buc used for sale

Vehicle data: Make: Komatsu, Type: PC16R-3H, Drive type: Diesel, \Year of construction: 0, Internal no.: 1305, Mast data: Dimensions: Battery & Charger: Description & Special equipment: Attachments: Quick coupler, Bucket, bucket in 400 mm and 600 mm -Ditch clearing bucket hydraulic 1000 mm Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: We rent a brand new KOMATSU mini excavator type PC16R-3H with tiltable ROPS/FOPS cab and heating, proportional control (via EPC lever) HCU-A and 2 work lights on the cab front (HCU-A/EPC) (NOT in conjunction with Utility KOMTRAX for cabin) Basic machine with hydr. adjustable undercarriage, 2 speeds with auto-shift-down, servo pre-control, swivel boom, 2-way additional hydraulics to boom (switchable to hammer operation), variable displacement pump (210 bar), protective cover on the boom lifting cylinder, work lights on the boom, doz ...

Vehicle data: Make: Komatsu, Type: PC24MR-5, Drive type: Diesel, \Year of construction: 0, Internal no.: 1405, Mast data: Dimensions: Battery & charger: Description & Special equipment: Attachments: Quick coupler, Bucket, bucket in 400 mm and 600 mm -Ditch clearing bucket hydraulic 1000 mm Special equipment: 3rd valve, 4th valve, Front tyres: 0 x / Rear tyres: 0 x / / Description: We rent a brand new Komatsu mini excavator PC24MR-5 Wide range of applications Fast and precise movements, excellent lifting forces GPS Komtrax monitoring Standard TECHNICAL DATA: Engine power:15.8 kW / 21.2 hp Bucket volume:0.035 - 0.085 m³ Max digging depth:2.67 m Operating weight:2,340 - 2,560 kg Driving speed:2.8 - 4.6 km/h Range:4.5 m Incl. bucket in 400 mm and 600 mm Daily rental from 97 plus VAT for 8 hours of operation plus 11 M. break insurance per day. Ditch clearing bucket hydraulic 1000 mm + 30,-- ...

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

Stahlfolder TI 52-4 KB with Tremat, flat pile feeder, 4 buckles, 1 knife, avail 12/18

Excavator buckets / rock bucket, very stable, unused The geometry corresponds to a Fang, the tooth holder / cutting edge is rounded, this high performance, grave. Bucket width: 1500 mm Bucket volume: 1 m 3 (piled) base plate for quick coupler: 520 mm (width) x 640 mm (depth) Excavator size: 18-30 to use weight

215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center  ...

Suction nozzle diameter: 160mm; Nominal flow rate: 1300 m³/h; Bucket bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the like Particularly robust construction housing made of galvanized sheet steel chip barrels are powder-coated paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag extractors correspond to dust class L Basic units are pre-assembled in modular design Only short installation times for large systems Top price-performance ratio Short installation times due to modular design SCOPE OF DELIVERY System body with mounted fan unit 1 - 6 chip bags ASA 11 - ASA 21 Extraction unit with plastic impeller ASA 31 - ASA 61 Extraction unit with metal impeller sta ...

Wet glue labeling machine Langguth E 32 for buckets and canisters incl. glue pump and vibrating magazine very good operational condition, directly from production!

DATA ON THE MACHINE Machine type: Grinding bracket / double grinding bracket Manufacturer: METABO Model: 7230 Condition: very good (used) Price 450 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MET-1119 Description We offer you a grinding buck from the manufacturer METABO. Grinding wheel diameter max. 300 Weight ink. Base approx. 250kg Storage as new. Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Capacity: 8.4 m3/h Operating pressure test 13 bar Engine: 3.5 kW - With connectors: DN 65, DN 50, DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 2200 mm Width: 500 mm Height: 1080 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

Type: FPE 3522 Capacity: 200 l/min Operating pressure test 4.5 bar Engine: 4 kW - With connectors: suction side DN 50 and print side: DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 500 mm Width: 480 mm Height: 1000 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

Multiweigh, 2010, dimple plate with discharge gate, 6 liter buckets.

Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price

Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new  ...

Sell a solid grinding buck for grinding e.g. turning steels Left and right a swinging table that is moved manually over a hebl. The table has the dimensions 400mm200mm, and can be swivelled +/- 10°. The swinging table can be moved by handwheel, to the grinding wheel and away from it Mass grinding wheels diameter approx. 200mm50mm wide Speed 1400 / 2800 rpm KW 0.6 PS 0.8 Connection voltage 400V Dimensions 8505001200mm High Accessories: Working light Various grinding wheels and keys

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

For grooves and grooves according to the method of beam groove Benefits: The 62 cm working width allows grooves, grooves and perforates even for large formats. The robust structure of this groove machine and creasing machine makes it possible to groove and groove up to 3 mm thick cardboard. Special tools can also be installed. (e.g. small punching tools, perforation tools...) By printing e.g. on a paper mallow a buckling edge (fold) is produced. This fold allows the bag to be folded/handled cleanly with a bag. Ideal if the bags are made of several layers of paper. Dimensions 850 x 750 x 1150 mm Built in 2014

Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.

- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

Mini excavator model KV 10 with cab+articulated arm and adjustable landing gear 78cm to 92 cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1100 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track heig ...

Mini Excavator Model R319 Articulated Arm and Adjustable Landing Gear 78cm - 92cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1000 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track height: 320mm m ...

Material : Stainless steel Mixed roe with double sheath, heatable / coolable Mixing tool : Z-arms Total volume: 3.75 l. Usable volume: 2.5 ltr. Main drive: 0.81 KW, 1400 / 43 rpm Bucket speeds: rear shovel: 25 rpm front shovel: 43 rpm permissible vapour pressure: 5.88 bar;

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

Mini Excavator Model HT15 - NEW Finally assembled in Germany Product image is a symbolic image This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Weight: 1500 kg Grab bucket capacity: 0.025cbm/120kg Bucket width: 380mm Engine: KOOP 2-cylinder diesel Rated Power: 15kw Speed: 3.5km/h Dimensions Overall dimension: 2550x940x1380mm Wheelbase: 770mm Overall length: 1090mm Ground clearance of platform: 380mm Turning radius of platform to the rear: 733mm Chassis width: 940mm Track width: 180mm Chassis ground clearance: 380mm Track height: 320mm Workspace max. digging depth: 1650mm max. vertical digging depth:1375mm max. digging height: 2610mm max. dumping height: 1850mm max. digging radi ...

Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor

Filling machine,stainless steel,Hunden,for filling of buckets etc.,1-25 liter

Mini Excavator Model HT15 with Articulated Arm - NEW Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Weight: 1500 kg Grab bucket capacity: 0.025cbm/120kg Bucket width: 380mm Engine: KOOP 2-cylinder diesel Rated Power: 15kw Speed: 3.5km/h Dimensions Overall dimension: 2550x940x1380mm Wheelbase: 770mm Overall length: 1090mm Ground clearance of platform: 380mm Turning radius of platform to the rear: 733mm Chassis width: 940mm Track width: 180mm Chassis ground clearance: 380mm Track height: 320mm Workspace max. digging depth: 1650mm max. vertical digging depth:1375mm max. digging height: 2610mm max. dumping height: 1850mm max. digging radius on the ground ...

Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

Mini Excavator Model HT10 with Articulated Arm - Final Assembly in Germany - New This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1100 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: single cylinder, fan cool Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track height: 320mm max. digging depth: 1650mm max. digging h ...

Colours 32 possible mixed colours, 2 container waste Mixing speed max. 3 min. for mixed colours, approx. 45sec for pure colours (for up to 40kg drum), filling quantity 20kg and 40kg Software available Automatic valve cleaning (also customisable – rinse automatically according to special colours) It is also possible to switch the IBC drum via pumps (no manual intervention) Double filter on the ink inlet drums (ink flow – 1x drum + 1x valve filter) 2x solvent connection (currently ethanol, acetate) Agitator and lift for buckets available completely automatic - everything is pneumatic in the hall itself all in EX design (stainless steel)

Pallet rack approx. 4,80m high, Galler, 1.000kg / pallet, approx. 700 spaces - used - : Price from location: only 7.000.- € (net)! Manufacturer: Galler Type: Omega 20 Year of construction: 1991 Shelf load: 3,000kg with 2.70m trusses Shelf load: 2,000kg with 1.80m trusses Max. pallet weight: Max. usable bay load: 9,000kg with buckling size: 1,350mm Frame approx. 70 pieces (of which approx. 30 frames are slightly dented at the bottom – could be repaired with a repair shoe, or by shortening the frames and rewelding the feet) Frame height: approx. 4.80m Frame depth: approx. 1.10m Frame bracing: welded Trusses approx. 350 pieces Clear width: Type: IPG 100 and others Colour of the trusses: white, grey and orange Condition: used Available: from approx. December 2023 Location: Munich

Yanmar VIO10-2A, 1102h, 2016, 1220kg, Gjerstad embankment bucket

Flexliner Grunwald filling machine for 1L, 0.5L buckets Performance: Approx. 1500 - 2000 cup/h. depending on the consistency and behavior of the product, the remaining unfilled space in the cup and the quality of the packaging materials.

Rotary feeder 1st unit : 4 buckles 2nd unit : 4 buckles 3rd unit : 4 buckles Batch counter MBO ASP 66-2ME press delivery Pumps

4 buckles

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

IWM Sanitiser tunnel Model: SAN100E Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph

diameter: 32 - 50mm der Buchsen length: 350 mm groove width: 10 - 12 - 14 mm weight: 20 kg dimensions: 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IWM Sanitiser tunnel Model: SAN100E Serial: 1281-S1E 2014, Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph