carrier chiller used for sale

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

45 running meters pallet rack SSI Schaefer Palflex incl. insert grid Used goods, good condition, see pictures Year of construction 2006 Height approx. 6.5 m Depth 120 cm Field load 12000 kg Galvanized frame Carrier red Insert grid included! 2 grids per 2.7 meter beam length Negotiation price: € 6.590,-- net ex stock Offer consists of: + 17 frames pre-assembled, depth 120 cm, height approx. 6.5 m + 96 beams, length 2.7 m, 1500 kg load/compartment with evenly distributed load +192 pcs Hanging Arresters + 96 galvanized insert grids for 48 levels of 2.7 meter beam length + 68 pcs concrete anchors Stress plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and  ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

50 m pallet rack Jungheinrich type MPB new goods New product, see pictures Height 9 m Depth 110 cm, blue Beam length: 2.7 m, yellow Carrier with load / compartment 3000 kg Negotiable price: € 13,290,-- net from stock Offer consists of: + 19 pcs frame pre-assembled, depth 110 cm, height 9 m + 144 pcs carrier, length 2.7 m, 3000 kg load/compartment + 288 pcs suspension locks + 78 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Field load 12 tons. Strap yellow. Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Ch ...

specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

3 fields mjit 18 cross members in (orange color), sides frame. Each floor is with pallet carrier. Is already dismantled and palletized. Is ready for collection. Field width is approx. 2m Field depth is about 1m Frame height is approx. 3m Condition: used Feel free to make a package price with my other sales items.

Band conveyor,stainless steel stringers,rubber band with carriers,W 270 x L 4640 mm.

3 fields with 16 cross members in (orange color), sides frame. Each floor is with pallet carrier. Is already dismantled and palletized. Is ready for collection. Field width is approx. 2m Field depth is about 1m Frame height is approx. 3m Condition: used Without content Feel free to make a package price with my other sales items.

PET filling line - capacity: 10.000 bph – 1,5 L Year of manufacturing: 1999 – 2006 Control system: Siemens S7 Working hours: 26588 h (total on compressor) consisting of: Blowing machine Blowmax 10 year of manufacturing: 1999 incl. Chiller OHF 1250 Omega year of manufacturing: 1999 Preform dumping, feeding and orientation device year of manufacturing: 1999 High pressure compressor Ateliers Francois CE46BSG 40 year of manufacturing: 1999 Air conveying system year of manufacturing: 1999 Krones Bloc consisting of: Bottle rinser Krones Variojet 2160-054-126 with 54 rinsing stations year of manufacturing: 1999 Bottle filler Krones VP-L60-113 / SV10 / S LM wiht 60 filling valves and 10head screw capper year of manufacturing: 1999 Cap feeding system Gassner year of manufacturing: 1999 Labelling machine Krones Canmatic 600-10 RM year of m ...

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

table diameter: mm stations: 10 axis stroke (X,Y,Z): 250 / 400 / 400 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Rotary cycle machining center for machining serial parts. 10 stations 31 NC axes Control: Siemens 840D Maximum productivity through parallel work processes on up to 9 stations Loading and unloading can be automated in parallel to the main time Travels X / Y / Z: 250/400 / 400mm 10 planet carriers rotatable 360 ° for clamping devices, incl. Media feed-through for hydraulics and pneumatics 5 stations equipped with 6-fold revolver make Sauter Machine hours as of December 20, 2020 Operating hours 15,024 h Production hours 8,115 h Manufacturing costs: € 1,200,000 The application on customer workpieces can be offered. The data for this ad was created with ModulMWS - the software solution of Log ...

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

64" Latex Printer HP Latex 570 Large Format Printer Plotter 1.63 m 64 inch Type: HP Latex 570 N2G70A Manafacture: HP Development Company Year of construction: 2019 For banners, displays, double-sided banners, trade fair/event design, outdoor signage, interior posters, interiors, lightbox film, lightbox paper, wall decorations, POP/POS, posters, textiles and vehicle graphics. Properties: - Up to 1.63 m (64 inches) roll width - Printing of SK rolls up to 100 m and 55 kg - HP 871 Latex Ink Cartridges (7x3 litres, black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer) - Printer status light - spindleless system Specifications: Resolution: max. 1200 x 1200 dpi Print width: 64 inches = 1.63 meters Speed: max. 91 m²/h (1 pass) Dimensions: 2560 x 792 x 1420 mm Weight. 250 kg incl. accessories: - Output plates M0E29-60258 - Removable Cutte ...

No. 5008: 1 gebr. Posten div. Spare Parts - Keyboard / Pcb for Spare Parts Carrier / Retrofit Fabr. HURCO, type Ultimax / Winmax, Accessories: 6 x Input keyboard type 807-0013-005 1 x Input Keyboard Mask 1 x Input keyboard type 807-0013-004 1 x PCB No. 414-0626-002 with Poti RE 45 / 415-0627-001 Other: Shipping weight approx. 6 kg

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

The shelf stands may no longer be used in the commercial sector due to damage and are therefore sold as spare parts carriers. The deformed shelf stands can serve as a material for various DIY projects. For example, these can be used to build a shed, wooden shelter, but also as a frame for raised garden beds or seating. By combining several deformed shelf stands and attaching partitions or fabrics, they can also be used as creative room dividers in living rooms, offices or warehouses. There are countless ways to use the shelf stands. The scope of delivery includes: 01x Steel beam / shelf stand, used Material color: blue Profile dimensions: approx. 100 x 65 mm Material thickness: approx. 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) approx. 3,300 mm high approx. 1,100 mm deep Damage: - Transverse and diagonal struts ma ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Key data: 1095 , 400

COMPLETE TRIGENERATION PLANT INCLUDING CHILLER AND COOLING TOWER Make and Model: JENBACHER 320 G.S N-L Fuel: Natural Gas Capacity: 1095 kW Year: 2007 Hours: 50,000 HZ: 50 V: 400 30,000HR MAINTENANCE SERVICE PERFORMED IN 2017 ON 28,000 hrs. Replaced 20 Cylinder Heads, Pistons complete with Piston Rings, Cylinder Liners Replaced Main Bearings Replaced Intercooler Overhauled Turbocharger, done by a specialist company Overhauled Plate Water Heat Exchanger, done by specialist company Camshaft checked and is in good condition Other works and checks not listed were carried out according to the GE Jenbacher schedule. Scope of supply: Gas engine genset, 2 x cooling tables, Gas line, Control panel, Switchgear, Silencer, Chimney, Piping, Power cables, Control cables, Chiller and Cooling Tower. Available for Sale Now. Price: 100,000€

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Tank made of stainless steel with a capacity of 80 liters. With mediacaña all over the body with chiller and agitation type anchor, opening of lid by hinge .mounted on stainless steel structure on wheels. with electrical panel. General characteristics: Sector of origin Feed Specifications: Volume 80 Background type klopper Half a cane Yes Type of agitation Ancora Lagging Yes Envelope wheels

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Year 2000 Iinstall 2001 Max web width: 48” (1219,2 mm) Impression cylinder circumference: 69” (1752,6 mm) Product size: 219 x 304,8 mm Only 21 mill impressions (genuine) Produces: 128 pages of 8 3/8” x 11 1/4 or smaller every revolution Great for books,bibles or coloring books Equipment: 2 Megtec auto-pasters dlp width 1270 Two web guide unit with double timson indeed unit 2 Units blanket to blanket print units Timson brush dampening system Complete chiller system with circulation 2 Technotrans alpha d cooling devices 1 Folder type m3c/4-2dSstitching system streamliner 2000I Ink pump (200 lit. deposit) Ink agitators Console cdps 1 Extra set of brand new rollers Extra spare partsI Ink remote control system with console Grafikontrol system Tipografic ink unit for second color (logo´s,etc…) 4.645 hours on production Plate bender Rima stacker Free of any ...

Fork carrier or tine adjustment device incl. 4 tines for Kalmar DCF 60 Kaup 4T419N4, used, tight, ready for use

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...

800 St. Jungheinrich MPB beam 2.7 m Used goods, good condition, see pictures Jungheinrich MPB Carrier Length 2.7 m 2800 kg load/compartment with evenly distributed load Negotiation price: € 25,-- net per pc ex stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick-witted! We also clear and dispose of or dispose of liquidators. Write us with s ...

Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ with contamination indi ...

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...