asic used for sale

Description X axis: 1000 mm Y axis: 1200 mm Z axis: 4000 mm motors: brushless caliper rotation: 90 ° indicative size of the press (ton): up to 150 ton max load: 2 kg

Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control

The ejector is to be replaced. The rest of the machine works fine injection system: Screw diameter - 60 mm Injection volume - 735 cm3 Shot weight - 640 g Injection pressure - 2100 kgf/cm3 Injection speed - 332 cm3/sec Injection speed - 118 mm/sec Screw pitch - 260 mm Screw speed - 175 rpm clamping unit: Clamping force - 260 tons Opening stroke - 850 mm Mold height - 260 mm Max daylight - 1100 mm The distance between the tie rod - 560x560 mm Ejector force - 7.7 tons Throwing stork - 180 mm Clamping speed - 375 mm/sec Opening speed - 500 mm/sec Power system: Pump motor - 45 kW Thermal power - 22.3 kW System pressure - 175 kgf/cm2 Capacity - 700 liters General: Machine size - 6.3x1.7x2.3 m Machine weight - 12.1 tons

Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Machine dimensions Length 3900mm Width 1200mm Height 1900mm Weight 3200 kg Closing system Knee closure type Clamping force 90t Ejector stroke 750 mm Mold height max 350 mm Mold height min 125 mm Clearance between columns 360 x 360mm Injection system Screw diameter 31 mm Max injection pressure 216 MPa Max injection volume 120g Max injection speed 53 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Drive system: SIEMENS DS - engine 55 kW,. average rotor diameter: 800 mm Rotation: 3,000 rpm Tools: 96 PCs Grinding gap: 8 - 0.5 mm Air volume: 3,000-3,700 m m²/h Total weight: 2,500 kg Engine data: 55 kW, 3.000 rpm, 400 V, 50 Hz, IP 54 Dimensions approx.: 2,350 X 1,400 X 1,200 (L X W X H) Usage area: Grinding of grain sizes approx. 20-250 µm in 2004, the storage and the engine were renovated and converted the plant to circulating oil lubrication with oil pump and accessories.

A rinser of the brand ICS is offered for rinsing the bottles before bottling. Rinser has 40 grippers Power: 12,000 fl/h Pitch: 125 mm Built in 2002 Control : Siemens 7 If you have any further questions, please do not hesitate to contact us

Three-phase motor, electric motor -Power: 4 kW -Speed: 2940 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP44 -Dimensions: 380/290/H220 mm -Weight: 39 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 395/300/H225 mm -Weight: 41 kg

Three-phase motor, electric motor -Power: 13 kW -Speed: 2930 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 570/410/H370 mm -Weight: 122 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2890 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 450/330/H270 mm -Weight: 61 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 445/340/H260 mm -Weight: 55 kg

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.

DMN Westinghouse AL 200 rotary valve Discharge and dosing valve, type AL 200 stainless steel 1.4408 (ASIS 316) Volume 5.5 ltr. / U, SEW direct drive 24 RPM / 0.55 kW / 380 V

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

In line 90? panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW, additional roller coveyor aside in case of transport without turning -Adjustable fence -Clamping and turning device -Second roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feeds ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Sheet thickness: 4,0 mm Bending length: 2000 mm Number of rolls: 3   Make Faccin 4 mm Type ASI / M Year 1996 Asymetric 3 roller Sheet thickness (mm)Thick = 4 mm Bending length (mm)Length = 2.000 Number of rolls  3 Digital read out Foot switch L & R Mot. side roll CE Safety  

Wölco Lupo VPAB-53 labelling system Fully automatic labeling machine for professional labeling Broadband Multi-Labeler Manufacturer: Wölco Masch. Type: Lupo VPAB-53 YOC 2011 Connection: 400V Current 3 x 16 A Power: 2.5 kW Air: 6 bar Broadband Multi-Labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Masch. Type: Lupo VPAB-36 YOC 2011 Connection: 400V The Lupo VPAB-36 is the ideal device for permanent industrial operation when precise and variable label printing with position-accurate application is required. Sato Printer S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid Design is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED ...

