We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,275 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
AUTOBOX HIPAK 2675 AUTOMATIC BOXMAKER Year of production: 2008 Max 2400 mm Min 100mm x 330 mm Blade clearance – blade distance max 1400 mm blade clearance – blade distance Min 65 mm Knife width 8 mm Machine is in good condition can be seen in production in Europe
used
The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for ...
used
The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up ...
used
WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.
used
FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER
used
Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation. Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180?C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250?C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300?C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basi ...
used
used
Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods.
new
AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a ...
used
Automatic labeling machine for anti-theft alarm devices. With AUTOETIK head model BETUL III DIGI, by means of stepper motor. Label width: 8mm/minimum; 100mm/max. Label length: 8mm/minimum: max. unlimited Max. speed: 35m/min The machine is equipped with a magazine for carton loading (folded), suction cups for unloading, conveyor belt to the head and outfeed belt. HEAD MANUAL, ELECTRICAL DIAGRAMS, EXPLODED VIEWS AND INVERTER MANUAL AVAILABLE.
used
Brand : Barriquand Steriflow Model: 1351 EA Year of manufacture: 1994 Type: sterilisation autoclave Capacity: 6.57 m3 / 6570 dm3 (5 baskets) Fluid: overheated water / steam Design pressure: 5 bars Design temperature: 150?C Exchanger type IJMS Equipped in 2017 with an MPI Expert kit: improved visibility and traceability of cycles. Technical file and regulatory report available.
used
AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H
used
Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...
used
AutoScreen screen bedside 125 mm width other screen changers (hand-screen changer, hydr. Screen Changer) available
used
Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use
used
The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up ...
used
used
manual production of punched oil carton stencils, with autom. Cardboard feed, with large handwheel for simple operation, with the letters of the alphabet, numbers and all common punctuation marks Font size 1/2 inch = 13 mm
used
Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request
used
; ready to use
used
; now ready
used
Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg
used
K.S. Automatik elevator from 2006. Conveyor width: 160mm Year of production: 2006 Serial number: 7 Condition: good Dimensions: 1.300mm x 600mm & 1.300mm (LxW&H)
new
Dough dividing and moulding machine Model: TTW30 - Z Size: 3 30 / 100 g 4 40 to 120 g NEW MACHINE 2 years warranty Delivery: free House, within Germany
used
Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinged plates for sale. -6 floors each 2000mm wide and 9600mm long -Total baking area 115.2 sqm -Lights passage in floor 180mm -Steam zone 1200mm -Temperature zone classification stove 1- 3 is top and bottom heat common -Temperature zone classification stove 4- 6 is separated from upper and lower heat -Oven compound outside 3000mm wide 10360mm long and 3250mm high -oven weight approx. 40 ton -with 6 pull-off trolleys including 12 pull-off apperates -Wagenkrabbler -with thermal oil boiler -with compensating container and drain container -oven is in operation and can be visited on request
used
used
Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.
used
Product size, leakage tester with graviering unit. After the test mark the good product Dimension (mm): 2500x950/1550-2300 Gravier: 322-WRDM, Borries Leakage tester, DLP 30, Bayer Vacuum pump, RA 0040 F 503, Fezer
used
TECHNICAL DATA: Dimension mm: 3300 x 1100 Payload Kg: 1000
used
Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.
used
Тype: WALDYSSA AUTOMAC 45 Model: B 223 XL Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: Length: 245,0 сm Width: 170,0 сm Height: 170,0 сm Voltage: 380 V, 50Hz Power: 3,9 kW Machine weight: 500 kg
used
Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg
used
Тype: FESSMANN AUTOVENT - 3 trolleys Base width: 151 сm Base depth: 347 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102
used
Тype: WALDYSSA AUTOMAC 45 Model: B 223 ZR Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: length: 190,0 сm width: 170,0 сm height: 150,0 сm Voltage: 400 V, 50Hz Power: 3,9 kW Machine weight: 500 kg
used
Тype: FESSMANN AUTOVENT - 1 trolley Cooking: steam low pressure 0,5 – 1,0 bar , by steam jets and high spraying rate in to the AUTOVENT Connected load for Low Pressure steam 0,5 Bar; 45 kW; 70 Kg/ h Control panel: MC 3.1 Base width: 151 сm Base depth: 127 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102
used
Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A
used
Round vibretion feeder #4458 Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Diameter: 900mm Adjustable vibration
new
Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min
used
max. web width: 370 mm - unwind for paper rolls, max. unwind 40' web guide and 1 pneumatic shaft - dancer controlled pneumatic brake - 4 wet offset printing units with conventional dampening - cylinder circumference 16 2/3' fixed size - reel rod blanket cylinder - each inking unit can be declutched - circumferential register for straight web path from central control table, variable with curser - optical web break detectors - central dampening water circulation system - roller washing device - drip oil lubrication - perforation and cutting station - Remaliner punching and file hole punching - rewinder for max. paper diameter 28' (70 cm) and 1 pneumatic shaft 70mm - strobe light - cross cutter (sheeter) - turn bars for reverse printing - plate bender - electric power supply: 380 V, 3 Phasen, 16 kW - length of the machine: 7,9 m - speed: max ...
used
1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Tech ...
used
Checkweigher Manufacturer Garvens Automation GmbH Type SL 2 DM Year of construction 1990 Maximum load max. 100 g Documents available
used
The machine consists of the following main components and is built identically as MA100156: ? Welding machine with turntable ? Clamping tools product ? Welding Equipment ? Welding fume extraction ? Plasma Module 10 ? Fronius ROB 4000 interface to plasma module ? Fronius ROB 5000 interface to TIG module ? Fronius hose package and welding torch ? Chilly35 cooler, 1 cooler for both power sources
used
Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg
used
Parts cleaning machine make AUTOP PERKUTE type JET 82 TFabr. -No: 177471 Year 1981Technical specifications:Basket diameter: 785 mmusable height: 630 mmBasket load capacity: 500 kgContainer capacity: 130 lPower of the pump: 2.0 kWHeating power: 6,0 kWPower connection: 380 V / 50 HzWeight approx: 250 kgWith- mobile- Heater- powered basket- Nozzles from above and from the sideusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
automatic loader year 2003, max diameter ø 60/65 mm, bar L = 3000 mm, available and visible
used
Laser welding machine Automatic Letter Bender ALB SPEED MASTER 500W DUAL It is barely used, we have used it 4 times. We bought it for a project that ended up not working out. 500W Year 2020
used
For sale Dusseldorf pallet straightening and riveting machine, almost new, working in all its parts.
used
Shuttle conveyor (Traverser) Used to transfer PCB's from one PCB production line into two PCB production lines from single track to dual track operated machines or vice versa.
used
Miter Saw for Aluminum / Wood / PVC, automatic, in excellent condition, working and with several spare discs. Pneumatic clamps and lubrication, integral casing with safety micro, machine equipped with refrigerant oil, air gun, 450 mm retractable blade.
used
Available in stock 1 x Used ESA VT330W Graphic HMI Console (VT330WAPMOO). The unit is used but is in good working conditions.