cnc turret used for sale

Pressure: 30 t Sheet length: 1250 mm Sheet width: 750 mm Positions ATC: 0   CNC Brand: Euromac CNC Model: Europunch Make Euromac CX75 Type CX 750 x 30 CNC Year 1995 EUROPUNCH Pressure (metric ton)Force = 30 T Sheet length (mm)L = 1250 Sheet width (mm)W = 750 Pos ATC   Max 6 mm Large tool package 50xPos. accuracy 0,1 mm Rapid feed 30.000 mm/MPower 400 V / 4 kW Fully hydraulic machine Change speed 10 - 15 sec.  

faceplate diameter:8000 mm swing diameter:10000 mm turning height:4500 mm workpiece weight:120/200 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2300 mm slide stroke:horizontal: 5300 mm cross section of ram:300x300 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:270 t Machine size (LxWxH):14000x10000x9000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the ri ...

- Turning diameter: 250 mm - Center height: 125 mm - Turning length: 800 mm - Speed range: 3,000 rpm - Total power: 9 kW - Machine weight: 650 kg - Space requirements (W x D x H): 1.4 x 0.8 x 1.85 m - Documentation: yes - Condition: very good Details Lever pliers quick clamp chuck mounted on main spindle via intermediate flange. For compression collets type 173E. Otherwise in standard design according to the present original underlay, GDW lever with push button for spindle start, GDW material stop mounted on the grooving carriage behind the center of rotation, monitoring by Beru switch by means of actuating plungers. Ram diameter 5.0 mm, standby light 3-colour with functions: "locked"-"standby"-"operation", GDW set-up key holder for safe bridging of the stop function, very well maintained machine from a workshop for the disabled, little running Accessories SCM collets:  ...

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

Turret milling machine Brand: HESSAPP (Made in Germany) Model: HC-50et Year: 1970 Description: - Table length: 1180x330mm - Spindle turning speeds: 70 - 6000rpm - X axis travel length: 600mm - Y axis travel length: 350mm - Z axis travel length: 500mm

Vertical turret milling machine Manufacturer: LAGUN Model: FTV 5-SP Year of manufacture: 2008 Few working hours, machine in condition like new

Table ø 1000mm Max turning height 1100mm

Hydraulic turret. -Rapid, 3-way quick-change holder. -Shot V size: 82 mm. -Total size: 300W x 660L x 290H mm. -1 Hose needs to be replaced, see photo 6.

faceplate diameter:3500 mm swing diameter:3800 mm turning height:2300 mm max. turning diameter:3800 mm table load:40 t table speeds:10 - 38 1/min transmission ratio:2 Stufen cross travel of ram-slide:rechts: 2500 mm cross travel of ram-slide:links: 2200 mm Travel of Ram (vertical):1500 mm total power requirement:70 kW Rams:2 Stück

faceplate diameter:3000 mm swing diameter:3400 mm turning height:3000 mm max. turning diameter:3400 mm max. workpiece weight:25 t weight of the machine ca.:105 t Dimensions (L/W/H):6450x7500x6950 mm

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg

Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Parallel lathe used Brand: AMUTIO Model: HB575 It includes: - Hydraulic plate 3 claws of 240mm - Conventional plate with 3 claws of 250mm - Lunette open Diameter on bench: 575mm Maximum diameter on carriage: 525mm Diameters on transversal carriage: 300mm Height of points: 250mm Distance between points: 1,500mm Bar step: 51mm No. Spindle speeds: 18

Vertical working stroke 435 mm Horizontal X working stroke 520 mm Recirculating ball screws diameter 40 mm Ball screw pitch 8 mm Axis movement motors 12 Newtons On-axis reading system with optional ballscrews optical scales CNC Fanuc Maximum lathe diameter 250 mm Max. put diameter 250 mm Spindle Asa 6 Max. electro spindle power 22 kW Maximum speed 6000 Rpm Maximum torque 119 nm

