chip used for sale

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

x-travel: 2.940 (2x 1.220) mm y-travel: 500 mm z-travel: max. 800 mm Control: TNC 426/430 Heidenhain distance spindle nose and table: V: 0 - 770 mm distance spindle nose and table: H: 180 - 980 mm Main spindle:: turning speed range - main spindle: 80 - 8.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 191 Nm spindle diameter in front bearing: 70 mm swivellable: +/- 90 ° tool taper: SK 40 work table:: table surface area: ca. 3.340 x 650 mm T-slots: 14 H9 mm max. table load: 600 kg Tool-Presetter:: number of toolpositions: 22 pos. tool taper: SK 40 change-time tool to tool: 5 sec change-time chip to chip: 9 sec max. tool diameter: 85 mm max. tool-dia with free toolbox: 135 mm max. tool length: 400 mm max. workpiece weight: 8 kg feeds:: rapid traverse ( X / Y / Z ): 25 / 25 / 20 m/min Feed x / y / z: 1 ... 9.999 mm/min feed power: 9 kN total power requirement: 69 KVA weigh ...

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 10.000 min/-1 power capacity - main spindel: 7 / 9 kW tool taper: ISO 40 spindle bearing diameter: 70 mm measuring system: direct Resolution: 0,001 mm swiveling-rotary-table:: table surface area: Ø 280 mm max. table load: 250 kg Swivel range: +/- 110 ° rotatable: 360 ° Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 (125) mm change-time chip to chip: 5,5 sec feeds:: rapid traverse ( X / Y / Z ): 35 / 35 / 35 m/min feed speeds: 1 - 30.000 mm/min Feed force: 6 kN total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2,8 m Documents: chip tray: Coolantsystem: hydraulic system: test probe: TS 632 elektr. hand wheel: Automatic Tool Changer: 30 pos. full splash guard: 5  ...

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: 840 D sl ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 20 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: max. 30.000 mm/min Feed force: max. 5 kN total power requirement: 23 kVA weight of the machine ca.: 4,5 t dimensions of the machine ...

x-travel: 510 mm y-travel: 510 mm z-travel: 460 mm control: Mazatrol Fusion 640M Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 22 / 15 kW tool taper: ISO 40 Spindle diameter: 80 mm Accelaration: 0 - 12.000 min/-1 : 1,7 sec table surface area: 500 x 400 mm T-slots: 5 x 18 mm T-slot - distance: 80 mm distance spindle /table: 190 - 650 mm max. workpiece height: 500 x 500 x 405 mm max. table load: 300 kg Swivel range A-Axis: +30 / -120 ° rotation range c-axis: +/- 360 ° Tool-Presetter:: number of toolpositions: 40 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg change-time chip to chip: 4,5 sec feeds:: feed speeds: X/Y/Z: 1 - 50.000 mm/min rapid traverse: X/Y/Z: 50 m/min Indexing: A + C: 0,001 ° switching time: 90°: A/C: 1,9 / 1,5 sec total power requirement: 51 kVA weight of the machine ca. ...

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 mm capacity 45 degrees: square: li. 250 mm capacity 45 degrees: flat: li. 270 x 200 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: 330 x 260 mm motor: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size ...

CNC control: Siemens SINUMERIK 828D incl. OPERATE, 10.4" screen -Spindle cone BT 40 -24-fold tool changer -Coolant device 10 bar incl. coolant gun -Internal cooling with 20 bar -Warning light with 3 colors -Chip conveyor, ejection from the side -Electric handwheel -Air pistol -LED workspace lighting -Oil skimmer with endless belt -DXF Reader -Advanced operating functions -CE conformity -English machine manuals -Blum Workpiece and Tool Measurement Technical specifications of the SMEC PCV 430 Workspace X-axis travel: 700mm Y-axis travel: 430mm Z-axis travel: 510mm Table size: 750x420 mm Distance table – spindle nose: 130-640 mm Table load: 560 kg Final drives Feed motor X/Y/Z axis: 3 kW Rapid traverse X / Y / Z: 48/48/36 m/min Feed X / Y / Z: 1-20,000 mm/min Spindle Spindle motor: 11/20.4 kW Torque: 95.5/130 Nm Speed: 10,000 min-1 Tool magazi ...

x-travel: 650 mm y-travel: 560 mm z-travel: 650 mm table surface area: 400 x 400 mm control: Fanuc 18i-M spindle turning speed range: 120-12000 U/min : ja/yes hand wheel type of pallet-changer: 2 Cooling through the spindle: 10 bar chip conveyor: ja/yes feed: 670 mm/min distance work spindle /surface of the table: 800 mm table load: 400 kg toolpiece magazine: chain magazine: 60 BT 40 b-axis: 360 1° rapid traverse:: 40 m/min feed: 1-40.000 mm/min tool changing time: 1,3 sec tool/tool tool changing time: 3,8 sec chip/chip total power requirement: 22,4 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END  ...

