cast film used for sale

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Large-Format-Printer sw 36" digital (toner-based) Manufacturer: RICOH Model: W2401 Year: 11/2011 Equipment: 2 rolls, color scanner, print up to 914mm Prints: 4872m² Availability: In stock Defects: if there is a large amount of toner, it casts light shadows, possibly replace the drum and toner. Price: on request

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

The machine is designed to pack products individually, or in batches. OPERATION: After positioning the film on the reel unwinder and adjusting the work table according to the size of the product, the operator manually introduces the product into the film and transfers it to the welding frame. Once welding, the product is evacuated into the shrink tunnel through an ejection mat to retract the film. TECHNICAL: - Model: MATRIX - Power: 10 kW - Weight: 340 kg - Maximum height of the product: 180mm. - Height adjustable welding conveyor. - Pneumatic descent of the welding frame. - Control by push button, or pedal, or cycled operation. - Ejection mat with fixed speed of 7.6 m/min. - Metal mesh tunnel belt with variable speed from 3 to 10 m/min. - Electronic regulator-controlled pulse welding. - Welding blade in high position. - Tunnel temperature regulated by electronic th ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Capacity up to 250 kg/h Melting container capacity 35 kg stainless steel with casting device with vibration table Connection 8.2 kVA Electrical heating resistance 4.5 kW with cooling compressor, coolant R134a Cooling capacity 7.5 kW with touchscreen operation with 1 year warranty, operating errors excluded

PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

EU pallet chassis, heavy-duty trolleys, transport scooters, dray Dimensions: width x length x height (approx. 82 x 122 x 46 cm) 4 heavy-duty roller wheels (2x swivel castors) Very stable steel frame with 4 protection angles) Portable with forklift It is sold as shown. All information without guarantee

Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

EU pallet chassis, heavy-duty trolleys, transport scooters, dray Dimensions: width x length x height (approx. 82 x 122 x 46 cm) 4 heavy-duty roller wheels (2x swivel castors) Very stable steel frame with 4 protection angles) Portable with forklift It is sold as shown. All information without guarantee

Stretch wrapping machine,Strema E500,for wrapping of pallet goods in film.

Packing unit,IPS,for packing of units in shrink film,max H 150 x W 400 mm.

L bar welder,Zeva type SSG-400 for packing of units in film.

Packing unit,stainless steel,Østerbergs,welder and shrink tunnel for packing in film

PRASMATIC MSW 300 C packaging machine was built in Italy in 2012. The packaging machine is used for the automatic shrink-wrapping of products such as bottles or cans in packs of 6-9 pieces. High production efficiency is ensured by the use of state-of-the-art technology to optimise the packaging cycle, such as the cold film cutting system via a rotating blade and the unwinding and winding speed control function via brushless motors to correctly feed the film. The shrink wrapping machine has very low mileage – it was used for only two months of the year. Technical specifications of the PRASMATIC MSW 300C packaging machine - packaging speed: 35 packs/min - average size changeover time: 10 – 25 min - maximum reel diameter: 500 mm - maximum reel width: 680 mm - maximum reel weight: 80 kg - brushless motors - control panel with touch screen - rated current: 65 A - power supp ...

HP DesignJet Z6200 CQ109A Specifications: HP Thermal Inkjet Printing Printheads 2 colors per printhead, 2 printheads per color HP Vivera ink system (photo black, matt black, grey, chromatic red, light cyan, magenta, bright magenta, yellow) Speed Pages per minute (Depending on print medium and print mode) CAD: 17 s/page on A1 Graphic: Quick mode: up to 113,6m²/h on white paper (mechanical printing time) Presentation: 3.2s/page on A1, 13.1m²/h on glossy media Maximum resolution 2,400 x 1,200 dpi optimized Memory 160 GB hard drive Standard printer languages: HP-GL2/RTL, CALS/G4 Optional: Adobe PDF, Adobe® PostSscriptt3®, TIFF, JPEG Medium sizes rolls from 610 to 1,066 mm wide Maximum length of roll media 175 m Media types Paper (plain paper, coated and heavy coated paper, photo paper - matt, semi-gloss, glossy), technical papers, foil (transparent, matt), vinyl (pol ...

Packing unit,Kalfass for shrink film packing of units W 600 mm

Motorized turning traverse of the company MKF. By site closure in an absolutely new condition! The traverse was only used for about 10 strokes. The corresponding documentation is completely available. According to Caterpillar, the original price was about € 85,000.00. Details Type MKF 2MVGP Device No. 170803 Year of construction 01/2019 capacity 35,000 kg Dimensions 7.350 (L) x 1.500 (W) x 2.570 (H) mm Net weight 4.400 kg Ab. Load capacity 35,000 kg Suspension 2-str. Sling chain ø 26 grade 10 Load receptacles round steel chains ø 22 x 66 grade 10, approx. 6,996 mm circumference divided + swivel 175 mm + lock 66 mm Chain center distance 4,800 - 1,500 mm infinitely variable Operating voltage 400 V / 50 Hz Control voltage 24 V Turning speed approx. 3.5 - 4 m/min. Process speed approx. 3 m/min. Set-down device mounted on castors Rotating f ...

Fluid bed,stainless steel,type EB20,for filmcoating of caps./tablets,20 l container.

Electric pallet truck Manufacturer Jungheinrich. Lifting capacity 1.250kg Only about 1,450 operating hours. Good condition Large battery charger Antiebsrad and castors recently renewed from Vulkolan. Special price

bore capacity in steel (diameter): 75 mm arm length: 1700 mm workpiece height max.: 370 - 1700 mm total power requirement: 12 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _______________________________________________________ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial a ...

Reference ID PP-30557 Category Flexo Printer Manufacturer Uteco Model Amber 808 Year Built 1998 Color 10 Impression- Working Hours - Speed 300 m/min Size 1600 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Flexo CI printing machine UTECO Amber 808, 8 colours + 2 stack units, Film width max: 1610 mm, printing width max: 1600 mm, print repeat: 320–850 mm, mechanical speed: 300 m/min, Unwinding and rewinding turret with automatic splice, Reel diameter: 1200 mm, Cores: 70/76/152 mm, Gear pitch: 5 mm, Thermo Oil Drying, 2 web guides, temperature control unit for CI and water cooling unit, 20 chamber doctor blades, 19 ink tanks, 18 ink pumps, approx. 200 printing sleeves (540–690), approx. 23 anilox rollers (60–300 l/cm), 2 video cameras, Sleeves fast change system, 2 stack unit with register control, Slitting ...

: Bj. 1996 pulling capacity: 100 kn stroke length max.: 2500 mm speed: 1-22 m/min return speed: 2-27 m/min Control: SPS S5-115 U Cast aluminum bars were cleared mechanically on this production line machined (drilling / milling) and separated into individual parts This also includes: -1 broaching machine (HOFFMANN, horizontal) so far for steel processing (Shift rods) - Horizontal broaching machine from Hoffmann - Machine type: RAW 630 x 2500 x100 - year of construction 1984 - Control S5 Siemens - 4 clearing points with 3 partial positions each - 1 x reloading for rear side processing - Loading and unloading: - 3x bunkers for raw parts - 3 x feed belts - Loading and unloading handling with 4 x loading and 4 x unloading grippers - 1 x turning device - 3 x material buffers for finished parts - year of construction 1995 - Siemens S7 control The data for this ad was created with ModulMWS - t ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Ultrasonic cleaning system FiSA VST 2000/P, YOC 2014 - Ultrasonic power: 8.4 kW - Component weight max.: 5000 kg - Volume: 2000 l - Heating capacity: 51 kW - Internal useful dimensions L/W/H: 1600/ 1000/ 1250 mm - Space requirement (W x D x H): 12 x 3.2 x 2.1 m - Total power: 60 kW - Condition: very good details Mould cleaning for plastic injection moulding, extrusion, elastomere, die casting, core boxes, moulds; well-kept facility, was hardly in use

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

DeDietrich oil boiler QUANTROL Temperature Controller Tube in tube heat exchanger LIVERANI Stainless Steel Impeller Pump Pre-installed mobile complete system with impeller juice pump, efficient boiler, heat exchanger and automatic control, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 63kW boiler with oil burner circulating pump Pressure expansion tank Automatic temperature control Tube in tube heat exchanger Capacity 750l juice /h Oil consumption: approx. 6l/h at full load

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 3 mm : 2 mm : 7 : 7 : 1130 mm : 180 mm : 915 mm : 3 kW : 4550 mm : 5200 mm : 1435 mm : 1460 mm : 2900 kg hydraulic drive hydraulic sheet thickness adjustment manual adjustable clamping beam pre tensioning 2 hydraulic pressure levels standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions. 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST. OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotar ...

Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machine Programming variants: - Defect caps by marking - Working with cutting list consists of 10 dimensions, possibility of repetition for any measure and total quantity of each measure 100 memory lo ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 2 mm : 1.5 mm : 5 : 5 : 1130 mm : 180 mm : 915 mm : 3 kW : 4550 mm : 5200 mm : 1435 mm : 1460 mm : 2900 kg hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions. 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST. OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on request CONTROLBM 10 7-inch display, prese ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 2 mm : 1.25 mm : 1.25 mm : 4 : 4 : 1130 mm : 180 mm : 915 mm : 2.2 kW : 4550 mm : 5200 mm : 1435 mm : 1460 mm : 2600 kg hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions. 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST. OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on request CONTROLBM 10 7-inch d ...

30 transport trolleys on floor trolleys As good as new, good condition, see pictures Length: 200 cm Width: 90 cm Height: 120 cm Year of construction: 2022 Dimensions work/storage area above: approx. 42 cm x 120 cm Dimensions storage area below: approx. 90 cm x 120 cm Load capacity upper level: max. 100 kg Load capacity lower level: max. 300 kg Total load: max. 500 kg incl. 4 heavy-duty swivel castors (2 of them with brake function) Negotiation price: € 490,-- net per piece ex stock Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase  ...

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

Suction: 410 l/min. Filling capacity: 295 l/min On / switch-off: 8/10 bar Heads / stages: 2/1 container volume: 50 l voltage: 230 V / 50 Hz engine output: 2,2 kW turning speeds: 1000 U/min Sound power level: 97 dB dimensions: 950 x 410 x 875 mm weight: 64 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 580 l/min. Filling capacity: 470 l/min On / switch-off: 13/15 bar Heads / stages: 2/2 container volume: 90 l voltage: 400 V / 50 Hz engine output: 4 kW turning speeds: 915 U/min Sound power level: 95 dB dimensions: 1110 x 495 x 1000 mm weight: 111 kg - easy to move thanks to castors and long handle - mobile, V-belt driven piston compressor - Compressor for work up to 15 bar - equipped with filter pressure reducer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 250 l/min. Filling capacity: 150 l/min On / switch-off: 10 bar container volume: 50 l turning speeds: 2.850 U/min Sound power level: 95 dB total power requirement: 1,8 kW dimensions: 910x470x780 mm weight: 38 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.