cnc milling machine used for sale

Ø 8-16-mm, wire diameter change automatically, data entry by hand or scanner on the PC, 6 reels 3 ton cols. Cutting, straightening and bending system from ring material with 2 bending heads. Allows the production of hangers or long bent irons with wire up to Ø 160mm.

Formcook AB forming machine, machine number: WIKING 6024, year of construction: 2001, 400 V, 50 Hz, 13.3 kW, capacity: 10-60 per minute, weight: 1750 kg, dimensions forms: (6x) Ø 85 mm, total dimensions: 1650 mm x 1160 mm x 2400 mm. Including pallet with forms, dimensions forms: (4x) Ø 130 mm, (8x) 60 mm x 25 mm, (7x) 65 mm x 30 mm and (8x) 60 mm x 30 mm.

Sympak packaging machine, machine type: SAPAL BN-L-2, serial number: 10899, year of construction: 1988, overhauling year: 2009, 380 V, 50 Hz, 10 A, film width: 95 mm, infeed belt, belt width: 30 mm, total dimensions: 1900 mm x 1700 mm x 1850 mm, dimensions switch cabinet: 1000 mm x 500 mm x 1770 mm.

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

CNC milling machine 2100x4000mm 9kW HEAVY DUTY TechnologieCNC CNC Industry 2.0 2140 ATC The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. ✔The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 9kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as t-groove slots for manual clamping of irregular shapes. ✔ATC - The machine is equipped with an automatic linear magazine wi ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. R9tu9xj Standard equipment ✅ Hybrid table, i.e. vacuum, enabling n ...

We offer for sale a 4-axis CNC milling machine MAHO MH-C 800, including a rich set of tools, jigs, fixtures and accessories (solid vices, fixtures, etc.), including two new sheet metal workshop cabinets. The spindle is mounted both horizontally (horizontal) and at the same time the original vertical head is installed on the machine. The machine has a system for cooling the workpiece with cutting fluid (the photos do not show the gutter part around the table for fluid drainage, but it is included in the price). The machine is in 100% condition. In 2018, a renowned company performed a complete GO. Since then, the machine has worked only about 300 operating hours on light tasks. The machine has COMPLETELY COMPLETE documentation, namely: Electrical connection of the machine Mechanics Hydraulics Control system documentation Programming documentation etc. Machine parameters:  ...

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

PLOT ELECTRONICS SENTINEL 2030 CNC milling machine was built in Poland in 2014. The machine, which is designed for precision cutting, drilling and engraving of materials, has a lightweight yet rigid design that eliminates any stress and guarantees very fast idling and machining feeds. The offer price includes extensive equipment, consisting of, among others, a reliable BECKER VTLF 2.250 vacuum pump, a high-speed spindle and a state-of-the-art CNC controller. To this date, the SENTINEL SN 2030 milling machine has machined PVC, PP and PE plastic sheets. The total weight of the machine is approximately 2000 kg. Technical data of the PLOT ELECTRONICS SENTINEL 2030 milling machine - CNC control: cncGraF Pro - number of axes: 3 (X,Y,Z) - feed in X/Y/Z axis: 2000/3000/270 mm - approach speed: 500 mm/s - table type: aluminium T-slot table + vacuum table - vacuum pump: BECKER VTLF 2.250/ ...

2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...

CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

Horizontal / vertical cnc Milling machine travelling courses 25001400800( 1600 with rotation of 4º axe) control heidenhain 355 . the machine its underpower. Very robust machine with 28 ton, ideal to make a retrofiting and have big and very robust machine with a low investment. we accept an offer.

We sell a TRAK DPM 800 CNC milling machine in very good condition. Machine having been little used. DPM type 3 axes operating in MANUAL and CNC Machine stroke X 800 mm Y 420 mm Z 610 mm Table height 970 mm Table dimensions 1270 mm x 320 mm Feed rate of the X, Y, Z axes 5 - 2540 mm / min Manual feed speed Z axis 0-450mm / min Head tilt + 90 ° / -90 ° Spindle diameter 100 mm Manual spindle stroke 120 mm Spindle cone ISO 40 DIN 2080 M16 Spindle speed 70-3800 rpm Spindle power 3.75KW Drilling capacity 36 mm Milling capacity 80 cm3 / min Tapping capacity M30 Maximum weight on the table 600 Kg Integrated watering tank with 1CV / 60 liter pump Automatic centralized lubrication PROTOTRAK command Type AGE3 DC motor on X, Y, Z axis Digital display X, Y, Z Dialogue programming system RS 232 / CAD-CAM link To be taken on site, unpackaged. Exworks delivery

