counter used for sale

Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available

Heidelberg XL 105-6+LX2, Year: 2006 Counter: 209 mio Available: IMMID IMMDI., Condition is good, under Heidelberg full service, no damages and repairs., CP2000, Master level., Suction-tape feeder table, Antistatic feeder (Eltex), Double sheet detection - electronic, AutoPlate Advanced, CombiStar, Technotrans beta. c, water cooling, Ink temperature control, Alcolor Dampening System, Automatic Impression-cylinder washing device, Automatic Ink-roller washing device, Automatic Blanket washing device, Coating unit with chambered doctor blade system, CoatingStar - coating supply, Extended delivery, DryStar3000 Combination - IR and Hot Air, Non-stop Feeder and Delivery, CleanStar Compact, Powder sprayer AP500, AirStar Pro, water cooling, ScrollStar, Year: 2006 Counter

Bag-in-Box bottler GANDRA TEC 500 + : 3L / 5L / 10L / 20L 2 pcs available. Automatic. For automatic hot or cold bottling of fruit juices, vegetable juices, wines, etc. Supported packages: 3 l, 5 l, 10 l, 20 l. Bag insertion is done automatically from the belt or manually. Vacuum generation and nitrogen introduction after pouring are standard. Equipped with a filled bag counter and a liter counter. Retrieval of filled bags in the machines is done manually. Manufacturer: Gandra Model: TEC 500 + Year of production: 2017 Recently poured NFC apple juice Capacity: up to 500 bags of 3 liters per hour - Power supply 400 V/50Hz; 2 kW - Air pressure - 6 bar - Installed power - 1.5 kW

Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system

connection voltage: 230 Volt Speed: max. 3500 Takte/h Paper size max.: 230 x 356 mm Neopost DS-70 Folding capacity: up to 8 sheets Multiple feed up to 25 sheets ° Load `N go ° Preset counter ° Double sheet control of the feed trays ° Job selection ° Piece counter ° Capacity volume ° Up to 350 documents (80g/sqm) per tray and up to 325 envelopes ° Output values up to 3,500 envelopes per hour ° Single fold ° Wrap fold ° Double parallel fold ° Zigzag fold The Neopost DS-70 is designed for 40,000 envelopes per month. -Note: Machine indicates that service is due! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...

Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...

Specifications: first-class condition, only approx. 9000 operating hours Fanuc, High Performance CNC Control Series 31i-B5, 3-channel control, 3 revolvers, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Rod diameter max. 38 mm, Turning length max. 350 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) Turret drive power 4 kW Tool holder holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide Bushing Unit (Pull System, JBS) LTA Oil Mist Extractor Unit Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS  ...

max. wheel diameter: 1200 mm gear width: ca. 800 mm max. module: 25/35 Control: Simens 840 D PL workpiece diameter: 1200 mm Hobbing approx.: 25 mm tooth form milling approx.: 35 mm axial slide travel: 1000 mm table diameter: 1200 mm table bore diameter: 300 mm table load: 15000 kg total power requirement: 110 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 8,1 x 6,2 x 3,8 m Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P300L Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Counter spindle speed 50 – 6,000 rpm Recording: BMT 55 Travel: Z-axis 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: - Y-axis - 2 tool turrets with 16 places each (all seats driven) - One Touch IGF - Chip conveyor Mayfran type: CONSEP 2000 - Bar feeder Samsys Multi 3000 - Partial removal unit - Main spindle Hainbuch Spanntop nova CombiAxle hoist size 65 - Counter spindle Hainbuch Spanntop nova Axfix size 65 - additionally 1x lining Kitagawa BB 208 Ø200 passage 68mm - additionally 1x lining Kitagawa BB 208 Ø200 passage 52mm

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

ID3252 Doppstadt SM618 Profi year/Year of construction 2001 approx. 1011 hours acc. Counter/hours according to counter 15 t Drum sieve, with 3 sieves (15/20?/50 mm perforation) Drum sieve, with 3 sieves (15/20?/50 mm perforation)

Tornos EvoDECO 16/10 CNC sliding head lathe CNC control Fanuc 31i-B5 Number of axles 10 Diameter of the spindle bore 16 mm Standard workpiece length with rotatable guide bushing 180 mm Spindle speed 0 - 12,000 rpm Spindle motor 12 / 9.8 kW Spindle speed counter Spindle 0- 12,000 rpm Minimum indexing C-axis main spindle 0.001° Minimum indexing C-axis counter spindle 0.001° Number of tools on the guide bush 10 | 2x 5 Positions of the tools on the guide bush 6 | 2x 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools on the end device 4 Positions for rotating tools on end attachment 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools in secondary operation 6 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 1.5 / 2.2 kW Positions for Rotating Tools i ...

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

This DMG MORI GMX 200 Linear Lathe was manufactured in the year 2004 in Germany and has 23500 spindle hours. It is equipped with a SIEMENS 840D powerline control unit with an Ethernet interface. The machine disposes of a main drive counter spindle which has a speed range of 5000 rpm, a main spindle left and a turning/milling spindle which has a speed range of 12000 rpm, a couple of hydraulic three-jack chucks and cooling tank with cleaning with belt filter and a spray gun. It has a differential pressure for main spindle and for counter spindle.

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

Number of spindles: 3 St. Number of tools: 2/3 St. Spindle diameter: 40/50 mm 1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Pro ...

Key data: 45 mm

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Horizontal flow-wrapping machine Pearl Servo D6133 for packaging chocolates and chocolate bars Dataflex 6230; 32 mm (LH) incl. - TTO Ultra black - Print head cleaning kit - Rotary encoder kit - Counter pressure roller 750mm long - Shaft for counter pressure roller - Universal frame - Language Kit - Clarisoft Ergonomic design: HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. High speed and versatility: Up-to 160 cycles/min. with 2UP and capable of wrapping endless diffrent products in the food and non-food sectors. No mechanical drives: Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Compact design, easy cleaning: Thanks to the cantilevered construction and the use of polymer moulded components with graceful radiuses ...

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Manufacturer: KITA ...

The machine is in good technical condition, can be tested under power. FANUC O-TC control system Dogmth Maximum turning length: --- mm Spindle passage /max. bar diameter: 14/12 mm Number of spindles: 2 pcs Maximum power of main spindle: 2,2 kW Maximum main spindle speed: 12000 rpm Controlled axes: X; Z; C; Y; Knife plate: 5 tools 12x12 Axis tools: 3 pcs - 20 mm diameter chucks Counter spindle power: 0,4 kW Maximum counter spindle speed: 6000 rpm Lathe length: 1500 mm Lathe width: 980 mm Lathe height: 1560 mm Lathe weight: 1350 kg Accessories: bar feeder FMB for 3m bar oil cooling Technical documentation Functional, trouble-free, still in production. Small, very agile lathe. Including equipment - pliers, bushings, 12x12 knife holders, etc + rotary holder and fixed guide bushings holder.

Key data: 1500 mm, 510 mm, 510 mm

For sale: Dugard Eagle vertical machining center type Maxi-Mill 1500, equipped with a tanshing complete fourth axis with braked counter tip / Beautiful vertical machining center in good condition with an X, Y and Z axis displacement of 1,500 x 510 x 510 mm / The table size is 1570 x 500 mm. The table contains a complete fourth axis with braked counter center and a beam in between, on which you can clamp products on all 4 sides. The maximum speed is 6,000 rpm. The machine is also equipped with a Fanuc 0i-MC controller and a chip conveyor with left-hand ejection. Available at short notice, subject to prior sale.

OMSO DM385 Automatic machine for dry offset printing in upto 6-Colors over the entire surface of oval, square or rectangular Tubs plus 2 x Colors on the base of the Tubs. Print Roller self cleaning function when colors are changed. Tub stacks fed by an automatic Elevator Tray Feeder. UV Curing Tunnel, for the 4 x Tub side-walls & for the Base. Precision Counter/ Stacker, delivers counted magazine stacks. Optical centering/ registration device for the Printing Plates via a Telecamera and Monitor. Machine can print upto 2 x Colors on the Tub-Base, another two Print Heads can be retrofitted to achieve 4 x Color printing on the Tub-Base. Machine can be preset for HD Printing. Central Operator Control Panel Modern PLC machine controls. Technical Specifications: Automatic Elevator Tray Feeder Auto-Conveyor to Main Print Unit Universal Screw Denester ARCOTEC CG30-2 Corona pretre ...

GILDEMEISTER CTX 320 linear V6 Turning-milling centre with complete equipment Year of construction: 12/2002 Control: SIEMENS 840D POWERLINE Machine number: 937060 Spindle hours: only approx. 18,245 (as of 06.05.24) Equipment: Main and counter spindle Y-axis C-axis Turret with 12 driven tool stations approx. 10 pieces of driven tools approx. 25 VDI recordings 2 pieces of collet chuck approx. 30 collets Parts Conveyor Belt Parts collector Probe Main Spindle Probe counter spindle bar feeder LNS QUICK LOAD SERVO III 2 Foot Switches Operating Instructions/Documentation All other accessories shown in the photos and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. More photos on request. Equipment, technical ...

King TB4 tablet counter Serial: TB4-2495/14 Tabletop TB4 tablet and capsule counter, Batches of up to 10,000, suggested output 5mm - 2000 tablets per min, up to 15mm 1000 tablet per min, twin discharge chutes, 1Ph

Overview  The KV 600 HP on-line shrink packer was built in 2016 by the German manufacturer beck packautomaten. The machine is fully functional, in very good condition and was only in single-shift operation from July 2016 to October 2017. After that it was stored as a backup.  Technical details Output: 20 packs/minute Operating hours: 1,265 h The following items were packed: Beer cans in trays (L x W x H) 405 x 205 x 120 - 170 mm 405 x 280 x 120 - 170 mm, transported crosswise  Film quality Polyethylene shrink film (flat film), Monoaxially shrinking, thickness 30 - 50 μm Max. roll diameter: 250 mm Inner core diameter: 76 mm Welding width max. 600 mm Passage height 280 mm (The pack height depends on the type and format of the product, film quality and film thickness) Packaged goods height max. 170 mm Packaged goods length max. 450 mm Working height 880 mm +/- 50 mm Running direction of ...

Description: EMCO Hyperturn 110 - SM2 - 1700 , Serial number and Control Serial number: H1114020734 Control system: SIEMENS Sinumeric 840D sl Working area Rotation diameter over bed: 720 mm Max. turning diameter: 710 mm Distance between the spindle noses: 1700 mm Traverse paths Traverse path X1 axis: 340 mm Traverse path X2 axis: 300 mm Traverse path Z1 axis: 1340 mm Traverse path Z2 axis: 1340 mm Traverse path counter spindle: 1360 mm Main spindle with C-axis , (Counter spindle specifications are identical) Angular resolution: 0.001° Spindle nose (DIN 55026): A2-11 Bore in the drawtube with clamping cylinder in mm: 110 x 1000 deep Bore in the spindle: 125 mm Bearing inside diameter in front bearing: 190 mm Bearing inside diameter in rear bearing: 170 mm Workpiece weight in the chuck max.: 500 kg Two tool turrets (specification per turret) Too ...

Description: Serial number : UA1M482H048269740 Registration E 5301 BGW ENGINE group vag 1.9 TDI 4 cylinders turbo 100 hp 40 Km/h Contains pressure guns (see photo) Tank capacity 2000 L Sweeping width from 1300mm up to 2500m with boom Contains CE Change of ownership at buyer's expense Capacity for 2 occupants Rear camera Total / working hours according to the counter: 4082 / 1873 Mileage according to the counter: 22362 IMPORTANT: Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities) Approx. Onsite Dimension. (l x w x h): 6,000 x 12,700 x 2,000 mm, weight approx.: 2,690 kg

number of spindles:8 spindle passage:67 mm Machine type: CNC controlled multi spindle automatic lathe Manufacturer: MORI SAY Type: TMZ 8/67 CNC Yob: 2018 Double four-spindle machine, eight-spindle machine with spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 collets equipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of: indexing speed of the spindles drum with bar feed at station 1 speed and orientation of each of 8 main spindles speed and position of each of 8 frontal slides speed and position of each of 7 compound slides speed and position of the cut-off slide at station 8 for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer. Machine equipped with the following optional items: BAR LOADER automatic bar feeder model PB 60 by CUCCHI BLT for bars  ...

Model:2012, 1500mm Spindle:115 mm, Over Counter Diameter: 580 mm, Swing Diameter on Support: 300 mm. Bridge Gap Diameter 740 mm. DIAMETER Counter Width: 700 mm, Transverse Support Width: 460 mm, Turning Size Net:1500 mm, SPEED INTERVALS: 16 STEPS / 26 - 2000 rpm. ENGINE POWER: 7.5 KW Sleds are clean. ( FIXED and TRAVELING BED ) 3x 300 Mirror, 3x 200x Mirror HIGH PRECISION RADIP ENGINE / SERIAL MOVEMENT WATER AND LIGHTING EQUIPMENT BACK SHEET AND MIRROR PROTECTION AND CHIP SPRINGS IT IS ON THE SHEDDING HOUSING. FLANGES, TAILS, KEYS and FULL tool kits are available. Fixed bed, floating bed and special pipe bed in different large diameters (2 pieces), Rapid on Transverse Support, There are double-stage and rapid (fast movement) tailstock. Swich Stopper Feature for Occupational Safety. ( EMERGENCY STOP BUTTON ) It has been used very little and cleanly. HIGH SP ...

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.

Piston pump for dosing, type EK 1 H, with batch-control by electric impulse batching counter. Working pressure 7,5 bar, dosing stream 290 l./h max., hose coupling Rd 34 x 1/8 inch with hose tail NW 15, with switchgear, mounted on table.

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Parallel shaft gear with e-drive 30 kW (e.g. for use with a ball mill), motor shaft diameter 45 mm, N1 = 1.450 RPM, N2 = 14,5 RPM, drive shaft diameter 130 mm, with electrical brake, clutch with counter disc 600 mm diameter. Oil 190 CSX/50°C - Wa-No. 369226. Complete on base frame.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

The basic unit includes following modules (standard equipment): ï?  Compact and stable design in modular design ï?  All feeding systems that ensure an optimal product handling, are adaptable ï?  Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï?  Wear-free, infinitely adjustable, patented tension system ï?  Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï?  Mechanical locking of the clamping bar, this precise slide clamp and sealing ï?  Product protection by security monitoring via light barriers in the Clamping range ï?  Switching and Pneumatics Cabinet integrated into the machine ï?  maintenance-free and oil-free operation Technical data: ï?  Control right ï?  Control Panel of Lauer PCS (standard)  ...

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.