Sheet thickness: 6,00 mm Bending length: 2050 mm Number of rolls: 3   Make Faccin 6 mm Type Asi 2015 Year 2005 3 roll plate bender blechwalze plaatwals wals Sheet thickness (mm) Rolling = 6 mm Bending length (mm) Length = 2.050 Number of rolls Pre = 4 mm Top roll 150 mm Digital readout pos. roll Hardned rolls  

Middle-cut device Belt delivery Three knife trimmer Stitching unit Quality Control (MM ASIR !) Feeder (6x TAL 350) Cover feeder (UFA 350)

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

Built in 2007 Size max: 430 x 320 x 60 mm Size: 140 x 100 x 3 mm working hours: 17.900 h Speed:max 5.000 c/h Equipment: gathering machine: • 24 stations • 24 feeder 1571 controls: • ASIR automatic signature image reader • ASAC automatic self-adjusting calipers perfect binder: • 20 clamps • double kombined spine preparation station • hotmelt spine gluing unit • hotmelt side gluing unit • rotary coverfeeder • cover scoring • cover pressing station • 2nd cover pressing station • lay down device optional equipment --- not included ---: • PUR spine gluing unit Bl7yrcc8tb • PVA (cold glue) spine gluing unit • conveyor belts to trimmer • trimmer Müller Martini Merit

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Motor control, drive inverter, frequency converter, inverter SEW MoviMot MM05C-503-00/0/P21A/RE1A/ALA4 8241155 bis 0,37 kW 380 - 500 V with ASI binary slave MLK11A MFP21D/MM03c-503-00/Z27F 1 8231214 used, tested ! Dimensions: 250 x 210 x 125 mm

Three-phase electric motor EP ROMANIA ASI 24 F1 15 L4 ( ASI24 F115L4 ) 1,5 kW 1425 rpm 220 / 380 V 3AC Design: B14K IP44 Shaft diameter: Ø 24 mm Wavelength: 50 mm Groove width: 8 mm Flange diameter: Ø 95 / 140 mm bolt circle diameter: Ø 115 mm 4x threaded hole: M8 x 1.25, depth: 15 mm used, tested ! Dimensions: 330 x 180 x 240 mm

Three-phase electric motor EP ROMANIA ASI 90 S24F165-4 ( ASI90S24F165-4 ) 1,1 kW 1390 rpm 220 / 380 V 3AC IP 44 Design: B35 Shaft diameter: Ø 24 mm Shaft length: 50 mm Groove width: 8 mm Flange: Ø 201 / 130 mm bolt circle diameter: Ø 163 mm hole diameter: Ø 11 mm < br />motor base: 135 x 192 mm hole spacing (parallel to shaft): 100 mm hole spacing ( transverse to shaft ): 140 mm hole diameter: Ø 9 mm New ! Dimensions: 305 x 250 x 200 mm

Three-phase electric motor EP ROMANIA ASI 24 F1 65 S4 S1 ( ASI24 F165S4S1 ) 1,1,1 kW 1390 rpm 220 / 380 V 3AC IP 33 Design: B5 Shaft diameter: Ø 24 mm Wavelength: 51 mm Groove width: 8 mm Flange: Ø 201 / 130 mm bolt circle diameter: Ø 163 mm hole diameter: Ø 11 mm New ! Dimensions: 305 x 201 x 250 mm

Torque transducer ASI DATAMYTE 1KFM0025 5206.1212.0020 max. 20 Nm 18.68 Nm / 2 mV Square mount: 6.5 x 6.5 mm used, tested ! Dimensions: 72 x 68 x 31 mm

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

Used Filling Monoblock for Beer Moravek 2016 The Mor vek 12 12 1 monoblock filling machine is an efficient and reliable machine used to fill beer at a high speed of 2500 bottles per hour It is equipped with 12 grippers for a single treatment and 12 valves with a fixed nozzle to fill beer in glass containers of 0 33L and 0 50L This is an ideal machine for beer production in any size of brewery as it offers a quick consistent and high quality output The machine is also designed with safety features and is easy to use and maintain It also comes with a crown capper with a head of 29 and a clockwise rotation direction Aside from that manuals are available to make the most out of your machine The Mor vek Tribloc 12 12 1 is currently in storage and ready to be used in any production line The reliable and efficient performance of the machine ensures that it can be used to produce high quality be ...

Complete soft drink production unit for sale. We offer the following machines for sale as a package: - TLG vacuum filling machine -ALCOA capping machine -APV pasteurization equipment -GRAMEGNA shrink wrap machine -ELF EUROPE Duplex oil and water-based filling machine. The machines have not been used since 2004, we just stored them, hoping to start the activity again. The equipment is in excellent condition, only because it has not been used, so it requires maintenance. Sold as a package at this price. 1.INTERPLAST GRAMEGNA SHRINK FOILING MACHINE FOR SALE. Year of manufacture 1998. UE98069, BJ6/1998. It is in very nice condition. We havent used it since 2004, we put it aside until now, just in case we need it again. We used it in our soft drink production plant. Package size: 500×200 mm, max foil width 600 mm. Capacity 8000 pcs/h, sold together with buffer belt and con ...

Unused TGM model E250 Matic fully automatic stainless steel tube filling and sealing machine for Pharmaceutical, Cosmetic, Chemical and Food Industry products. Output Capacity: Upto 3,700 units/hour Metal Tubes: Diameter 10-42mm, Length 50-240mm Plastic Tubes: Diameter 10-50mm, Length 50-240mm Tube print orientation and sensor to detect tube right way up, minimises waste. Fold and roll crimping system for closing metal; polyethylene/laminate tubes sealed by hot air or hot jaws. Integrated ergonomic tube loading system, swings aside for easy access The machine is presently set up with hot air for plastic tubes and there is a brand new wrapped head supplied for aluminium tubes. Additional options included: Stirrer/scraper; Coding stamp; Product level control; Tube orientation system; Water cooler, Pharmaceutical product/data recovery system for recall of batch history  ...

Full Auto Computer Programmable Sewing Machine, Automatic Size Setting At Feeder and Delivery, Auto Signature Feeder with 4 Upper and 4 Lower Opening Heads, Electronic Programs, Commander With Colour Touch-Screen Console, Staggered Stich, Format: Max: 510x320mm, Min: 120x75mm, Signature Max. Thickness: 4mm, Signature Lenght: 120-210mm, Signature Width: 75x320mm, Stiching Lenght: 16,5mm, Max. Mechanical Speed: Max. 200 Cycles/Min., 12000 Cycles/Hour, ASIR Automatic Signature Image Recognition Control System, Belt Delivery

ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...

Awaiting refurbishment at our works in Wellingborough is this BOY 30M machine with Procan controller. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get th ...

#404-850 Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Size: 53 x 74 cm Age: 2004 Imp.: 150 million Location: Europe - CP 2000 - Autoplate - CP Tronic - Image Control - Alcolor Vario - Color Asisstant - Ink Temperature Control - Blanket and Impression Cylinder Wash Up Device - Water cooled - In Production

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:1500 mm y-travel:650 mm z-travel:500 mm table-size:500x2200 mm spindle drive:11 kW max. table load:1200 kg T-slot (width-distance-quantity):20mm x 100mm x 4 spindle taper ISO:50 spindle speed:6-300 1/min, 30-1500 1/min / 2 stufig universal head:360° (manuell schwenkbar) distance spindle center to table:vertikale Spindel: 6? 650 mm distance spindle center to table:horiz. Spindel: 8-660 mm feeds:2.5-3000 /2.5-2500 mm/min rapid speed:6000 / 6000 / 3000 mm/min power of feed servo motor :18/23/18 Nm Overall size:3220 x 2420 x 2800 mm Weight approx.:7300 kg ISO50 end milling tool shank Dia. 27mm:27mm, 1 Stück hand wheels:elektrisch, für alle Achsen screws cover:wegklappbar Features of bed type milling machine ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casti ...

x-travel:900 mm y-travel:650 mm z-travel:450 mm table load:800 kg :1235x460 mm T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:40 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:32 ? 482 mm feeds:X/Y/Z: 10-1000 / 10-1000 /6-640 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:5,5/7,5 kW weight of the machine ca.:4 t machine dimensions LxWxH:1835 x 2362 x 2090 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? Precision-ground ...

x-travel:1200/1500 mm y-travel:700 mm z-travel:500 mm :500 x 1600 mm (Option: 500x2000) mm max. table load:1800 kg T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:50 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:25? 525 mm feeds:X/Y/Z: 10-1000 / 10-1000 / 5-500 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:7,5 kW weight of the machine ca.:5 t machine dimensions LxWxH:2475 x 2260 x 2180 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect  ...