The chuck is self-centering with 6 jaws and has a diameter of 1000 mm with the possibility of processing pieces up to a size of 1400 mm. The total electrical absorption of the lathe is approximately 130 A and includes: • spindle motor • x and z axis motors • head lubrication pump motors • refrigerant pump motor • hydraulic central pump motor • crosshead motor The CNC on the machine is FAGOR. Electrical diagrams and machine use and maintenance manuals are available

- CNC Siemens SINUMERIK 3N with SIMODRIVE 611 - 30 Tn. - 19 standard station + 2 auto-index stations. - New TFT control panel. - 75.000 working hours. - Currently in use. - Sold to make space for a more powerful model.

Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440

Webster & Bennett 72” E-R Series Elevating Rail Table Size 72” / 1828 mm Machine swing 84” / 2133 mm Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. / 127 to 6.35 mm Max Height under cross slide 48” / 1219 mm Max Height under turret 48” / 1219 mm Ram Travel 38” / 965 mm Main motor 40hp /29 kW Newall 2 Axis Digital Read Out

Year of construction 2008 Vertical lathe type Working range 760 mm for two mandarins Spindle motor power 30 37 kW Asa 11 spindle connection Spindle revolutions 25 1500 Turret with 12 positions on each side FANUC numerical control Machine weight 23,500 kg Year 2008

The machine is in good technical condition, testing possible upon agreement. Clamping plate diameter: 1000 mm Max. diameter of peripheral turning: 1150 mm Max. workpiece height: 900 mm Performance of the main engine: 40 kW Machine weight: 12,000 kg

Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg

The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm

This TECHNOLASER 2000w Turret punching machine was manufactured in 2005 in Croatia. It has a 2000 W laser generator power, with a maximum X-axis stroke ranging from -10 to 3010 mm and a maximum Y-axis stroke ranging from -10 to 1510 mm. It has a X-axis positioning speed of 100 m/min and a Y-axis positioning speed of 60 m/min. The machine can handle sheets weighing up to 350 kg. Contact us anytime for further information.

The machine is in good technical condition, it can be tested under current. With accessories. The machine is in good technical condition, can be tested under power. With accessories. Parameters: 1150mm, 1400mm

Table diameter: 1250 mm Max. work-piece: -Diameter: 1400 mm -Diameter on cross support: 1300 mm -Height: 1150 mm

Description: Face plate diameter 1800 mm weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,000 x 4,600 mm

CNC Fanuc 18i-T Machine complete with motorized tools and C axis SPINDLE: Max turning diameter: 1,200 mm Maximum diameter admitted: 1,280 mm AC spindle motor power: 37 - 45 kW Max spindle revolutions: 1,600 rpm Spindle connection: ASA 15 Rapid speeds: m/min 12 SLIDES: X axis travel: 941 mm Z axis travel: 650 mm Nominal engine torque: Nm 25 - 25 Peak engine torque: Nm 80 - 80 TOOL CHANGE: Number of tools: 24 Tool holder: HSK 100 Max weight per cell: 10 kg GENERAL DATA: Total weight: 15,500 kg Installed power: kW 92 Maximum power (10 sec): kW 105

faceplate diameter:10000 mm swing diameter:10000 mm turning height:5000 mm ram head dimension:280x280 mm workpiece weight:200 t table turning speeds:0.23 ? 14 U/min transmission ratio:2 Stück Travel of Ram (vertical):2500 mm Travel of ram (horiz.):5150 mm Machine size (LxWxH):ca. 19500x11500×11600 mm main drive:132 kW weight of the machine ca.:290 t CNC controller:Siemens 828D/Fanuc 0i TF hydr. components:Kompass (Taiwan) Rams:2 (konv. + CNC) Stk. servo spindle motor:Siemens/Fanuc CE-design:optional Stock machine with short delivery time of only approx. 3-4 months. Main components available! Brand new vertical lathes double stand, type KRAFT, type VTL - 100 CNC incl. Siemens 828D or Fanuc 0i TF with two tappets (one piece of conventional and one piece CNC controlled ram) Substantially parts of the hydraulics of Taiwanese manufacturer compass Illustration similar. Also leasing and hire ...