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03920 Type of machine Machining Center - Vertical Make MORI SEIKI Type NV 5000 B / 40 Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time on request Freight basis ex location Technical details x-travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm Control FANUC MSG 501 turning speeds 12000 rpm tool change unit 30 table-size 1100x600 mm Drive 18,5/11 kW tool taper BT 40 transmission ratio 1 spindle diameter in front bearing 65 mm table load 1000 kg T-slots 6x18x100 mm distance spindle /table 150-660 mm max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool weight 8.0 kg Change-time tool to tool approx. 1.0 sec Change-time chip to chip approx. 2.6 sec Rapid Traverse 42 m/min feed speeds 1-6000 mm/min total power requirement 48 kVA Weight of the mac ...

roll diameter: 400 mm throat: 420 mm workpiece height: ca. 220 mm table-size: 600 x 600 mm cutting speed: 12 - 375 m/min saw band length: 3160 - 3260 mm saw band width min./max.: 3 - 12 mm total power requirement: 3,6 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 0,6 x 1,0 m Optical condition: very good: Mechanic: very good: Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: New castors Emergency stop Both doors electrically locked Swivel table Circuit diagram has been redrawn Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: Machine overhauled in 2023 New castors Emergency stop both doors electrically ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and  ...

Brand gurutzpe Model a 1000 Reconstruction year 2019 Cnc fagor 8055 conversacional Technical details Travels travel longitudinal Z 3000 Travel longitudinal Z 640 Max. Diam. Turning over slideways 1100 Max. Diam. Over carriage 800 Distance between slide ways 685 Spindle Axe of spindle asa 11 Chuck diameter 630 Chuck clamping hidraulic Diam. Of principal axe 105 Cone morse 6 Gear of speed 2 gear Geautoatic change system hidraulic Max. Speed 1200 r.P.M. Main engine 60 kw Advances Workin advance 1000 in x 2000 in z Fast advance 6000mm/min Tail stock Tail stock axe diam. 140 Tail stock axe travel 300 Tail stock axe travel system hidraulic Cone morse 6 Turrets Number tools fo vertical turret 4 Number tools of horizontal turret 8 Max weight of piece Kg Between points 7000 Air with center of gravity 250mm 2000 Weight of machine Net weight 13.000kg Lay-out Hei ...

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

axis stroke (X,Y,Z): 4062, 2,922,660 mm Number of spindle head vertical: 13 St. Number of spindles head horizontal: 6 St. Number of tools: 27 St. Number of milling agregates: 1 St. working dimensions: 3200,1500,200 mm Motor output: 12 kW control: BECKHOFF MASTERWOOD Project 385 (Winner) ------------------------------------- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----------------------------------------------- Workspace: X = 3200mm , Y = 1500mm, Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible  ...

Key data: 730 , 730 , 880

CNC controller: M730UM (CELOS) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 B-axis degrees: 360º (1º index) Distance spindle nose - table surface mm: 70 - 950 Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 37/22 (10/100 %ED) Spindle torque Nm: 250/104 (10/100 %ED) Cooling Cooling through the Spindle Center bar: 15 Tool system Tool holder: SK-40 Tool magazine slots: 40 Max. Tool Diameter With free neighboring places mm: ø170 With occupied neighboring places mm: ø70 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,5 Equipment Chip conveyor Infrared probe Signal lamp High pressure pump Tool breakage probe Working ...

