automatic lathe used for sale

Automatic steam trap, tank with automatic drain, 2 pieces SMC EAD44 diameter (filter container): Ø 50 / 58 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 170 x 68 x 65 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD48 diameter (filter container): Ø 52 / 60 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 165 x 68 x 65 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD37 diameter (filter container): Ø 38 / 44 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 142 x 53 x 49 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC EAD43 diameter (filter container): Ø 36 / 42 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 142 x 53 x 49 mm

Long automatic loading system. With this system, products clamped in clamping devices are automatically transferred to the machining center. The machine is in very good condition. Includes 25 pieces of clamps. Currently coupled with a 5-axis machining center from Hermlle. Still to be seen under power. (Subject to prior sale)

Semi-automatic counter-strainer Meiguang FMB-1300A Minimum format: 360x360mm Maximum format: 1300x1200mm Year: 2014 More photos available

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 26300 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts€ 3.700,-- hydraulic top clamping from above € 1.280,-- micro cooling unit € 890,-- laser cutting line € 560,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer an automatic system for polymer coating as a complete system. The individual purchase of components is also possible. For more detailed information, please feel free to contact me. Among other things, the following components are available for sale: - Robots from Motoman / Yaskawa: S8Q554-1-1, S8 Q553-1-3, S7M 744-1-2 - Component preheating of Glasbeek Finish BV: 105-Z3100 23KW - Various diaphragm pumps, storage tanks, lifting sinking stations for primer preparation from Krautzberger - 2x instantaneous water heater from DETE GmbH: Vulkan 35 - 2x control unit type : OptiStar CG0 from ITW Gema - Extraction walls from ITW Gema and Krautzberger - Spark detection BM20, BZ20 from STS fire protection systems

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

High-performance machine STOTZ-KONTAKT S 201-E L6 ( S201EL6 ) GH S 201 2061V0 6,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 75 x 45 x 90 mm

High-performance automatic STOTZ-KONTAKT S 201-E L16 ( S201EL16 ) GH S 201 2161V0 16,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 75 x 45 x 90 mm

High-performance automatic STOTZ-KONTAKT S 202- T K 0.3 SÖ ( S202-TK0.3SÖ ) 0.3 A 380 V AC 250 V DC New ! Dimensions (packaging): 100 x 80 x 95 mm

High Performance Automat STOTZ-KONTAKT S 201-E L16S ( S201EL16S ) GH S 201 2161V111 16,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 75 x 45 x 90 mm

High-performance automatic STOTZ-KONTAKT S 202- T K 0.5 SÖ ( S202-TK0.5SÖ) 0.5 A 380 V AC 250 V DC New ! Dimensions (packaging): 100 x 80 x 95 mm

High-performance automatic STOTZ-KONTAKT S 201- L16Ö ( S201L16Ö ) GH S 201 2162V112 16,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 90 x 45 x 90 mm

High-performance machine STOTZ-KONTAKT S 202- T K 5 SÖ ( S202-TK5SÖ ) 5,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 100 x 80 x 95 mm

High-performance automatic STOTZ-KONTAKT S 201-E L20 ( S201EL20 ) GH S 201 2201V0 20,0 A 380 V AC 250 V DC ́New ! Dimensions (packaging): 75 x 45 x 90 mm

High-performance automatic STOTZ-KONTAKT S 203- E K 1,6 Ö ( S203-EK1,6Ö) 1,6 A 380 V AC New ! Dimensions (packaging): 115 x 80 x 95 mm

High-performance automatic STOTZ-KONTAKT S 201-T L20Ö ( S201TL20Ö ) GH S 201 2202V112 20,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 90 x 45 x 90 mm

High-performance automatic machine STOTZ-KONTAKT S 203- E K 3,5 Ö 3,5 A 380 V AC New ! Dimensions (packaging): 115 x 80 x 95 mm

High Performance Automat STOTZ-KONTAKT S 201-T L15Ö ( S201TL15Ö ) GH S 201 2152V112 15,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 90 x 45 x 90 mm

High-performance machine STOTZ-KONTAKT S 203- T K 3,5 SÖ ( S203-TK3,5SÖ ) 3,5 A 380 V AC New ! Dimensions (packaging): 115 x 115 x 95 mm

High Performance Automat STOTZ-KONTAKT S 201- T L6Ö ( S201TL6Ö ) GH S 201 2062V112 6,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 90 x 45 x 90 mm

High-performance machine STOTZ-KONTAKT S 203- E K 10 Ö 10 A 380 V AC New ! Dimensions: 105 x 75 x 90 mm

High-performance automat STOTZ-KONTAKT S 202- E K 0.5 SÖ ( S202-EK0.5SÖ ) GH S 202 7151V121 0.5 A 380 V AC 250 V DC New ! Dimensions (packaging): 80 x 80 x 95 mm

High-performance automatic STOTZ-KONTAKT S 203- T K 2,0 SÖ ( S203-TK2,0SÖ ) 2,0 A 380 V AC New ! Dimensions (packaging): 115 x 115 x 95 mm

High-performance machine STOTZ-KONTAKT S 202- E K 5 SÖ ( S202-EK5SÖ ) GH S 202 7351V121 5,0 A 380 V AC 250 V DC New ! Dimensions (packaging): 80 x 80 x 95 mm

High Performance Automat STOTZ-KONTAKT S 203- E K 4,2 Ö ( S203-EK4,2Ö ) 4,2 A 380 V AC New ! Dimensions (packaging): 115 x 80 x 95 mm

High-performance machine STOTZ-KONTAKT S 203- E K 20 SÖ ( S203-EK20SÖ ) 20 A 380 V AC New ! Dimensions (packaging): 115 x 80 x 95 mm

High-performance automatic STOTZ-KONTAKT S 203- T K 7,4 SÖ ( S203-TK7,4SÖ ) 7,4 A 380 V AC New ! Dimensions (packaging): 115 x 115 x 95 mm

High-performance machine STOTZ-KONTAKT S 203-T K 8.5 SÖ ( S203-TK8.5SÖ ) 8.5 A 380 V AC New ! Dimensions: 105 x 115 x 80 mm

High-performance automat STOTZ-KONTAKT S 203-T K 10 SÖ ( S203-TK10SÖ ) 10 A 380 V AC New ! Dimensions: 105 x 115 x 80 mm

High-performance automatic STOTZ-KONTAKT S 203- E K 4,2 SÖ ( S203-EK4,2SÖ ) 4,2 A 380 V AC New ! Dimensions: 105 x 75 x 90 mm

automatic backwash filter BWT Infinity AP Nominal connection diameter: DN 25 Flow rate ( at Δ p = 0,2 / 0.5 bar ): 5.0 / 7.5 m3/h lower / upper passage width: 90 / 110 μm Nominal pressure (PN): 16 bar Operating pressure: 2.5 - 16 bar Power consumption: max. 8 W power supply: Input: 100 - 240 V AC 50 / 60 Hz / Output: 24 V DC 0.4 A Connection module AG1 x AG1 ( inch ) New, with documents ! Dimensions ( filter ): 560 x 120 x 140 mm Dimensions ( packaging ): 580 x 390 x 200 mm

Reversierautomat ELEKTROR, KARL W. MÜLLER Type: RA 6 D Switching time: 0,0,7 sec voltage: 200 - 240 V AC current: 0.041 / 0.053 A frequency: 50 / 60 Hz inputs: Inner diameter: Ø 55 mm Flange diameter: Ø 70 / 100 mm Foot: 255 x 130 mm Material: Aluminium Servomotor-driven reversing device to change the air flow from pressure to suction mode and vice versa. New ! Dimensions: 340 x 290 x 500 mm

VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar

AUTOBOX HIPAK 2675 AUTOMATIC BOXMAKER Year of production: 2008 Max 2400 mm Min 100mm x 330 mm Blade clearance – blade distance max 1400 mm blade clearance – blade distance Min 65 mm Knife width 8 mm Machine is in good condition can be seen in production in Europe

- Capacity: 300 - 400 bph (0.75 l) - Operating pressure: max. 5 bar - Bottle diameter: 50 - 114 mm - Max. bottle height: 380 mm Includes: - 4 isobarometric nozzles - With double pre-evacuation - 4 sets of level nozzles (different filling levels) - False bottles - 1 single-head corker for sparkling wine - 1 single-head Wirehooder - With automatic distribution system wirehoods

Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END  ...

Encapsulated automatic cable reel, cable reel, cable reel ELEKTRON BERLIN No. 01204 Triple socket No. 1479, 10/16 A, 250 V AC cable: GMH11YÖ K25 cross-section: 3 x 1,5 mm² Cable length: approx. 8 m Drum diameter: Ø 300 mm nominal power (coiled): .max. 1800 W nominal voltage: max. 250 V AC Primary voltage: 220 V 1AC 1.4 A used, tested ! Dimensions: 350 x 260 x 170 mm

Used labeller, also as a stand-alone solution, MULTIVAC, type: L310 -El. Connection: 3x 400 V, 50 Hz, 2,000 VA

Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD38-A diameter (filter container): Ø 38 / 41 mm ( inside / outside ) hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 144 x 53 x 49 mm

Air pressure 6bar Operating voltage: 3 x 400V

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range round: 320 mm Cutting area square: 300 x 320 mm Saw blade dimensions: 575 x 50 x 2.5 mm Lifting speeds: 16 - 45 m/min Drive motor: 380 V, approx. 6 kW Space requirements: 1600 x 1580 x 1470 mm Weight: 1220 kg