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mm swing diameter:1250|1600|2000|2300 mm turning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mm table speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/min transmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 t max. torque on the faceplate:20|25|25|25 KN rapid feed of tool post:8000|3000|3000|3000 mm/min feed speeds:0.1 - 500 mm/min Max. cutting force of tool head :18|25|30|30 KNm Travel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mm Travel of ram (horiz.):850|1000|1115|1400 mm Cross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mm power maindrive:22/30|30/37|37/45|37/45 kW weight of the machine ca.:9|12,5|18,5|20,5 t Machine size (LxWxH):2360x2277x3403|26 ...

:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mm swing diameter:1200|1600|2000|2300|2600 mm turning height:1000|1250|1400|1600|1500 mm table speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/min transmission ratio:16 max. workpiece weight:3,2|5|8|8|8 t rapid feed of tool post:1800 mm/min feed speeds:0,8-86 mm/min in X-Achse Travel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mm Travel of ram (horiz.):630|915|1115|1250|1500 mm max. vertical adjustment of side-support:900|900|980|980 mm max. horizontal adjustment of side-support:630|630|500|500 mm Cross rail travel :850/1100|890/990/1240/1640|1240/1640 mm power maindrive:22|30|37|37 kW weight of the machine ca.:9|14|18|23|21 t Machine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mm tool holder:5 fach :LED 4 jaw chuck:mit  ...

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mm swing diameter:2500|2800|3100|3500 mm turning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mm max. torque on the faceplate:63000 Nm max. workpiece weight:10/16 t table speeds:0,5-80 |0,5-80 |2-63 |2-50 1/min Travel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mm Travel of ram (horiz.):1400|1600|1700|1800 mm rapid traverse X-axis:3 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55 kW Weight approx.:32/35/37|35/38/40|36/40/42|43/45 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mm swing diameter:4000|5000 mm turning height:2500/3150/4000|2500/3150/4000 mm max. torque on the faceplate:100000 Nm max. workpiece weight:32/50/83 t table speeds:2 ? 40 1/min Travel of Ram (vertical):1300/1600/2000 mm Travel of ram (horiz.):2250 | 2800 mm rapid traverse X-axis:3|4 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55|75 kW Weight approx.:58/75/115 |58/75/115 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

faceplate diameter:4700/5700 mm swing diameter:6300 mm turning height:3150/4000 mm workpiece weight:63/100 t table speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNm slide stroke:vertikal: 1600/2000 mm slide stroke:horizontal: 3400 mm cross section of ram:240x240/280x280 mm Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:90/110 kW weight of the machine ca.:110/170 t Machine size (LxWxH):9000x7000x8000 mm control:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

faceplate diameter:6300 mm swing diameter:8000 mm turning height:4000 mm workpiece weight:120 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2500 mm slide stroke:horizontal: 4350 mm cross section of ram:280x280 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:190 t Machine size (LxWxH):11000x9000x8000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right ha ...

faceplate diameter:4000 mm swing diameter:5000 mm turning height:2500 mm max. turning diameter:5000 mm table load:40 t table rotation speed:0,1-80 (2-stufig) U/min max. torque on the faceplate:108000 Nm Travel of Ram (vertical):1800 mm Travel of ram (horiz.):-2500~+2900 (aus Tischmitte) mm ram head dimension:300x300 mm spindle speed:10-2500 (2-stufig) 1/min spindle taper:50 SK rapid power traverse in X-and Z direction:10/10 m/min feed speeds:1-3000 mm/min Cross rail travel :1680 mm Tool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mm machine length:s. Anlage mm machine width:s. Anlage mm drive capacity - spindle motor:18,5/22 kW coolant pump drive:3 kW servo motor X-axis:9 kw servo motor Z-axis:9 kw table drive:100 kW :300 kva positioning accuracy:0,01/500 mm repeat ...