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool mo ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,5 s NC-Rotary table:: table diameter: 1.100 x 900 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 40 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 69 kVA weight of the machine ca.: 16,8 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: 40 pos. Chip conveyor: test probe: Heidenhain ...

x-travel: 450 mm y-travel: 600 mm z-travel: 330 mm control: iTNC 530 Heidenhain Main spindle:: turning speeds: max. 18.000 min/-1 power capacity - main spindel: 31 / 17 kW max. Torque: 98 / 54 Nm tool taper: HSK A63 swiveling-rotary-table:: rotary table dia.: 320 mm Swivel range: A: +/- 135 ° rotatable: C: 360 ° max. table load: 300 kg Number of revolutions: A: 25 / C: 40 rpm T-slots: 4x 14H7 Tool-Presetter:: number of toolpositions: 55 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8,0 kg max. total weight: 220 kg change-time chip to chip: 4,5 sec feeds:: Accelaration: 8 m/sec² Feed force: 4,5 kN rapid traverse ( X / Y / Z ): 30 m/min total power requirement: 40 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: NC-Rotary Swiveling Table: Automati ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

CNC turning center with 6-axis Mitsubishi robot arm (robot cell) - Machine can be tested under power Specifications: Manufacturer: Mazak Model: QTG-50 SG Control: Mitsubishi M80 Year of construction: 2019 Properties: oscillation diameter: 470 mm oscillation diameter over Feed size: 100-135 mm rod diameter: 32 mm workpiece weight for shaft parts: 20 kg workpiece weight incl. chuck with suitable clamping force and stiffness of the feed: 20Kg Distance spindle nose - tool holder slide 105 to 340mm Main spindle: speed 7,000 min-¹ Min. speed 35 min-¹ Gearbox gradation Continuously variable Spindle nose H6 flat, 115 mm diameter. spindle passage 45 mm 30 min. rated power 7.5 kW B3lphazt0t TOOL REST: Tool rest type Tool holder slide Number of tools: 6 Tool dimensions (turning tool): 16x16mm Tool dimensions (drilling tool): 20 mm diameter Feed axles Rapid tr ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 t total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5x4x3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program Milling in single-part process - Sw ...

Control : Siemens SINUMERIK 840C • Spindle Taper: SK 40 • Magazine: 32 sets • Atc: UMBRELLA TYPE • Table Size: 400 mm x 400 mm • Pallet Changer: Available: Double Pallet • Travel X: 500 mm • Travel H: 500 mm • Travel Z: 500 mm • Table: B Axis: 0.001 Degree (Precision Rotating) • Power Shaft Motor: 35 KW • Spindle speed: 18000 rpm • Cooling through Shaft: Available • Chip conveyor: Available this extra information is standard for this model. Please always double-check the details during a visit The Deckel Maho 50 H is a precision machining center renowned for its exceptional performance and versatility. Manufactured in 2004, this horizontal machining center is equipped with advanced features and capabilities to meet the demanding requirements of modern machining operations. Controlled by the Siemens SINUMERIK 840C system, the Deckel Maho  ...

CNC controller: MSX-501 Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 620 B-axis degrees: 360º (0,001º index) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 400x400 Maximum workpiece size (D x H) mm: ø630x900 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 18/11 Cooling Cooling through the Spindle Center bar: 50 Tool system Tool holder: CAT-40 Tool magazine slots: 60 Max. Tool Diameter With free neighboring places mm: ø140 With occupied neighboring places mm: ø70 Max. Tool Length mm: 400 Max tool weight kg: 8 Tool-to-tool time s: 0,9 Chip-to-chip time s: 2,8 Equipment Chip conveyor Basic machine dimensions / weight Length mm: 4.004 Width mm: 2.397 Height mm: 2.711 Weight kg: 9.600

x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm Control: MSC 502 distance spindle center to table: 50 - 650 mm distance Spindlenose and center of table: 100 - 610 mm Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 22 / 18,5 kW tool taper: MAS BT-40 spindle bearing diameter: 70 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiecediameter: 580 mm max. workpiece height: 650 mm b - axis: switching time: 90°: 2,5 sec change time of pallets: 6,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT-40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg change-time tool to tool: 1,5 sec change-time chip to chip: 3,7 sec feeds:: rapid traverse ( X / Y / Z ): 32 m/min feed speeds: 1 - 24.000 mm/min Tipp feed: 0 - 1.260 mm/m ...

Key data: 600 mm, 200 mm

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Double-sided planer copper mill DOIN- VUIN 605 year of construction 1975 S/N 3310 Manufacturer Kupfermühle woodworking machines Working width / maximum width 600 mm Working thickness: 200 mm chip removal max 20mm ( upper shaft ) chip removal 12mm ( under shaft ) Shortest piece length 350mm Technical equipment: from above: toothed draw shaft Toothed Pull Shaft 2 PCs 4-blade planner shaft, 605 mm, 15 kW from below: Table top, adjustable Traction shaft, smooth-running, adjustable 4-blade planner shaft, 600 mm, 11 kW 2 adjustable tables/pull roller in the lower table top Electric height adjustment Lift motor a ...

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

x-travel: 5.000 mm y-travel: 3.750 mm z-travel: 1.250 mm Control: iTNC-530 HSCI table-size: 5.200 x 2.200 mm distance between columns: 3.000 mm feeds: 50.000 mm feeds: 30.000 mm/min milling head: 0.001º/0.001º tool taper: DIN 69871 AD 50 number of spindle speeds: 6.000 U/min/rpm transmission ratio: 3 spindle drive: 43 kW tool change unit: 20 - fach ( Vertikal) Internal cooling system: 20 bar Chip coveyor: 2 handwheel: HEIDENHAIN HR-520 total power requirement: 122,89 kVA weight of the machine ca.: 33 t Measuring system: M&H PS 20.41 Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in th ...

x-axis: 3200 mm y-axis: 3400 mm z-axis: 1200 mm Control: Heidenhain iTNC 640 total power requirement: 65 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 10833 x 6680 m Technical data: Travel paths Longitudinal travel / X-axis 3200 mm Cross travel / Y-axis 3400 mm Vertical travel / Z-axis 1200 mm Table clamping area 3000 x 2400 mm T-slots 13 x 28 x 180 mm Max. table load 11000 kg Spindle Motor power S1/S6-60%/S6-25% 32/43/53 kW Max. torque S1/S6-60%/S6-25% 819/1100/1356 Nm Spindle holder BTT 50-BIG PLUS Max. spindle speed continuously 6000 1/min. 2-stage gear drive / HAMADI KOKI - Japan Distance spindle nose - milling table 350 - 1550 mm Distance between stands 2800 mm Feeds Max. working feed 7000 mm/min. Rapid traverse X/Y 12000 / Z 15000 mm/min. General information Installation area with chip conveyor 10833 x 6680 mm Height 5702mm Net weight of the machine with access ...

This 4-Axis milling machine was manufactured in 2016. The DMG MORI DMF 260-11 KGT offers exceptional precision and efficiency. With a rapid traverse of up to 80m/min and optimised tool exchange times, it maximizes productivity. Notably, it boasts a 15% greater chip removal volume and reduced chip-to-chip times. Its sturdy construction and mineral composite bed ensure stability and rigidity. This DMF series machine represents a remarkable opportunity for machining tasks. Contact us for further details.

Description: Control and Machine Number Control: SIEMENS Sinumerik 840 D Machine no.: 14351 Travels and Axes Travel X-axis: 1450 mm Travel Y-axis: 1100 mm Travel Z-axis: 1300 mm B - axis: NC rotary table Pallet dimensions & Pallet changer Number of pallet places: 2 , Pallet dimensions: 1000 x 800 mm Feeds & Spindle Rapid feed X,Y,Z: 60 m/min Working feed: 1- 60000 mm/min Feed force max. X|Y|Z : 20|18|20 kN Spindle speed: 20 - 6000 rpm Tools & Tool changer Tool holder: SK 50 Chip to chip time: approx. 5 sec. Tool change places: 180 General data Coolant system Chip conveyor Please have a look at the technical data in PDF format . z-motion: 1,300 mm, change time of pallets: 5 sec, x-motion: 1,450 mm, y-motion: 1,100 mm, control: SIEMENS Sinumerik 840 D, numbers of pallets: 2, taper: SK 50, toolchanger positions: 180, turning speed range: 20 - 6000 rpm ...

