We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,155 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Hydraulics Heavy Duty Lifting Cylinder 1 pc. 50to, Euro 400,- 1 pc. 100to Euro 500,- Price per piece
used
length: 5000 mm payload: 18 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Machine number 3317 Including 2 steady rests, tailstock, faceplate diameter 1000 mm Drehlänge: 9,500 mm, turning diameter over bed: 1,500 mm, turning diameter over slide: 1,100 mm, spindle bore: 90 mm, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 18,500 x 3,000 x 1,900 mm
used
Description: Including faceplate, diameter 1600 mm, tailstock and steady rest , Machine number 3907 Drehlänge: 6,500 mm, turning diameter over bed: 2,400 mm, turning diameter over slide: 2,000 mm, spindle bore: 80 mm, control: SIEMENS SINUMERIK, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 2,450 x 2,750 mm
used
Description: Dimensions of the support surface: 1700 x 600 mm Max. load: 6000 kg Approx. Onsite Dimension. (l x w x h): 3,500 x 650 x 1,900 mm, weight approx.: 150 kg
new
Heavy Duty Transport Chassis, Armoured Castor, Heavy Duty Castor, 4 pcs PAGUS 350 x 300 x 67 mm Minimum height: 67 mm bearing surface (machine): 350 x 300 mm Mounting thread: M16 x 2.0 / M20 x 2.5 ( in the steel plate ) 2x Bore in the frame: Ø 20 mm Material thickness: 6 mm ( contact surface ), 15 / 30 mm ( frame ) Number of rollers per chassis: 4 pieces Roll diameter: Ø 45 mm Roll length: 120 mm Weight: 20.5 kg per chassis Other quantities on request ! as good as new ! Dimensions ( single chassis ): 350 x 300 x 67 mm Dimensions (packaging): 800 x 400 x 310 mm
used
Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg
used
Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,800 x 2,500 mm, weight approx.: 500 kg
used
Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg
used
Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg
used
Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg
used
Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg
used
Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg
used
Turning diameter: 2500 mm Center distance: 3000 mm Spindle bore: 102 mm Numbers of bed guide ways: 1 Weight between centres maximum: 1 kg Centre lathe ZERBST - DP 1/S2 Zerbst modulair lathe 2500 x 3000 mm MACH-ID 2179 Make: ZERBST Type: DP 1/S2 Year: 1985 DBC Turning Length: 3000mm Swing over bed Ø: 2500mm Swing over cross slide Ø:1500mm Spindle bore: 102mm Length: 0mm Width: 0mm Height: 0mm Weight: 0kg Floorplates 4500 x 2200 mm
used
Turning diameter: 1600 mm Center distance: 7000 mm Spindle bore: 110 mm Numbers of bed guide ways: 2 Weight between centres maximum: 15000 kg CNC Brand: SPC CNC latheGurutzpe - GLX 16 MACH-ID 8505 Make: Gurutzpe Type: GLX 16 Control: Siemens 840D Powerline Year: 2016 Sauter 4 positions revolver Motorized tailstock 2 C-Type steady rest Work load not supported 15 Ton High pressure coolant with filter Spindle nose A-20 Torq 24000 Nm Chip conveyor DBC Turning Length: 7000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1300mm Spindle bore: 110mm Spindle power: 88kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Speeds / ranges: & ...
used
Turning diameter: 1400 mm Center distance: 13000 mm Spindle bore: 1000 mm Numbers of bed guide ways: 1 Weight between centres maximum: 20000 kg CNC Brand: Siemens Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller est 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1100mm DBC Turning Length: 13000mm Spindle power: 129kW Workpiece weight: 20000 Speeds / ranges: 1 - 300Rpm Feed rate X-Axis: 4500mm/min. Feed rate Z-Axis: 4500mm/min. Length: 20000mm Wi ...
used
Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
used
Heavy duty mobile slicing machine with slicing, dicing and dicing capabilities - FAM DORPHY Heavy duty mobile slicing machine with slicing, dicing and dicing capabilities. Suitable for any firm textured product, such as potatoes, beets, carrots, cabbage, mushrooms, peppers, onions, pickles and zucchini, as well as broccoli and cauliflower. Manufacturer: FAM Model: DORPHY Serial number: 12158 Year of manufacture: 2020 Condition: very good (used)
used
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 5000/2500/H1080 mm -Load capacity: 70 tons -Steering: double -Drawbar length: 1200 mm -Drawbar eye: Ø 40 mm -Wheels number: 16 pieces -Wheel size: 550/365-405 -Total dimensions: 6300/2500/H1080 mm -Weight: 6900 kg
used
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 3200/1600/H550 mm -Load capacity: 12.5 t -Tires: solid rubber -Number: 1x transport trolley available -Price per piece -Total dimensions: 3720/1600/H550 mm -Weight: 990 kg/pc.
used
Description: Heavy load trailer with - Double turntable steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - Reversible drawbar - 50mm impregnated wood overlay. Pick up only from KW10/11 possible Capacity 10000 kg Length 6000 mm Width 2500 mm Height 595 mm Rear axle: steerable Front axle: steerable Machine weight approx. 1,3 t Space required approx. 6.7 x 2.5 x 0.725 Approx. Onsite Dimension. (l x w x h): 6,700 x 2,500 x 600 mm, weight approx.: 1,330 kg
used
Description: Heavy-duty castors, 2 pieces Total capacity 12t. with turntable Load capacity 2 x 6000 kg Wheel diameter 75 mm Total height 105mm Weight 26kg Dimensions L x W x H 300 x 200 x 250 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 250 mm, weight approx.: 26 kg
used
Description: Heavy duty trailer with - Double knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1200mm - impregnated wooden pad. Load capacity 15000 kg Length 6000mm Width 2450mm Height 625mm Rear axle: steerable Front axle: steerable Tire dimensions 425 x 260 mm Machine weight approx. ,6 t Space requirement approx. 7.2 x 2.5 x 0.625 mm Approx. Onsite Dimension. (l x w x h): 7,200 x 2,450 x 700 mm, weight approx.: 1,860 kg
used
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 5000/2500/H1080 mm -Load capacity: 85 tons -Steering: double -Brake: compressed air -Drawbar length: 1200 mm -Drawbar eye: Ø 40 mm -Wheels number: 16 pieces -Wheel size: 559/356-406.4 -Total dimensions: 6300/2500/H1110 mm -Weight: 9000 kg
used
Description: max. bay load 9000 kg, drawer dimensions 1290 x 1260 mm, complete without contents Approx. Onsite Dimension. (l x w x h): 4,770 x 1,260 x 2,010 mm, weight approx.: 350 kg
used
Description: Rack height approx. 1680 mm, rack depth approx. 1200 mm, 3 bays, max. shelf load 800 kg Approx. Onsite Dimension. (l x w x h): 1,450 x 1,250 x 2,000 mm, weight approx.: 200 kg
used
Description: max. bay load 9000 kg, max. compartment width 1290 mm, compartment depth 1260 mm, max. compartment load 800 kg, without contents Approx. Onsite Dimension. (l x w x h): 2,820 x 1,270 x 2,000 mm, weight approx.: 300 kg
used
Description: max. shelf load 1000 kg, shelf depth 860 mm, shelf height 1680 mm, without contents Approx. Onsite Dimension. (l x w x h): 2,820 x 1,270 x 2,000 mm, weight approx.: 300 kg
used
Description: max. shelf load 9000 kg, shelf dimensions 1290 x 1260 mm, complete without contents Approx. Onsite Dimension. (l x w x h): 5,560 x 1,260 x 2,010 mm, weight approx.: 600 kg
used
Description: max. bay load 4000 kg, shelf width 1290 mm Approx. Onsite Dimension. (l x w x h): 1,460 x 1,270 x 2,000 mm, weight approx.: 300 kg
used
Description: max. load capacity 40 t, machine number 201567-1, platform approx. 4550 x 1500 mm Approx. Onsite Dimension. (l x w x h): 4,550 x 1,500 x 840 mm, weight approx.: 2,200 kg
used
Description: 4 units, lifting capacity 8000 kg each Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 700 mm, weight approx.: 120 kg
used
-The machine was partially overhauled in 2013, -Country of origin Germany, -extended from 7 m to 11 m turning length, -Geometry Santer revolver, -Turning diameter over bed 1,070 mm, -Turning diameter over support 710 mm, -Turning length 11,000 mm, -bed width 710 mm, -2 gears, -Speed 3.55 - 710 rpm, -quill diameter 200 mm, -quill stroke 350 mm, -Spindle passage 128 mm, -Conveyor -Drilling rig incl. drill rod length approx. Ø 200 x 2,430 mm, -face plate 1,000 mm, -Bezel 4 quills 500 mm open, -Main drive motor 71 kW, -incl. documentation, Attention! This machine has already been dismantled and is in storage.
used
turning diameter over bed:1630 mm turning diameter over slide rest:1190 mm turning length:5000 mm centre height:800 mm swing in gap:2100 mm bed width:1000 mm max. workpiece weight:12000 (zw. Spitzen) kg number of spindle speeds:16 4 - 242 U/min spindle bore:120 mm tailstock quill diameter:180 mm tailstock quill stroke:350 mm Weight approx.:22 t total power requirement:ca. 25 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm
used
turning diameter over bed:2300 mm turning diameter over slide rest:1860 mm turning length:5000 mm centre height:1150 mm swing in gap:- mm length of gap:- mm faceplate:1500 mm bed width:1000 mm max. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kg number of spindle speeds:3-300 U/min spindle bore:206 mm tailstock quill diameter:- mm tailstock quill stroke:- mm Weight approx.:26 t spindle drive:50 kW DRO:optional 4 jaw chuck:1500 mm Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm
used
turning diameter over bed:2600 mm turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm
new
turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15 kW max. workpiece weight between centers:4000 kg Weight approx.:6800 kg machine width/height:1500x1500 mm machine length:5150 mm 4-jaw independent chuck:800 mm steady fixed:Ø40~350 (mit Rolleneinsätzen) mm fixed steady:Ø100~520 (mit Rolleneinsätzen) mm follower rest:Ø30~120 mm multifix tool holder:Größe C Factory new heavy ...
new
:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mm turning diameter over slide rest:1000|1200|1500|1600 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1100 mm workpiece weight:12 (15 opt.) t spindle bore:130 mm spindle taper:140 spindle speed (3 steps):2,5-250 U/min metrical thread cutting:1~120 (44 Arten) mm longitudinal feeds:0.1 ~ 12 (56 Arten) mm/U face feeds:0.05 ~ 6 (56 Arten) mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:760 mm movement of the upper support:300 mm tool size:45 x 45 mm tailstock quill diameter:260 mm stroke:300 mm tailstock-quill conus:80 metrisch spindle motor:30 (50 opt.) kW tool holder:4-fach steady diameter:500-800 mm CNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loading warranty:12 months on parts only BRANDNEW conventiona ...
new
:SDM 1000E | SDM 1250E | SDM 1400E turning diameter over bed:1000|1250|1400 mm turning diameter over slide rest:650|900|1100 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm max. workpiece weight between centers:8000 kg bed width:755 mm spindle nose:A2-15 spindle bore:130 mm spindle speed (3 steps):3,15-315 U/min metrical thread cutting:1~120 (56 Arten) mm cross way of carriage:520|680|720 mm movement of the upper support:300|300|400 mm tool size:45 x 45 mm tailstock quill diameter:180 mm stroke:300 mm tailstock-quill conus:6 MK weight of the machine ca.:bei 3m: 12 t (jeder weitere Meter ca. 800kg) Machine size (LxWxH):bei 3m: 6100x1900x2000 mm tool holder:4-fach follower rest:50-220 mm 4 jaw chuck:1000 mm steady diameter:50-470 mm CNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loading warranty:12 months on parts only BRANDNEW conventional heavy duty center la ...
new
:KHL-160 | KHL-180 | KHL-200 | KHL-220 turning diameter over bed:1600|1800|2000|2200 mm turning diameter over slide rest:1250|1450|1650|1850 mm turning length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm bed width:1600/2100 mm workpiece weight:32t (40t,64t, 80t Option) spindle bore:85 mm spindle taper:120mm taper 1:7 number of spindle speeds:0.86-160 U/min metrical thread cutting:2-40 mm range of module thread:1.5-20 mm longitudinal feed:0.125-4.8 mm :0.063-2.4 mm movement of the upper support:quer: 700mm/900mm movement of the upper support:längs: 600 mm turning tool - shaft cross cut:70x70 diameter tailstock quill:300/500 mm taper of tailstock:100 taper 1:7 quill stroke:300 mm steady rest close/open:400-750/650-1200 mm main drive motor:80/110 kW 4 jaw chuck diameter:1000 - 1600 mm steady rest diameter:400 - 750 mm open steady:650-1200 mm CNC controls from:Siemens/Fanuc/Fagor
new
Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mm turning diameter over slide rest:345|480|680|880 mm turning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mm travel of cross-slide cross:370|420|520|620 mm movement of the upper support:200 mm bed width:600 (Monoblock) mm spindle bore:105mm (130 oder 155 opt.) mm spindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/min metric threading:1~240 mm feeds - longitudinal:0.1~24,3 mm/min feeds - cross:0.05~12,5 mm/min rapid traverse longitudinal and cross:4000, 2000 mm/min turning tool - shaft cross cut:32 x 32 mm tailstock quill diameter:100 mm tailstock quill stroke:240 mm taper in tailstock:6 MK main drive motor:11 (15 kw opt.) kW max. workpiece weight between centers:3000 kg Weight approx.:4t bei ...
new
Modell:5-800 | 5-1000 | 5-1200 | 5-1400 turning diameter over bed:800|1000|1200|1400 mm turning diameter over slide rest:510|710|910|1110 mm turning length:3000~12000 mm Distance between centres:3000~12000 mm centre height:500 mm bed width:900 (opt. 1200) mm spindle bore:155 (A2-11) mm spindle turning speed range:6-800 U/min spindle speed steps:variabel innerhalb der Stufe, 4 Stück tailstock quill taper MT:6 MK diameter of quill:165 mm quill travel:250 mm space requirements approx. LxWxH:10.800x2.200x1925 (8m Spitzenweite) mm machine weight:18200 (8m Spitzenweite) kg spindle drive:30 kW tool holder:manuell schwenkbarer 4-Fach Stahlhalter für Stahlhalterquerschnitte 32x32mm thread chasing dial:keine fixed steady:feststehende Lünette, Durchmesser 60 bis 290mm
new
:SDM-1460 | SDM-1660 | SDM-1860 | SDM-2060 turning diameter over bed:1460 | 1660 | 1860 | 2060 mm turning diameter over slide rest:960 | 1160 | 1360 | 1560 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1180 mm workpiece weight:20 t spindle bore:105 mm spindle taper:140 spindle speed:3-200 1/min, 4 stufig metrical thread cutting:1~60 mm longitudinal feeds:0.1~6 mm/U face feeds:0.05~3 mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:750 | 850 | 950 | 1050 mm movement of the upper support:280 mm tool size:45 x 45 mm tailstock quill diameter:280 mm stroke:300 mm tailstock-quill conus:100; 1:7 metrisch spindle motor:55 kW tool holder:4-fach steady diameter:250-600 mm CNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loading warranty:12 months on parts only BRANDNEW conventional heavy duty center lathe
new
Modell:SDM 850 Varia | SDM 1000 Varia turning diameter over bed:850|1000 mm turning diameter over slide rest:520|720 mm centre distance:2000/3000/4000/5000/6000 mm :1150|1350 mm :350 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min tool holder -shaft diameter:45 mm :90° feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0,04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min :900 mm/min metric threading:56, 1~120 mm tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15|18,5 kW :16,8|20,3 Kva max. workpiece weight between centers:4000 kg Weight approx.:7200 kg machine width/height:1600x1600 mm machine length:6150 mm (4000 mmSpitzenweite) 4-jaw independent c ...
used
screw-cutting lathe model 1M65 (RMTs 5000 mm) - Ryazan Machine-Tool Plant. Equipment after a major overhaul with modernization of the electrical and mechanical parts of the machine (a frequency converter is installed, the speed box of the machine is modernized (2-stage), the speed is controlled by a joystick) Specifications: Model 1m65 machines are designed for a variety of turning operations, including turning cones and threading: metric, inch, modular, pitch The largest diameter of the workpiece to be installed and processed, mm: over support, mm 650 over the groove in the bed, mm 1400 The biggest length of the workpiece to be processed, mm 5000, The length of the groove in the bed from the cartridge mirror, mm 390 Headstock spindle end size according to DIN 2-15M Number of spindle speed steps 24 Diameter of the cylindrical bore in the spindle, mm 128 Spindle speed limits, ...
used
Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels
used
Wohlenberg PT3 2000 IV Heavy Type CNC Turning Lathe Ø1820 x 12000 x 45 Tons maximum machining values. You can find more details among the uploaded pictures. Height of centres over flat way : 1010 mm Swing over turning slide : 1640 mm Swing over bed : 2000 mm Workpiece weight between centers : Maximum 28000 KG
new
90 m pallet rack Jungheinrich Heavy Duty New, very good condition, see pictures Height 5 m Depth 110 cm Beam length 3.7 m Load/compartment 3800 kg Load 18000 kg Frame blue Carrier white Year of construction 2023 Negotiation price: € 15.490,-- net from stock Offer consists of: + 25 pcs. frame pre-assembled, new, depth 110 cm, height 5 m + 144 pcs. carriers, used goods, length 3.7 m, 3800 kg ballast/compartment + 288 pcs. Suspension locks + 100 concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all price ...
used
Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type
used
We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price: â?¬13 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.