circular saw used for sale

Key data: 750 mm, 220 mm

Cutting area: dia. 220mm, U/I beam : 400 x 150 , feed rate: 0- 500mm/min , drive motor: 5hp, 1700kg, sgt. Condition.

Key data: 45 °, 2800 mm, 1200 mm

3 axis control with boom with digital display for inclination Sled with warranty Remaining warranty 4 years

Description: saw blade dimensions: 150 x 19 x 1,8 mm , table dimensions: 480 x 400 mm , weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 500 x 450 x 800 mm

Description: Serial number: 3603M03400 Nominal speed: 5000 rpm Nominal power: 1400 W Table dimensions: approx. 640 x 600 mm weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 500 mm

Description: Table dimensions: approx. 675 x 500 mm Speed range: 90 - 3000 rpm Mobile weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 750 x 1,100 mm

Description: Fabrication number: 243 Table dimensions: approx. 560 x 535 mm Stop: 0 - 400 mm Work table can be swiveled weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,100 mm

Description: Serial number: 0603331003 Nominal speed: 5200 rpm Blade diameter: 190 mm In case With operating instructions weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 410 x 290 x 320 mm

Description: Machine number: 99-58009 Power: 1.8 kW Saw blade diameter: 250 mm Suitable for mitre cuts Max. clamping width: approx. 90 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 660 x 1,450 mm

Description: - Serial number: 10.002PK - Table size: 710 x 900 mm - Saw blade diameter: 250 mm max - Saw blade bore: 20 mm - Motor speed: 2800 rpm - Saw shaft speed: 3800 rpm - Cutting height 90°/45°: 82/55 mm - Motor power: 3,1 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 950 mm

cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 380 V stroke: . mm : . square: 1200-100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 1,900 mm, weight approx.: 1,000 kg

Description: Including roller conveyor  , Attention: without visible material Approx. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,200 mm, weight approx.: 3,000 kg

Description: Machine number: 2867/1119 Table dimensions: 850 x 700 mm Saw blade can be tilted 45° Incl. mobile extraction system from the manufacturer SPÄNEX Approx. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 2,400 mm, weight approx.: 300 kg

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

: gebraucht : 1991 : 6252 : prompt, Zwischenverkauf v : Deutschland : 1450 € : 1 : 250 mm : 4500 U/Min : ca. 70 mm Höhe : ca. 48 mm Höhe : 2.2 kW : 950 mm : 950 mm : 950 mm : 156 kg Saw blade tiltable 90 - 45° Longitudinally movable Angle gauge +/- 45° Without operating manual Does not comply with the german UVV and austrian AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: serial number: AB/128460 Technical specifications: Dimensions for pieces to process minimumum squaring: : length 30 mm, width 50 mm maximumum squaring: : length 3200 mm, width 3200 mm saw angle adjustment 0 - 45° minimumum for cutting with paralel guide: 10 mm maximumum for cutting with paralel guide: 1270 mm minimumum height: 3 mm maximumum height: 100 mm with saw blade 315 mm diameter, at 90° maximumum height: 70 mm with saw blade 315 mm diameter, at 45° minimumum / maximumum diameter saw blade: 250 / 315 mm (inner diameter 30 mm) vitesse de rotation saw blade: 4000 rpm scoring blade diameter: 120 (inner diameter 20 mm) vitesse de rotation scoring blade: 8000 rpm fixed table dimensions: 900 x 550 mm mobile table dimensions: 3200 x 360 mm Approx. Onsite Dimension. (l x w x h): 5,200 x 2,400 x 1,700 mm, weight approx.: 770 kg

Description: • Total amount approx. 41 pieces: • Approx. 9 pieces: external diameter 180 mm, inner diameter 35 mm • Approx. 6 pieces: external diameter 180 mm, inner diameter 50 mm • Approx. 2 pieces: external diameter 200 mm, inner diameter 80 mm • Approx. 2 pieces: external diameter 240 mm, inner diameter 130 mm • Approx. 6 pieces: external diameter 120 mm, inner diameter 22 mm • Approx. 5 pieces: external diameter 420 mm, inner diameter 80 mm • Approx. 2 pieces: external diameter 470 mm, inner diameter 82 mm • Approx. 3 pieces: external diameter 350 mm, inner diameter 30 mm • Approx. 6 pieces of several types and diameters Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 70 kg

Carriage length 3200 mm Motor power 5.5 kW Bmawcrk3xgg Scoring machine, motor power 0.75 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.2.2

Description: Machine number: 548 Operating voltage: 400 V Frequency: 50 Hz Saw blade diameter: up to 370 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,950 mm, weight approx.: 400 kg

Key data: 46 °, 3200 mm, 1250 mm

I'm selling a sliding table saw with a scoring machine Manufacturer: OTTO MARTIN Model: T60 Classic Year of construction 2007 Cutting length 3200mm. Cutting width 1250mm (opzion) Cutting height max. 130mm (saw blade diameter 400mm) Saw blade and scoring swivel 0-46° digital Digital saw blade and scoring height adjustment Digital display of rip fence and working heights Activation of the main saw blade and scoring machine from the control panel. Main motor sliding table saw 5.5KW (7.5 HP) (4000/4800/6000 rpm adjustable) Scoring motor sliding table saw Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

with electric width adjustment You kenned us call or write. We can speak and write German and Russian. You can also send messages in English. 38.1.2.