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

For sale a fast and reliable 3-axis CNC milling machine with the possibility of adapting to 5, Erowa robot, fog extractor, spindle cooler, in very good technical condition included. No play in the working area. The spindle is in perfect condition. Data: - year 2008, - Andronic 2060 control, - HSK E 40 spindle (42,000 rpm) , 17KW, with cooling, - 40,000 machine hours, - 22,000 rg of spindle, - a warehouse with 40 places, - X 700 mm, - Y 550 mm, - Z 450 mm, - 3D probe, - BLUM gate for tool measurement and control, - USB, netzwerk and ethernet, - fog extractor, - load capacity 2000 kg, - full documentation. -country of origin Germany. Erowa X / R 50 robot for replacement of finished parts included. Adaptable to replace the second pallet. Additionally: Second cooler for parts, 60 pieces of HSK holders, two Swiss four-jaw chucks. It is adapted to work with CAD-CAM.  ...

CNC milling machine for stone processing, granite, tombstone making A machine specially adapted to heavy loads, allowing for effective processing of stone, granite, quartz, sinters. Specifications: Working area: 1300x2500mm Z axis: 400mm Load capacity of the working table - 1500kg! Electrospindle: 5.5kW liquid-cooled, powered by a 7.5kW inverter Drive: Full 750W LEADSHINE servo drives on each axis (Dual on Y axis) Linear guides and carriages: SHAC 25mm + helical racks Control: DSP manipulator NK105-G3 CAD/CAM software: Artcam Open 2017 Automatic central lubrication Double Vented Electrical Cabinet Machine design suitable for industrial processing of all types of stone/aluminium Water Table Double Material Cooling Guide rollers to assist in insertion and removal of the workpiece Automatic tool height sensor Use: Ciw2oml Broadly understood processing of all ty ...

CNC milling machine DECKEL type FP 3 A Fabr. No. 2206 - 0325 Year of construction 1980 CNC line control GRUNDIG CNC 2101 Travel X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm /min. Motor power Spindle drive 2 / 4 kW pole switchable Mains connection 380 Volt, 50 Hz - CNC line control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - Universal swivel-tilt-turntable - Hydro-mechanical tool clamping - Coolant device in the machine foot - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used

CNC milling machine make MAHO type MH 600 ESerial -No: 63770, year of construction 1986Working area X: 600 mmWorking area Y: 400 mmWorking area Z: 400 mmTable size / rigid angle table: 1000 x 400 mmTool holder: ISA 40Quill stroke: 80 mmSpeed range: 80 - 4000 rpm.Feed range X, Y, Z: 1 - 2000 mm / min.Rapid traverse X: 4 m / min.Rapid traverse Y: 3 m / minRapid traverse Z: 5 m / minResolution: 0.001 mmDrive power / total connection value: 4.0 kW / 16 kVAFootprint: 2300 x 2160 x 1900 mmWeight: 2.25 tWith- CNC track control type 432 Eused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Milling Machine Fabr. KNUTH Type WF 1 CNCYear 1995Table mounting surface: 270 x 700 mmTable movement along X: 300 mmTable movement vertical Y: 200 mmTable movement across Z: 350 mmSpindle mount horizontal and vertical: ISO 408 spindle speeds horizontally: 110 - 1230 rpm.8 spindle speeds vertical: 150 - 1660 rpm.8 feeds: 26 - 290 mm / minRapid traverse: 1100 mm / minPinole way: 60 mmDrive power: 3.7 kWDimensions approx: 1310 x 1380 x 1650 mmWeight approx: 1000 kgWith- CNC track control type Commander- rigid angle table- Vice- Various tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC milling machine make MIKRON type WF 21 CYear of construction 1986Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mm21 speeds continuously: 31.5 - 3150 rpm.Tool holder: ISO 40 M 16with insertion grooveQuill movement vertical: 90 mmFeed rate in all 3 axes: 2-3000 mm / minRapid traverse speed X- and Y-axis: 6000 mm / minRapid traverse speed Z-axis: 5000 mm / minelectrical connection power: 8.7 kWDimensions: 2900 x 2650 x 2000 mmWeight approx: 2300 kgWith- rigid angle table- CNC control Heidenhain TNC 155used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC milling machine make DECKEL type FP 4 CCtMachine -No: 203 built in 1988X-axis: 600 mmY-axis: 500 mmZ-axis: 500 mmstepless speed range: 18 - 6300 rpm.Feed range stepless: 2 - 10000 mm / min.Rapid traverse: 10000 mm / min.Tool holder: SK 40Input resolution: 0.001 mmMain drive: 8.0 kWTotal installed capacity: 23 kVANumber of tools in the changer: 26Max. Tool weight: 10 kgMax. Tool length: 300 mmMax. Tool diameter: 100/160 mmWeight approx: 5050 kgOutside dimensions approx: 2400 x 2500 x 2500 mmWith- CNC Control Dialog 11- Tool changer- rigid angle table- Angle stop- Separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machin ...