faceplate diameter:5000 mm swing diameter:5200 mm turning height:3000 mm max. turning diameter:5200 mm Travel of Ram (vertical):1500 mm Travel of ram (horiz.):+/- 2500 mm ram stroke speed:15000 mm/min cutting capacity:150000 Nm in X-/Z-Achse ram head dimension:400 x 400 mm CNC controller:Siemens/Fanuc/Fagor Rams:2 Stk. Scales:v. Heidenhain servo motors:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor ATC:32/60/90 fach Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coo ...

faceplate diameter:1400 mm swing diameter:1600 mm turning height:1000 mm faceplate turning speed range -stepless-:1 - 250 U/min max. horizontal adjustment of cross-rail sup.:950 mm max. adjustment of vertical turret slide:700 mm max. vertical adjustment of side-support:1000 mm max. horizontal adjustment of side-support:630 mm adjustment of cross-rail:660 mm adjustment speed of cross-rail:400 mm/min max. workpiece weight:6300 kg feed per revolution:0,025 - 10 mm/U power capacity:56 kW weight of the machine ca.:21,5 t dimensions of the machine ca.:3 x 4,2 x 4,2 m with 2-axes digital readout 5-station turret head side head V-constant cutting speed

faceplate diameter:6000 mm swing diameter:6500 mm turning height:3000 mm slide stroke:2500 mm cross rail adjustment - vertical:1800 mm faceplate turning speed range:0,40 - 78 U/min workpiece weight max.:80.000 kg main drive motor:150 kW total power requirement:180 kW weight of the machine ca.:160 t dimensions of the machine ca.:15 x 10 x 8,7 ü.F. m with CNC NUM 1060 hydrostatic guideways 6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm. angular milling head automatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50 coolant attachment and chip conveyor

An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

CNC control NUMERIK Karl-Marx-Stadt, VEM CNC 600-3 CNC 666311291622216 B.: 1985 Operating voltage: 220 V AC 50 / 60 Hz Power consumption: 1.0 kW used, tested ! Dimensions: 700 x 600 x 2000 mm

CNC press brake KNUTH AHK F2508 CNC built in 2017, machine no.: 161251, tool length 2,500 mm, column width 2,050 mm, pressing pressure 800 kN, machine weight 6,460kg, 14,190 strokes - 501 working hours, incl. tool set, control Cybelec DNC 8805

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Turning diameter: 505 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik Make DMG Gildemeister Type CTX 410 Live tooling Year 2004 Dmg Gildemeister ctx 410 with CNC Siemens Centre height (mm) 505 Diameter Center distance (mm) 600 mm Spindle bore 76 mm CNC Siemens Turret 12 positions Live tooling- Dimensions - Length : 3.175 - Width : 2.080 - Height : 2.000 - Weight : 5.500 Kg  

control: OSP 5000L-G greates pass round over bed: 450 mm turning diameter: 400 mm turning length: 730 mm Tool turret 12 positions: transmission ratio: 4 chuck: 300 mm total power requirement: 35 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3890 x 2880 mm BIG MASCHINE 450 X 730 MM 2 TURRET CNC CONTROL OSP 5000 L WITH OUT TAILSTOCK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock number 1105-03899 Machine type: CNC lathe - inclined bed machine Make HAAS Type HL 2 Year of construction: 1997 Control type: CNC Control Haas Storage location HAGUENAU FRANCE Country of origin Delivery time: immediately Freight base from location Technical details Turning diameter 250 mm Turning length 520 mm Control Haas Chuck diameter 204 mm Passage 76 mm Swing diameter 420 mm Speed 3400 rpm Power: 407 Nm Power: 15 KW Tool changer 12 SPEED Total power requirement 20 kW Machine weight approx. 4 t Dimensions approx. 3.3 X 2 X 1.9 H m Information CNC HAAS TURRET VDI 12 POSITION LINING DIA 204 MM TAILSTOCK