We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,981 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Name: Glass cutter Type: Silver cut No. 550.0 Manufacturer: Bohle-Werkzeugfabrik Condition: used Components: - 1 x base cross (complete with 2 x suction cup, base rail, cross rail) - 4 x clamping piece with suction cup - 4 x extension rail 100 mm - 2 x extension rail 200 mm - 1 x cutting ruler - 1 x slider for small ellipses - 1 x slider for large ellipses - 1 x silver cut glass cutter no. 425.1 with ball-bearing wheel carrier Note: There are no 400 mm extension rails included! Application: - for circular and elliptical cut-outs made of glass plates Original price: 380,00 € tax excl. Price: 239,00 € (VB) plus VAT ex location Grunow (Brandenburg) (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted. ...
used
cutting capacity 90 mm, 100 x 70 mm, Machine already ready for transport, machine can be viewed on viewing day for correct assessment.
used
used
used
adjustable 50°-0-50°; equipped with pneumatic power supply; 2 button control
used
Unused
used
used
including additional saw blade
used
used
Kaltenbach KKS 400 Dia saw / abrasive - disk : 400 mm Sawclampspeeds: 30--260 m/min Length : 1040 mm Depth : 965 mm Height: 1650 mm Weight: 850 kg
used
cutting depth at 90°: 85 mm cutting depth at 45°: 54 mm max crosscut with slide table: 815 mm table: 760 x 760 mm manual backgauge 2 pneumatic cylinders for clamping workpiece Dia saw / abrasive - disk : 250 mm Turningspeeds: 5130 rpm Power needed / motorpower: 3 HP
used
used
Miter capacity: 90 Degrees round: 80 mm. 90 Degrees square: 70 x 70 mm. 90 Degree rectangle: 100 x 60 mm. 45 Degrees Round: 70 mm. 45 Degrees square: 60 x 60 mm. 45 Degree rectangle: 70 x 60 mm. -Refrigeration.
used
18a, 50hz, equipped with Rapid 1 electronic E190 digital length gauge and transport / discharge belt, pneumatic power supply. Blade adjustable 45 degrees; Pay attention Pick up 2nd day of delivery
used
Unused
used
used
v.v. clamping device; incl. supply/output roller conveyor; web width approx. 285 mm
used
used
Default. -Low-speed suitable for stainless steel.
used
Lifting arm aborted with damage
used
Saw is rotatable rotatable,
used
Multi-blade saw, sawing machine, multi-saw SCM M3 Working height 110 mm Min. length of workpiece 250mm Engine power 35 HP Min/max saw blade 200/350 mm Spindle diameter 70 mm Chain width 300mm Infinitely adjustable feed speed from 6-48 m/min Speed 4200 rpm Extraction connection 200mm Transport dimensions 1800x1800x1500mm, weight 1700kg
used
Sliding table saw Philip Constant Year of construction 1994 Trolley 3800mm Main engine 5.5kW Scoring unit 0,75kW 45 degrees tiltable 400V Electric High/Low
used
Including inlet/discharge table
used
used
Sliding table saw Winter MJ6132TYA Year of construction 2007 Trolley 3200mm Front zipper 45 degrees Saw blade shaft hole 30mm Front zipper 0,75kW Main engine 5.5kW Transport dimensions 3400x1500x1500mm, weight 1050kg
used
Underlying radial arm saw Stromab TR 350 Year of construction 2003 Motor 3kW Saw blade 350mm Cutting capacity 210x30mm_200x50mm_150x80mm Roller conveyor 3000mm & 2500mm Dimensions 7000x1000x1300mm, weight 250kg
used
used
used
Double clamp. 2 Speed level 1 for steel, level 2 for non-ferrous/plastic.
used
used
used
Sliding table saw with defective on-off switch, trolley
used
Sliding table saw Schelling SKB Machine nr 1230-14 Trolley 3000mm Saw blade max 400mm Front zipper 45 degrees Transport dimensions 3200x1700x1500mm, weight 800kg
used
2.2 kW. -Both vertical and horizontal cutting. -Cutting depth: approx. 5 cm. -Length of movement: approx. 250 cm. -Height displacement: approx. 140 cm. -Suitable for plate of: 244 x 122 cm. -Extraction at the back, dust bag, see photo 9. -Total size: approx. 332w x 100d x 206h cm. -Incl 1 fine and 1 coarse saw blade.
used
Complete with dust extraction, extra bags and saw blades.
used
Casolin Astra 3000 Year of construction 1991 Trolley 3000mm Main engine Scoring unit 45 degrees tiltable 400V
used
Including roller conveyor 170x55x91 cm. Without extraction, only flexible pipe!
used
Not tilt-adjustable
used
in a suitcase
used
Equipped with Siemens Simatic HMI touchscreen.
used
Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake
used
SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked
used
Grundfos circulating pump UPS 32-120 F 220 for sale, with original packaging
used
Circular knitting machine RIBANA model PLXR2B/C 34.18GG.60F feed system Lyera 8 MER
used
Circular knitting machine RIBANA Circular knitting machine RIBANA model PLXR2B/C 34.18GG.60F feed system Lyera 8 MER 2002
used
In production line. Available to see it in person in Portugal
used
In production. Available to see in Portugal. Good condition.
used
Jersey circular knitting machine. Available to see in person in Portugal. Perfect conditions.
used
Mayer MLBF for sale. Perfect conditions. Contact for more info. Available in Portugal