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:1050 mm y-travel:850 mm z-travel:970 mm distance spindle nose and table:100-950 mm distance spindle center to table:100-1070 mm table height over floor:1300 mm pallet table size:630x630 mm max. workpiece weight:1200x2 kg table - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mm spindle speeds:10000 1/min spindle drive:30/25 kW spindle speed steps:2 spindle nose:50 SK/BT rapid speed:50 m/min feeds:1-20000 mm/U tool taper:50 SK/BT Tool changer:60 fach tool diameter:125 mm weight of tools max.:25 kg workpiece length:610 mm number of pallets:2 weight of the machine ca.:21600 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:15 bar CNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von  ...

x-travel:610 mm y-travel:580 mm z-travel:580 mm distance spindle nose and table:70-650 mm distance spindle center to table:80-660 mm table height over floor:1150 mm pallet table size:400x400 mm max. workpiece weight:400x2 kg table - indexing:1° (optional 0,001°) spindle speeds:12000 1/min spindle drive:22/25 kW spindle speed steps:2 spindle nose:40 SK/BT spindle bearing diameter:75 mm rapid speed:60 m/min feeds:1-20000 mm/U tool taper:40 SK/BT Tool changer:60 fach tool diameter:75 mm weight of tools max.:12 kg workpiece length:410 mm number of pallets:2 compressed air volume:400 l/min coolant tank:550 l hydraulic tank:30 l lubrication tank:2 l total power requirement:45 kva weight of the machine ca.:9500 kg CNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:20 bar Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar ...

x-travel:1200 mm y-travel:1000 mm z-travel:1000 mm distance spindle nose and table:100-1100 mm distance spindle center to table:200-1200 mm table height over floor:1350 mm pallet table size:800x800 mm max. workpiece weight:1800x2 kg table - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mm spindle speeds:10000 1/min spindle drive:30/25 kW spindle speed steps:2 spindle nose:50 SK/BT rapid speed:50 m/min feeds:1-20000 mm/U tool taper:50 SK/BT Tool changer:60 fach tool diameter:125 mm weight of tools max.:25 kg workpiece length:610 mm number of pallets:2 weight of the machine ca.:26000 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:15 bar Servo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:v ...

x-travel:710 mm y-travel:680 mm z-travel:680 mm distance spindle nose and table:70-750 mm distance spindle center to table:80-760 mm table height over floor:1150 mm pallet table size:500x500 mm max. workpiece weight:500x2 kg table - indexing:1° (optional 0,001°) spindle speeds:12000 1/min spindle drive:22/25 kW spindle speed steps:2 spindle nose:40 SK/BT spindle bearing diameter:75 mm rapid speed:60 m/min feeds:1-20000 mm/U tool taper:40 SK/BT Tool changer:60 fach tool diameter:75 mm weight of tools max.:12 kg workpiece length:410 mm number of pallets:2 compressed air volume:400 l/min coolant tank:550 l hydraulic tank:30 l lubrication tank:2 l total power requirement:45 kva weight of the machine ca.:12200 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:20 bar CNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 ba ...

x-travel:850 mm y-travel:700 mm z-travel:500 mm turning speeds:10.000 1/min tool taper:SK 40 control:iTNC 530 HEIDENHAIN tool change unit:38 round table:2 x D 280 mm spindle:32 / 17 kW spindle:159 / 107 Nm rapid traverse:45 m/min total power requirement:43 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:2,4 x 3,2 x 2,9 m 5-axis machining center, NC-round-swivelling configuration dual round tables dia. 280 mm 3 D touchprobe RENISHAW, chip conveyor, tool-changing time (chip to chip) approx. 4,5 s, internal coolant supply thru spindle (40 bar / 600 liter), el. thermal compensation, airblast through spindle, el. handwheel, approx. 62.500 hours "machine on", approx. 19.900 hours "spindle on"

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

ertikal machining center, used, from location vertical machining center, used, Model/ model: VS 500 SPEED Fabr./ make: NORTE Year built/ year: 1999 Control/ control: SIEMENS 840D x-Way /x-travel 2000 mm y-way / y-travel 500 mm z-way / z-travel 500 mm Feed: 1 - 8000 mm/min Table size / table-size 2120 x 550 mm Table load / table load 2000 kp Rapid gear X-axis / rapid traverse X-axis 40 m/min Rapid gear Z-axis/ rapid traverse Z-axis 20 m/min Tool holder / tool taper HSK 63 A Spindle speeds - infinitely variable/ spindle turning speed 0 - 15000 rpm Spindle drive/spindle motor 20 kW Spindle bearing diameter / spindle bearing diam. 70 mm Position accuracy / position accuracy: 0.020 mm Control SIEMENS 840D Tool diameter: 63 / 126 mm Tool Magazine: Chain Magazine/ toolpiece magazine: 40 pieces Total power requirementm.65 kVA Machine w ...

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg