atlantic haco used for sale

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Hydraul. Table scissors, used, ready for demonstration under electricity       hydraulic plate shearer, used , under power, ready for operation Type: XTSL 3016 Fabr./ make : Atlantic Year of construction/ year: 1993 Sheet thickness with the largest sheet width/ thickness at max. cutting length: 16 mm ( structural steel / mild steel ) 12 mm ( stainless steel / high grade steel) Cutting width/ cutting length: 3100 mm Weight/ weight: approx. 14 t Specification: Rear stop / backstop

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,38 x 2,22 m Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic guillotine shear model Atlantic 3012 very good condition. - Year of manufacture - 1990. - Length of the cut sheet - 3000mm. - Max cutting thickness 12mm - The machine is equipped with an automatic bumper. - The machine has 1 set of spare original knives. - Weight 8000 kg.

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric backgauge, on ball screws with 2 stop fingers, manually adjustable - manual table crowning, with analogue display Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible Mul ...

pressure: 230 t chamfer lenght: 5000 mm distance between columns: 4050 mm : 800 mm : 500 mm : 300 mm : 600 mm : BC 45 Grafik : 18,7 kW : 22,0 t : 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic guillotine shears Manufacturer Atlantic Type ATS3000 Year of construction 1996 max cutting thickness 6,0mm cutting length 3050mm New knife on machine in addition there are 2 knives plus 1 stump once new Machine is fully functional, has not been energized for 4 months Anschäge, circulation and documentation available.

pressure: 230 t chamfer lenght: 3600 mm distance between columns: 3150 mm column arm: 300 mm table width: 200 mm dayligth: 450 mm stroke: 200 mm back stop - adjustable: 500 mm working feed: 7,0 mm/sec return speed: 80,0 mm/sec work height max.: 965 mm oil volume: 275 l Pressure power: 265 bar total power requirement: 18,7 kW weight of the machine ca.: 13300 kg. range L-W-H: 4100 x 2200 x 2670 mm Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) Pivoting control panel in front left - CNC electric backgauge (X axis) with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control The data for this ad ...

Type / type: ATSL 3013 Fabr./ make: Atlantic Year of construction/ year: 1992 Stock number: 0969 Sheet thickness with largest sheet width/ thickness at max. cutting length: 13 mm ( mild steel ) 6 mm ( stainless steel / high grade steel) Cutting length: 3050 mm Weight/ weight: approx. 8.6 t Specification: Backstop

Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.

Sheet thickness: 13,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm Guillotine Atlantic - XTSL 3013 MACH-ID 7122Make:AtlanticType:XTSL 3013Control:Robosoft SC5Year:1994 Control Robosoft SC5 Maximum sheet thickness13 mm Backgauge stroke X in mm1000 mm

pressure: 180 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 235 bar voltage: 380 V total power requirement: 15,0 kW weight: 14200 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake with torsion shaft - ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric back gauge with 2 stop fingers, manually adjustable on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-mo ...

The Digiline Label Offline system makes it possible to pre-produce and serialize (pharmaceutical) labels quickly, abrasion-resistant and process-safe. In this way, the serialization process is decoupled from the dispensing process in terms of time and space. Machine incl. PLC OMRON. Output: 60 m/Min.

pressure: 200 t chamfer lenght: 3660 mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: 13,50 t dimensions of the machine ca.: m • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressive force: 135 t Working width: 4100 mm Clear stand width: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Bcyhrjh9qri Weight: 10.8 t Space requirements: 4250 x 1800 x 2400 mm

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

sheet width: 3050 mm plate thickness: 6 mm Control: SC5 back stop - adjustable: 750 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: LTH 3,8 x 2,5 x 1,7 m - motorized backgauge - Electric cutting gap adjustment - electric Cutting angle adjustment - Footswitch - Front support arms 2.60 m. - pneumatic lifting device - Spare knife - Rear area monitoring optical sensor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...

Offer 24027 Specifications: - Printing capacity 135 t - Working width 3100 mm - Passage between uprights 2600 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Plunger stroke 120 mm - Fixed stop adjustment range 120 mm - Drive 400 V / 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3300 x H 2300 x D 1600 mm - Weight approx. 7500 kg - With: - Swivel arm control panel with LC actual value display - for adjusting the pressing depth + pressing pressure + back gauge - Motorized backgauge - 4-fold universal die + sharpening tool + deer foot tool - Two-hand control panel with foot switch - Support arms

sheet width: 3050 mm plate thickness: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: 750 mm Control: SC7p engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm from a maintenance workshop well maintained condition - checked annually () Furnishing: - electro-hydraulic sheet metal shears - backdrop-guided - ATLANTIC NC control unit - model SC7p Target / actual information about the motorized back gauge Manual positioning possible via handwheel Digital display for backgauge position electro-hydraulic cutting angle adjustment Adjustable retraction from the back gauge before the start of the cut Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Fi ...

sheet width: 3050 mm plate thickness: 6,0 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10,0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325333 The data for this ad  ...

Specifications: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs -Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirements incl. back gauge, without front support arms -ca. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cutting line illumination

Emergency light, surface-mounted lamp-emergency light BLESSING, COOPER ATLANTIC LED O-230-CG Article number: 120.052.028 2x 1.5 W LED 230 V AC/DC 50 Hz New ! Dimensions ( emergency lamp ): 305 x 135 x 65 mm Dimensions ( packaging ): 310 x 145 x 120 mm

: 135 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baader 201 Violet Machine Violet machine for large cod and red fish Released: 1997-1998 Condition: excellent The machine is designed to produce standard fillets from gutted and decapitated large fish without shoulder bones. Processed cod, salmon, tuna. Equipped with a functional device for laying fish, large knives scraping rib bones, as well as guides, providing a high output of evenly cut fillets. Due to its compactness, the Baader 201 can be mounted on ships. It is possible to connect the skin-removal machine. Performance: 10, 18 or 20 fish/min clocked Working range: Atlantic cod - 50-120 cm (max. 13 kg); Cod Pacific - 54-108 cm (max. 13 kg); side - 60-120 cm (max. 12 kg), salmon - max. 9 kg, tuna - 4.5 - 9 kg. Power consumption: 4.5 kW Water consumption: 16 litres/min Dimensions: 4.70 x 1.67 x 1.45 m Mass (net/gross): 1800/2230 kg

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3050 mm MACH-id     5122 MAKE          HACO Belgium TYPE            HSLX YOP              2011 SPECIFICATIONS Control        Cybelec CybTouch 8 Guillotine / Lazer / Cutting table         Guillotine Cutting lenght         3050 mm Maximum sheet thickness       6 mm Backgauge stroke X in mm      750 mm DIMENSIONS Length        3400 mm Width         4000 mm Height        2100 mm

Hydraulic panel shears - storage machine - incl. foot switch, touch screen, rear installation room with light barrier monitoring, automatic/electric cutting gap, automatic/electric cutting angle, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - storage machine - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Sheet thickness: 6,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness:    6 - 4 mm Max. cutting length:        2.060mm Strokes on full length:     30mm Strokes in short 1000 length:55 Cutting angle:              1,20 ° Length backgauge:           1.000mm Number of down holders:     9 Power:                      7,5 kW Length:                     2.150 mm  Width:                      1.750 mm  Height:                     1.700 mm  Weight:                   ...

Capacity: 320 t Folding length: 4100 mm CNC Brand: _Unknown / Other CNC Model: Robosoft ATS 900 MACH-id     5560 MAKE         HACO belgium TYPE           ERM 40320 YOP             2005 SPECIFICATIONS Max. bending length         4100 mm Distance between column        3150 mm Max. pressing force           320 T Dis. Beam - Table         500 mm Beam stroke                  250 mm Troth beam                     330 mm Approch speed               80 mm/min. Working speed                8 m ...

Specifications: - Cutting length up to approx. 220 mm - Cutting thickness - Steel with 400 N/mm² strength 4 mm - Stainless steel with 600 N/mm² strength 3 mm - Cutting angle 90 ° - Stroke rate up to approx. 35 1/min. - Depth stops left + right - Table support surface 600 x 400 mm - Table height approx. 1000 mm - E – Foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 800 x H 1200 x D 650 mm - Weight approx. 500 kg

Sheet thickness: 12,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id    5484 MAKE         HACO TYPE           HSL 3012 YOP             90 er SPECIFICATIONS Maximum sheet thickness         12 mm Max. cutting length                    3100 mm Strokes on full length                 17 mm Strokes in short 1000 length       21 Cutting angle      0,5 - 3 ° Length backgauge        0 - 1000 mm Number off down holders        18 Approach speed         50 mm/sec. Power          15 kW DIMENSIONS  Length  &n ...

Sheet thickness: 13,00 mm void: 0 Table length: 4100 mm Table width: 4100 mm Knife length: 4100 mm MACH-id    5322 MAKE         HACO Belgium TYPE           HSLX 4013 YOP            2000 SPECIFICATIONS Control        Robosoft SC7p Guillotine / Lazer / Cutting table        Guillotine Cutting lenght        4100 mm Maximum sheet thickness        13 mm Backgauge stroke X in mm      0 - 1000 mm DIMENSIONS Length     4300 mm Width       2500 mm Height      2200 mm

Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id    5325 MAKE        HACO TYPE          TS 306 YOP            80 er SPECIFICATIONS Guillotine / Lazer / Cutting table        Guillotine Cutting lenght         3050 mm Maximum sheet thickness      6 mm Backgauge stroke X in mm        0 - 1000 mm DIMENSIONS Length       3600 mm Width         2100 mm Height        2000 mm

Sheet thickness: 13,00 mm void: 3050 Table length: 0 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIONS Controll   SC 70 Robosoft Guillotine / Lazer / Cutting table   Hydraulic Guillotine Cutting lenght    3050 mm Maximum sheet thickness  13 mm Backgauge stroke X in mm   0 - 1000 mm DIMENSIONS Length  4300 mm Width   2200 mm Height  2500 mm

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

: 6 mm : - t : 4 kW : 250 mm : 90 ° : 35 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 150 t Folding length: 3600 mm CNC Brand: Robosoft SPECIFICATIES Besturing   Robosoft Soort kantbank / zetbank / Mech. / Hydr .PressbrakeWerking Hydraulisch / Servo / Mechanisch  Hydraulic Max. buig lengte   3600 mm Buig lengte tussen kolommen  3150 mm Max. tonnage T / of dikte in mm   150 Ton Uitlading   250 mm Slag lengte  120 mm Inbouwhoogte  325 mm Bereik achter aanlsag  X in mm 750 mm Aantal gestuurde assen  2/3Vermogen Kw  11.4 kW

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000  

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

Key data: 135 t, 3150 mm

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling  

electrical network - 380 V frequency – 50 Hz main fuse – 20A main engine directly on line main engine power – 7.5 kW motor with rear pressure gauge – AC 0.37 KW control: SP8 Cutting length - 3100 mm Thickness of cut sheet metal in grade S355 - 6 mm, stainless steel sheet - 4 mm.

Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm

Capacity: 135 t Folding length: 3100 mm CNC Brand: ATL CNC Model: 2000 Make Haco ERM 135 T Type EUROMASTER - ERM Year 1992 ATL 2000 Capacity (metric tons) 135 Ton Folding length (mm) 3.100 mm Down stroke or Up stroke Synchro Tandem type Y¹+Y²+X+ V1 set universal tooling