We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,420 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108
used
Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.
used
Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.
used
Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108
used
Ultrasonic insulator ATS US 2100 AB; good condition; serviced and tested at ATS Germany; Bandwidth 100mm; Frame 430x205mm; suitable for paper or foils. Ultra sonic banding machine ATS US 2100 AB; good condition; checked by the support of ATS Germany; band width 100mm; frame 430x205mm; used for paper or foil.
used
Electrostatic insertion 100 KV, with conveying and dosing air control. Function Checked . Suitable for automatic and hand guns.
used
Prati Vega Plus LF330 CNT Slitter / cutter / rewinder with inspection and label checking Age: 2011 Unwinder Rewinder Slitting Unit 1 x Flexoprinting Unit - Varnish UV Dryer 2 x Rotary Die-Cutting Unit Sheeter Perforation Unit Cores: 25 mm, 40 mm, 45 mm, 50mm, 76 mm - wall thickness 3mm Material width paper and film: min.: 150 mm / max.: 340 Print width: max. 310 Printing capacity: Punching only max. 200 m/min., printing max. 70 m/min. max. roll Ø - down: 1000 mm / max. roll Ø - up: 400 mm Punching width: max. 320 mm Slitter / cutter / rewinder with inspection and label checking. Unwind with tension control and single edge guiding. Pneumatic bars on the splice tables for changing rolls. Color touch screen operation for all functions, programs and jobs. For automatic non-stop rewinding (3-sp ...
used
CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...
used
Our Pfeiffer Vacuum HiPace 2300 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 2300 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
used
Mettler Toledo labelling equipment., More information soon.
used
Our Pfeiffer Vacuum HiPace 700 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 700 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
used
Thread measuring gauge, thread ring gauge, thread gauge, thread snap gauge, thread snap gauge, thread check gauge, border snap gauge -Measuring range: M27 x 1.5 mm -Weight: 0.7 kg
used
Bread cutting machine Jac BEM 450/10 -Bread cutting gates -10mm cutting width -semi-automatic -400 Volt 50Hz -Weight 164kg Function checked Shipping by forwarding company possible, costs depending on the postcode.
used
The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...
used
Thread measuring gauge, thread ring gauge, thread gauge, thread snap gauge, thread snap gauge, thread check gauge, border snap gauge -Measuring range: M24 x 1.5 mm -Weight: 0.7 kg
used
ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process, the labels can be checked for quality and missing labels. Specifications: Max. web width: 330 mms Roll diameter: unwind: 700 mms / rewind: 400 mms Shaft diameter: unwind: 76 mms / rewind: 76 mms Max. speed: 230 m/min. Slitter Rewinder Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die- ...
used
Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !
used
Colour mixer Busch FM 5; good condition; cleaned and tested; Capacity max. 5kg; adjustable up and down movement. Ink Mixer Busch FM 5; good condition; cleaned and checked; max.capacity 5kg; up and dowm movement of thje ink.
used
Manual continuous scale Rhewa; good condition; cleaned and tested; Max. Load capacity 150kg, min.1kg; Division 50g; with forward roller conveyor 1.90m; Width 510mm. Flow scale Rhewa; good condition; cleaned and checked; max.weight 150kg, min1kg; division 50g; with infeed roll conveyor 1.90m; width 510mm.
used
Automatic program Safety guard 1 standard L knife length 320 mm Finger cut equipment :3 tools diam. 18, 20, 24 mm Machine checked and cleaned.
used
MPS EF330 Servo Flexographic Label Press Age: 2004 Automatic register control Web width: 330mm Servo unwind BST Electronic web guide Vacuum web cleaner 8 x Servo Driven Flexo Print Stations 8 x UV dryers 8 x water cooled chill rolls 2 x Rotary Die Stations Waste Rewind Edge Slitting Unit Rewind BST camera system To include: Magnetics: 80z, 96z, 100z, 104z, 108z, 116z, 124z Print tooling: 7 x 80z, 5 x 96z, 1 x 104z, 6 x 108z, 7 x 116z, 7 x 124z Anilox x 8 Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly) -Online Video Inspection by WhatsApp Video-
used
H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller
new
DH Robotics PGC-50 Gripper Weight: 500 g Payload: 1000 g With a stroke of 35 mm and a payload of 1 kg, the DH Robotics PGC-50 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking and a host of other features, the PGC-50 is the perfect gripper for lightweight collaborative applications. The PGC-50 is easy to set up and comes with plug-ins for most major cobot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-50 is a two-finger electric gripper designed for both industrial and collaborative applications. The award-winning PGC-50 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 35 mm and a recommended payload of 1 kg. With its self-locking function, maximum force limits and other collaboration-oriented features, the DH Robotics PGC-50 ...
used
Prati - Vega Plus LF330 CNT Machine information: Prati converting products are proven in practical applications with selfadhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty slitter/rewinder with missing label checking will rewind rolls on a full automated 3-spindle turret in a perfect register with a max. diameter of 1000 mms and a max. width of 330 mms into smaller sized Rolls. During the process, the labels can be checked for quality and missing Labels. Specifications: Brand / type: Prati / Vega Plus LF330 CNT Age : 2014 Min. / max. web width: 150 - 330 mms Min. / max. paper weight: 90 - 160 gsm Max. roll diameter unwind: 1000 mms Max. roll diameter rewind: 400 mms (300 when in use with the 3 shaft turret) Shaft diameter: unwind: 76 mms / rewind: 40, 50 and 76 mms (3 sets) Max. speed: ...
new
Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.
used
Manufacturer: SOMMERMEYER Filtertechnik GmbH Type: SF 38 Y.O.M.: 1997 Conveyor length total approx. 3000 mm Throw in: approx. 1300 x 400 x 400 mm Ejection height approx. 1300 mm Drive Gearmotor 0.25 kW 220/400 V Coolant pump Brinkmann TB303/300 160 l/min H: 18 m 1.7 kW 230/400 V Total dimensions: approx. 3000 x 1600 x 1700 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
PRATI – VEGA PLUS LF330 CNT Brand / model Prati / Vega Plus LF330 CNT (2008) Type converting machinery Year / SN 2008 / LF 020 HS Code 8441 1010 Description: Slitter Cutter Rewinder with inspection and label checking. Unwind with tension control and single edge guiding. Pneumatic bars on the splice tables for changing rolls. Color touch screen operation for all functions, programs and jobs. For automatic non-stop rewinding (3-spindle turret) and cutting rolls (including 12 roll knives and a bar with 14 fixed knives) in register to smaller size rolls. Waste suction removal. During the process, the labels can be counted (numbers and meters) and checked for quality and missing labels with a missing label system. Size Min. / max. web width: up 150 – 330 mms Min. / max. paper weight: 90 – 16 ...
used
Stacker EBA 551 LT; good condition; cleaned and tested; Cutting length 550mm; Insert height 92mm; Insertion depth 570mm; Side tables; Air table; Light barriers; Replacement knives; digital display with program. Paper cutter EBA 551 LT; good condition; cleaned and checked; cutting lenght 550mm; hight 92mm; depht 570mm; side tables; air table; photo sensor; secound knife; digital display with program.
used
Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...
used
Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.
used
Bakery oven, Wiesheu Dibas 64-L with base and self-cleaning Convection oven Wiesheu Dibas 64L with self-cleaning and base, in-store oven Year of manufacture 2012 Second-hand plant Accessories: Steam Capacitor composed of: Convection oven Wiesheu Dibas 64L The device is used but in very good condition, refurbished for 10 baking trays (60x40) 1 x Base 1x exhaust hood (steam condenser) 2x engine gaskets NEW 2x heating coil seals NEW 1x Water Pump Gasket NEW Menu operation - German, English. Other languages possible. The device is fully functional. The baking station has been checked for electronic and mechanical capabilities. Dimensions: Width 93cm, Depth 93cm, Height 215cm Weight: approx. 400kg Condition: see original pictures Decorative items are not included in the scope of services. The furnace has been cleaned, inspected an ...
used
Bakery oven, convection oven MIWE AE 10.0604 Steam generator with steam apparatus With the following configuration: Oven color: Black MIWE aero type 10.0604 Number of editions 10 Baking area approx. 2.4 m2 Door hinge left Heat-insulating glazing 2-fold heat-insulating glass Colour of the front glass pane black (RAL 9005) FP12 Program Control Mechanical door lock Water meter yes easy clean function yes electrical voltage 400/230V; 3/N/PE 50 Hz Electrical standard Europe Electrical installation of own supply line Temperature display in degrees Celsius Connection cable length 2.5 m Total component power 19,800 kW Plug CEE plug, 32 A Language MIWE manual German Total connected load 20,000 kW Condition: see original pictures Decorative items are not included in the scope of services. The furnace has been cleaned and chec ...
used
Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.
used
Digital program Air table 2 Side tables Light guards 2 Knives Complete cleaned, checked and tested.
used
✓ First installation after HP Refurbishment in July 2019 ✓ Only 2.1 million impressions ✓ 6 colours authorized ✓ White Ink ✓ OFIR Kit ✓ EPM Mode ✓ In-line densitometer ✓ Spare Ink Tank S3 ✓ Thick Substrate Kit for media up to 400 gsm ✓ HP SmartStream Production Pro Print Server IN100T Z8G4 ✓ Software version 15.x ✓ Chiller Unit ✓ Machine is optically and technically in very good condition ✓ Machine was under HP maintenance contract Current Status This machine is a leasing return. The new price of the machine was approximately EUR 300.000,-. The machine was technically checked by the local HP dealer in June 2020 before dismantling and then professionally stored.
used
mechanical emulsion mist separator with filter and fan used Manufacturer: AIR-FRESH-SERVICE Industriefilter GmbH Type: FMN-12 with fan ZIEHL ABEGG RH31V-ZID. DC.1R 1.15 kW 380 V Top condition! Total dimensions: approx. 1800 x 700 x 1050 mm The filter was planned for a dental laboratory. All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications: Brand / type: GALLUS / 510S /Servo driven – like new Age : 2008 – like new Counter : Only 9.424 hour/runs Webwidth : 510mm 5 x Flexo Units 5 x U-Dryer BST Power Scope 300 (Web monitoring system) Unwinder max.: 1250mm Rewinder max.: 1250mm Lamination/Cold foil Turnable Remailing 24" Ben Bunch 500 Cross Cutting Cylinder punching units (lengt ...
used
Enveloper feeder Schneider SF 80; Shed investors; good condition; cleaned and tested; format max.360x360mm, min.100x100mm; Max. Speed. 15000/hr; Height adjustable; optional with delivery belt A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; for option with delivery belt A20.
used
Gallus EMS 410 Servo Flexo Press – 9 colour Age: 2004 SERIAL NUMBER: 410-13S Web width: 420mm Print width: 410mm Sensotec automatic register control Unwind E+L electronic web guide Teknek two-sided web cleaner Arcotec Corona treater 9 x Servo Driven Flexo Print Stations 9 x IST UV dryers 9 x servo driven water-cooled chill rolls Partial rail system Lamination unit 1 x rotary die station with K&B GapMaster) Waste rewind Magnetic die crane and hoist BST Video inspection system Tubescan 100% inspection camera Exit nip with die slot Rewind with 2 rewind shafts Rewind Touch screen operator control panel Anilox: 20 x anilox Print sleeves: 9x92, 9x96, 9x98, 9x100, 7x108, 9x110, 6x115, 8x144, 6x200 Magnetics: 92, 96, 98, 100, 108, 109, 110, 115, 144, 200 Description ...
used
Item: Marel IPM3 X300 Slicer and Portion Cutter Category: Cutter / Slicer Manufacturer: Marel Model: IPM3 x300 Year: 2004 Description: Used Marel IPM3 X300 Slicer and Portion Cutter with: • Stainless steel slicer and portion cutter machine • Rotating blade • Complete w/ laser eye weigher • Volume scanner m. INW3 x 400 • M Series 3000 controls Final verification by Marel This is an ideal machine to cut fish r meat in portions according to a pre-defined weight and dimension Video available
used
1x Jungheinrich reach truck, condition: fully functional, the truck was checked and serviced annually and repaired if necessary - from a food wholesale warehouse fleet with its own maintenance workshop. Incl. charger! Price gross incl. VAT! Shipping possible for an extra charge. - Manufacturer: Jungheinrich - Type: ETV 214 - Reach truck - Drive type: Electric - Load capacity: 1400kg - Lifting height: 5300 mm - Load centre of gravity: 600 mm - Fork length: 1150 mm - Height: 2300mm - Year of construction: 2014 - Hours: 13225 - Battery from 01/2020 - with full free lift, load protection grille & side shifter. Also available as a cold store version! Several identical devices with a lifting height of 5.3m are also available. Miscellaneous Years of construction and operating hours available - just inquire!
used
Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke onestellar; Max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; optional with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.
used
Machine information: Flat screen printing - a printing process with impactScreen printing is the ideal process when high coverage, detail accuracy and colour intensity are required to achieve brilliant, high-quality image effects when decorating hollow glass and body printing. Specifications: Brand/Model: GALLUS T200 Year of construction: 2006 Unwind Rewind 8 x Screenprinting Units 8 UV dryer, air-cooled Max. web width: 200mm Screen Printing webwidth: 175mm 1 Flat die-cutting unit with semi-rotary counter-pressure cylinder Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)
used
Exhaust system, industrial vacuum cleaner, dust extraction with filter and fan used Manufacturer: P. RIES GmbH Type: 280 D Volume flow: 2500 m3/h Vacuum: 28 mbar Waste drawer: 70 litres Cartridge filter: approx. 13 m2 with filter flushing, filter cleaning with fan 2.2 kW 380 V Dimensions total: approx. 550 x 600 x 1850 mm The filter was planned for a dental laboratory. All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Linear unit, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex KTR claw coupling GS24 ...
used
Plus version Size 36 x 52 cm Weko powder spray Conventional dampening Cleaned and checked .
used
Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...
used
Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.
used
ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...
used
2000 Watt Year 1998 with chiller, dust extractor, transformer and all documentation with new turbine and service check