channel used for sale

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

VACUUM PUMP 7,5kW 510m3 Becker SV 500/1 + Cartridge filter + non-return valve SIDE CHANNEL COMPRESSOR SV 500/1 SINGLE-STAGE VACUUM PUMP Side channel fan - ideal pump for MDF In addition, it is equipped with a non-return valve and an external filter with a cartridge. The SV 500/1 is a single-stage regenerative blower that offers high performance in a quiet, touchless environment. 100% oil-free and contact-free, these pumps are maintenance-free, highly efficient, and require only minimal maintenance. SIDE CHANNEL COMPRESSOR Side channel blowers generate vacuum or compressed air for a wide range of industries. In these blowers, the rotor rotates contactlessly, so they are maintenance-free and wear-free. Above the upper and lower parts of the impeller there are separate working channels, thanks to which it is possible to use a single-stage version of the device for high flow ...

Labeling sheets, 5x 10 sheets SIEMENS S7-SmartLabel 2x 6ES7 392-2AX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: petrol, for 16-channel modules 1x 6ES7 392-2AX10-0AA0 ( 6ES7392-2AX10-0AA0 ) Color: petrol, for 32-channel modules 1x 6ES7 392-2CX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: yellow, for 16-channel modules 1x 6ES7 392-2CX10-0AA0 ( 6ES7392-2AX10-0AA0 ) color: yellow, for 32-channel modules New ! Dimensions ( packaging ): 300 x 220 x 30 mm

ID3011 Presto Presses CC40V 4.2 t Channel baling press, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180 Channel baler, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

Finger jointing lines >Wood input lengths 900-6100 mm < >Wood rests the tools move < >availability very high < The only package system in the world that can also process a single board or individual beams. Finger jointing line for vertical and horizontal milling, tine profiles, together with new developments in the clamping stations and the transfer channel on the milling carriage, the MINDA MACH I has the following groundbreaking advantages, high cycle rate, together with 1200 mm milling channel at 40 mm wood thickness running meter capacity approx. 150 running meters / min, very reliable material transport - no fault-prone conveyor rollers, flaps and cross conveyor sections - very high availability - for all cross-sections incl. square suitable - through fully automatic, continuous channel adaptation, single wood milling is possible in extreme cases - this makes the system extremely ...

Cardboard strapper, Mosca, fully automatic. –used-: Price per piece ex location: only 2.950.-€ (net) Manufacturer: Mosca Type: RO-TR 500-4 Year of construction: 2006 ITEM NO.: 80902 Year of construction: 2002 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm Device height: approx. 1.52m Manufacturer: Mosca Type: RO-TR 500-4 Year of construction: 2006 ITEM NO.: 80901 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm 400V, 1.5 kW, 2.5 A SP 213 Manufacturer: Mosca Type: RO-TR 4 Year of construction: 2008 ITEM NO.: 91171 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm 400V, 1.5 kW, 2.5 A SP 010 Condition: good Available: as of now Location: Waldl ...

Control BECKHOFF 1x BK3150, PROFIBUS-DP/FMS Bus Coupler 2x KL1418, 8-channel digital input terminal 1x KL2408, 8-channel digital output terminal 7x KL3314, 4-channel input terminal for thermocouples 1x KL9010, bus end terminal 12 MBaud 24 V DC with DIN rail used, tested ! Dimensions: 203 x 100 x 80 mm

The equipment presented is a weighing line equipped with a weighing machine type VPV45 Duo, it is composed of the following elements: - An elevator belt type goose neck type - An oscillating feed belt - One WEIGMA multihead weigher with double head vibrating lane 2 VPV45 (two channels) - A screened enclosure, with a wicket door access - A touch keyboard to program the weigher - A remote control panel - A remote emergency stop box - A double chute goes up and down - A supply item such as tray - A step-by-step conveyor belt - An electrical cabinet - A checkout support trolley The machine was used very little. Documentation, certificate of conformity, food certification available. The weight range of the weigher is from 10 gr. to 2000 g. The scale is designed for homogeneous size products with a maximum length of 55 mm. The weigher can reach approx 25 weights per minut ...

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, spare parts for vacuum pumps / side channel blowers -Carbon fins/carbon sliders: Art. 901349 00007 (WN124-162) 1 set/7 pcs. -Seal: Art. 00890016500 T3.40-61 1 pc. -Gasket: Art 00570016500 T3.40-104 1 pc. -Filter cartridge: Art. 90952100000 C 76/2 2 pcs. -Price/delivery: complete -Total weight: about 0.6 kg

Manufacturer: Giardina, Type: MOS-Micrwellentrockner, Year: 2008, Control: Programm, Channel width in mm: 1500, Channel height in mm: 2000, Channel length in mm: 2900, Heating zone length in mm: MOS, Thermal output: 30.000 kcal H²O, Damper register - items: 1 Vorlauf 75/55 Grad, Heating battery: 1, Year :2008

Manufacturer: Rippert, Type: HOW TK 8000, Year: 2000, Control: yes, Channel width in mm: 1400, Channel height in mm: 2050, Channel length in mm: 8000, Chain transportation system length in mm: 13.900, Thermal output: 32 kW, Max. air temperature: 30, Damper register - items: 1, Exhaust air m³/h: min 500, Lösungsmittelmenge g/min: 160, Year :2000

Paal 325F channel baler incl. conveyor belt Paal 325F BJ:2008 with. 27,390h operating hours Functional! Gebr. channel baler from the manufacturer Paal for sale. The system has been dismantled in working order and is ready for shipment in our warehouse. The system is offered with a filling belt for feeding the hopper. According to known product data, the total weight of the press including the filling belt is approx. 35t. If you are interested in this facility, please feel free to leave a message via our contact form. Condition: used condition, normal signs of wear present, functional, dismantled. Paal 325F Year of manufacture: 2008 with. 27.390h operating hours, working condition! Here is a channel baler from the manufacturer Paal for sale. The system has been dismantled in working condition and is located in our warehouse ready for shipment. The system is offered in ...

Bondora K08 MS MOR Side Channel Compressor Bondora K08 MS MOR Side Channel Compressors 4 kW 50 Hz 2910 rpm 4.8 kW 60 Hz 3480 rpm More side channel compressors new and used - you can find them in our shop! International shipping costs on request!

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones |  2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle  ...

Used line for smoothing, separation and drying of small-sized objects made of zinc alloy, brass, aluminum, carbon steel, stainless steel and steel. The line consists of: Temper mill vibration made by Ebra, model EVP-RA 315, new 2006: - Tank capacity of 400 L, - Working capacity of 265 L, - Depth 530 mm working channel, - Weight (without charge and cover) 680 kg, - Dimensions: A x H, fi 1320 x 1060 mm Separator made by Ebra, model TM-350 K, new 2006: - Payload 1000 kg / h, - Engine power of 0.37 kW, - The speed of rotation of the drum 21 rpm - Engine speed 142 rpm, - Transmission chain 5/8 " - Dimensions: width 1000 mm, depth 1200 mm, height 1600 mm Vibration dryer made by Ebra, model EVK-350, new 2006: - Drying tank capacity 300 L. - The capacity of the drying agent 100 L. - Width 380 mm working channel, - Weight (without charge and cover) 610 kg - Documentation avail ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Motor power 11kW with double pump Control SPS, supported two-hand operation -with a key-operated switch for control voltage / from Cutting force 2 x 20to Feeding channel working width max width 2500 mm loading channel working height = height = 1535 &gt; mm extended knife steel under-sink reinforced, straight version incl. two openings for forklift loading -Colours: Corpus RAL acc. to customers request Cutter bar &amp; grille Ral1028 / melon yellow delivery time: approx. 12-14 weeks Price and photos upon request

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

Manufacturer: Knauer Year of construction: 2017 Tilting device: Hywema KV 12 Location: Kaiserslautern External dimensions: approx. 2668 x 2140 x 4752 mm Width feeder: 2.25 m Width: Output: 1.95 m Nominal voltage tilting device: 400 V Rated power tilting device: 2.2 kW Motor/pumping hydraulic system: 5.8 l/min; 160 bar; 1.5 kW; 1445 rpm Payload travel trolley: 4000 kg Payload tilting device: 1250 kg Payload vibrating channel: 250 kg/m² Weight of carriage: 2550 kg Weight tilting device: 1450 kg Weight vibrating channel: 1650 kg Mounting: Attachment to the hall floor The conveyor system served as a feed to a continuous washing system in an automotive plant. We will be happy to send you further information and pictures on request!

2 automatic carton strapping strappers with holder - used - : Prices per device (net) from location: 1.950.-€ Manufacturer: unknown Model: unknown Year built: unknown Channel width: 85cm, Channel height: approx. 59cm Device width: approx. 62cm Device length: approx. 1.60m Height treadmill level: approx. 96cm Device height incl. holder: approx. 2,60m Bandwidth: max. 12mm Condition: good Available: from approx. Early October Location: Frankenberg Camp (Saxony)

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

On offer are three Biomek systems by Beckman Coulter; two i5 and one i7 system. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machine's configurations are as follows: BIOMEK i7: Hybrid configuration with one 96-channel 1-300μL pipetting head and one span8 pipetting head that can be operated in either 5-1000μL pipetting mode or in continuous dispense mode. This unit also includes a roof-mounted HEPA unit. first BIOMEK i5 comes with a 96-channel 5-1200μL pipetting head, a side cabinet and an integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head, which can be operated in either 5-1000μL pipetting mode or in continuous dispense mod ...

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 182 kW Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...