With scoring machine G9rbd8z7f Slot 3100 mm right slot 1250 mm Carriage length 2800 mm Motor power 5.5 kW Power of the counter saw motor 0.75 kW Hydraulic turning of the saw, lifting You can call or write to us. We can speak and write German and Russian. You can also send messages in English 38.2.1

Description: Saw blade diameter: approx. 200 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,200 mm

Description: Fabrication number: 63.103/84 Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 24 V Working length: approx. 1300 mm Saw blade diameter: approx. 250 mm Incl. hydraulic unit from the manufacturer REXROTH Incl. batch of different saw blades weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,100 x 1,800 mm

saw blade diameter: 350 mm, cutting range 90 degrees: round: 120 mm, weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,850 mm

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Segment saw blade: 400mm x 4mm x 50mm. Working range: round material 90°/45°: 130mm, square material 90°/45°: 120mm/110mm, flat material 90°/45°: 305mm x 20mm/245mm x 30mm, U-profile upright 90°/45°: 120mm x 55mm, U-profile horizontal 90°/45°: 240mm x 85mm/180mm x 70mm. Cutting speed with saw blade 400mm in m/min: 13/26 or 10/20 or 15/30. Feed rate: 0-3300mm/min. Dimensions X/Y/Z: 800mm/1070mm/1780mm, weight: approx. 850kg. Available from June, 2024. Documentation available. On-site inspection is possible.

Circular tester for crankshafts, camshafts, rotor shafts, etc. Reworked. Tip width 440 mm Peak height 200 mm Bed re-ground. Device repainted Dimensions: LxWxH 1000x600x1100 mm Weight approx. 300 Kg Colour: Light grey

Basic refurbished belt circular operator SBR 2500 New chassis made of stainless steel New tapes New electrics Mehler Completely disassembled and rebuilt. 6 Month Warranty Immediately available

10 piece blade 80 x 40 x 1 mm (or 70 x 40 x 1) mm for belt cutting machine. NEW. Larger quantities available!

Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Fully hydraulic curved roller Shear make PARX type KRS 2Machine -No: 3728 Series 61/72, year of construction 1973Shearing power b. 40 kg / mm2 strength: 6 mmShearing power b. 70 kg / mm2 strength: 4 mmProjection between stand and knife: 1050 mmStand opening height: 300 mmmin Curve radius: 75 mmmin. Rondendiam.:290 / 180 mmMax. Rondendrm. from 4-corner sheet: 2750 mmminute Flaring rim: 450 mmMax. Beading height: 50 mmMax. Beading radius: 35 mmCutting speed stepless: 0 - 12 m / min.Power requirement: 6 hpWeight: 1.85 t (without mandrel centering)Outside dimensions: 3000 x 900 x 2000 mm(without mandrel centering)With- full hydr. drive- graduated Speed control- Const. Starting and working torque- Automatic workpiece feed- Contour cutting (cropping)- Circular section- Spiral cut- Beading- with adjustable Thorn centeringused, from operational resolution, in good conditionPrice on request.Deliv ...

Circular shears make PARX / KUNZ type KSM / 2 / schMachine -No: 3756 built in 1975Technical specifications:Shear capacity 40 kg / mm2 4.0 mmShear capacity 70 kg / mm2 2.5 mmProjection 380 mmGuide curve projection 750 mmgr. round square sheet metal 1000 mm gr.Ronde octagonal sheet metal 1250 mm Flare diameter max. 400 mmFlare height max. 30 mmFlaring radius max. 20 mmCutting speed 15/30 m / minDrive power 2.5 / 3.0 kWWeight approx. 2500 kgDimensions 3600 x 500 x 2200 mmWeight approx. 2500 kgWith- automated with hydr. Adjustment of the circle center point guidancefor different diameters and material tension in the center- complete electr. Facility- Inclined lower knife shaft- swiveling control panel- hydr. Infeed of the upper tool for scissors and guide arch- hydr. Guide arc swivel device- various cutting wheelsused, in good conditionPrice on request.Delivery: ex warehouse or  ...

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7500 € : 154.5 € : 2 mm : 700 mm : 1,1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...

Circular feeder,stainless steel,in noise cancelling cabinet,Ø 580 mm.

Circular table,Soco,galvanized,with plastic plate,Ø 1200 mm.

Circular table,stainless steel,standing on legs,Ø 1000 mm.

table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in excellent condition, 12 integral drops 36 LGL e-compact power supplies

Manufacturer Jumberca Model TLJ6 E+ Machine in good condition

Circular loom ALBI 10 gauge - type RFH11 YEAR 1989 PLATEN DIAMETER 203 MM. Number of needles 444.

Santoni SM-DJ2T Circular knitting machine There are 3 machines available(Price is for one machine) Machines are in good condition

Circular knitting machine in perfect working order 18 full drops. 54 IRO feeders