CNC Milling Machine Fabr. TOS CELAKOVICE Type FNG 32 NCMash. -No: 7200075Table longitudinal path X: 600 mmUpper arm lateral travel Y: 400 mmTable perpendicular path Z: 400 mmSpindle mount: ISA 40stepless speeds: 10 - 3150 rpm.stepless feed rates in 3 axes: 1 - 9000 mm / min.Weight approx: 2.6 tDrive power: 10 kVAWith- CNC control Heidenhain TNC 155- rigid angle tablelittle usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CME FS2 Vertical CNC Milling Machine X : 2000 mm Y : 1000 mm Z : 1000 mm Working hour : 8000 Machine is in excellent condition

Fil CNC milling machine with SELCA 3045 Racing: X4000 Z1500 Y1000 W1000. Head indexed 2.5 degrees, ISO 50 taper, 3000 RPM max. Fully functional machine.

CNC Milling Machine MAHO MH 1200W Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm CNC: PHILIPS CNC 532 Year of construction: 1993 Working hours: 34 000 hours Horizontal + vertical spindle Cone ISO 40 Spindle speed: from 20 to 4000 RPM Table size: Ø 1000 mm x 800 mm Rotative table AXE B - 360 000 points Max weight on table: 1000 kg Vertical sleeve travel: 80 mm Swivel head Programmable feeds X/Y/Z - 1 to 3000 mm/min Rapid movement X/Y/Z - 8 meter/min. Central lubrication Lubricant tank Voltage:: 380 V Dimensions (L x W x H): 3200 x 3200 x 2400 mm Weight: approx 9 T

Rambaudi 5 axis CNC Milling Machine 4500 rpm x:3000 y:2000 Z:1200 Fidia CNC Control

: 4378 No.1 gebr. CNC milling machine with 4 cutting heads Fabr. RAMBAUDI, Rammatic 804 type Bu. 1992 with HEIDENHAIN iTNC 530 ARB.-ber.: 1500 x 815 x 815 mm, power: 4 x 11 kW Accessories: clamping table 3250 x 815 mm Maximum table load 5000 kg other: spindle retainer for SK 50 Speed range 40 - 3600 min-1 Quill stroke 150 mm Space requirement approx. 8 x 4 x 4 weight approx. 20 to

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

FADAL 6030 cnc milling machine FADAL 6030 Fadal 6030

MIKRON WF51C/150 universal cnc milling machine Numerical control: HEIDENHAIN TNC 155 Table (mm): 1000 x 500 Strokes (X x Y x Z): 800 x 500 x 460 mm Year: 1985

5 AXIS CNC MILLING MACHINE SACHMAN T314-HS” Year: 2003 Spindle: ISO 50 Spindle revolutions: 5000/min Power: 35kW Numerical Control: Selca S4045PD X axis travel: 3500mm Y axis travel: 1400mm Z axis travel: 2000mm

AJAX Premier 1500 CNC Milling Machine Fagor 8050M control Table size 1472mm x 280mm Spindle taper 40 ISO Speeds 50-3750 rpm XYZ travels 820mm/455mm/450mm Spindle motor 3.7kW C/W Interlock guards Auto lubrication Power drawbar Coolant. RS232 Interface Excellent condition

CNC milling machine STYLE BT-1500 is in very good technical condition. Can be seen in operation by appointment. - fourth axle /new unused, original packaging/, complete with tools and equipment, 3 large hydraulic vices /hardly used/ + additional new mobile handling trolley / lift 2t/

Description: tool holders for CNC milling machine SK50 36 pieces weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

Lagun GCM 8 CNC milling machine is in good technical condition. Heidenhain iTNC 530 control system. Can be seen by appointment. Number of hours 15733 hours Clamping surface of the table: 9500x1100 mm Longitudinal movement of the table - x-axis: 8000 mm Transverse movement of the table - z axis: 2000 mm Vertical table movement - y axis: 1200 mm Spindle taper: ISO 50 Spindle speed: 3000 rpm Max. workpiece weight: 6000 kg Spindle diameter: 85 mm

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

-Spindle diameter 160 mm -Spindle SK 50 DIN 69871 - spindle power 90 kW -X-axis 16,000 mm -Y-axis 4.455 mm -W-axis 900 mm -Z-axis 800 mm

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg