chucks used for sale

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -without: interchangeable jaws -Chuck size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Beeks: soft -Chuck size: Ø 200 mm -Weight: 22 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg

Centrifugal quick-release chucks, centrifugal chucks, three-jaw chucks -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Number: 2x feed available -Price: per piece -Weight: 6 kg/piece

Centrifugal quick-release chucks, centrifugal chucks, three-jaw chucks -Outer: Ø 270 mm -Clamping range: Ø 90-140 mm -Take: Ø 140 mm -Hole circle: Ø 170 mm -Weight: 25 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Centrifugal quick-release chucks, three-jaw centrifugal chucks -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -aper cone: Ø 62 mm -Hole circle: Ø 82 mm -Number: 2x feed available -Price: per piece -Weight: 6 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -with: trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

Description: Rotary chucks, diameter fi 400mm, 3 pieces weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

Description: A total of 3 jaw chucks including clamping jaws, different diameters , weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 300 mm

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Plan disc Bison New in original packaging

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Three-jaw chuck diameter 240mm

Original packs a set

Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

Chuck diameter: 1400 mm Chuck bore: 800 mm Number of jaws: 8   Horizontal:  Horizontal Diameter:    1400mm Centre height:800mm Length:      1400mm Width:       1200mm Height:      1400mm Weight:      2500kg

Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !

Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Transfer: as is -Chuck size: Ø 200 mm -Hole circle: Ø 134 mm -Weight: 20.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up