. Most equipment new 2001, various other equipment later added. Main items are: depalletizer, empty can conveyors, twist-rinser, CSW lid feeder, Krones carbonator, Krones Volumetic 72-valve filler with Ferrum 8-head seamer, VBS nitrogen dosing system, Heuft level detector, SMB double-deck pasteurizer, aiirknives, KHS/Kisters shrinkpacker, KHS/Kisters trayshrinkpacker, palletizer and stretchwrapper. Originally supplied to fill beer, fruit juice (witih pulp) and soft-drinks including energy drinks. Available for immediate dismantling.

Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec-Studio software must be purchased through Artec. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up  ...

Can Filling Line for Beer and CSD, Automatic MITCAB 2000 cph – 2023 Complete can filling line with depalletizer equipped with 300ml can rinser, fully automatic filling block with an overpressure filler with 12 filling heads, one head can seamer and CO2 air pre-evacuation system built in filling nozzles, wraparound roll feed labelling machine for self-adhesive film labels with separate date coder, collecting table for manual packing of cans and intermediate can conveyors. The line is set up for 300ml standard and sleek cans and 500ml standard cans and designed for beer and carbonated soft drinks. Equipment was manufactured in 2023 and only tested, no commercial operation made. Technical Characteristics Producer MIDCAB Sweden Can sizes 330ml slim, 330ml standard, 500ml standard Capacity upto 1500 - 2000 cph Manufacturing year 2023 Operating hours Only tested, no commerci ...

Make: ABB Item: Procontic CS31 Model: ICSK20F1 Voltage: 220V/230V Condition: Pre-owned, Used, Good Reusable.

10pcs OMRON S8VS-12024AP / S8VS-18024AP Switching Power Supplies SWITCHED-MODE POWER SUPPLY for DIN rail mounting Specifications: Switching Power Supply - Switching Power Supply for DIN Rail Mounting - Supply Voltage 100... 240 VAC - Output: 120W / 24VDC (5A) - Display U, I, Imax ,Remaining Life - Undervoltage,Lifetime Alarm PNP - Approvals.CE ,UL,CSA

Three-phase electric motor EVIG BUDAPEST VZP 160 M4 ( VZP160M4 ) 11 kW 1440 rpm 220 / 380 V 3 AC 50 Hz IP44 design: B5 shaft diameter: Ø 42 mm wavelength: 110 mm groove width: 12 mm gear: Ø 86, width: 12 mm, teeth: 29 flange: Ø 230 / 300 mm bolt circle diameter: Ø 265 mm hole diameter: Ø 14.5 mm drive motor for e.g. radial drilling machine CSEPEL RFH75 used, tested ! Dimensions: 625 x 315 x 380 mm

Three-phase electric motor EVIG BUDAPEST VZP 100 Ln4 ( VZP100Ln4 ) 3 kW 1440 rpm 220 / 380 V 3AC 50 Hz IP44 Design: B5 shaft diameter: Ø 28 mm Wavelength: 60 mm Groove width: 8 mm gear: Ø 54, width: 19 mm, teeth: 19 flange: Ø 180 / 250 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 15.5 mm drive motor for e.g. radial drilling machine CSEPEL RFH75 used, tested ! Dimensions: 405 x 250 x 280 mm

General SKU394U1138 LocationBarneveld MakeGab Neumann TypeN-B-6,9-C No.25865-20250 Year of construction2007 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface6.6 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface6,6 m² Max. temperature-30/+180°C Shell capacity37 ltr Shell diameter650 mm Shell length800 mm Shell with expansion jointcheck Shell connectionsDN50 (2x) Cover connectionsDn200, DN50 MaterialGraphite Information Total height1,35 m Weight620 kg CEcheck Floorspace0,7x0,7 m Technical specs Extra informationVolume 29 ltr, allowable pressure -1/+6 bar, allowable temp -30/+80°CShell and tu ...

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW.  ...