arm used for sale

Engraving milling machine make DECKEL type G 1 LMachine -No: 76301Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 550 x 324 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 250 kgWith- tiltable round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools ...

High-performance column drilling machine Offer number: 17469 Make: ALZMETALL Type: AB 4 SV Machine No: 18498 Built: 1987 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with pre-bedding - Level 1 - 80 - 210 rpm - Level 2 - 210 - 765 rpm - Extension 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - hydr. Feed cylinder for semi-autom. Workflow + Rapid Response - Table with 2 T-slots 720 x 360 mm - height-adjustable via rack with hand crank - max. distance table - drilling spindle approx. 780 mm - maximum distance machined base plate - drilling spindle 1250 mm - Lighting - Coolant device - Swivel arm control panel - Drive 400 V 4 kW - Space requiremen ...

Engraving milling machine make DECKEL type G 1 LMachine -No: 75488Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 550 x 324 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 250 kgWith- round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Engraving milling machine make DECKEL type G 1 UMachine -No: 71012Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 460 x 236 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 225 kgWith- viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

Robot Industrial Robots Kuka KUKA Type: KR60-3 Built: 2016 Control KR C4 Demonstration robots, only 100 hours Kuka media feeder on upper arm Axis 3 (hose package) Range: 2,033mm Weight: 665 kg Payload: 60 kg Software KSS 8.3 Weight: 153 kg Kuka SmartPAD Kuka interconnector: 7m

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Welding robot robot FANUC 100i OConstruction year: 1998 Country of origin: Japan Axis range: J1: +/-165° J2: +135 -75° J3: +150 -149° J4: +/-190° J5: +/-140° J6: +/-320° Max arm area: 1 368 mm Pallet: 850 x 810 mm Power source: OTC Max payload: 6 kg Control: CNC SYSTEM R-J2

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

Model: KR16-06 Year: 2008 Operating Pressure: 150 mbar Design Pressure: 500 mbar Scope of supply: this is fitted to all landfill gas engines as a prefilter before the gas goes into the engine. It removes water and particulate. Kelburn KR16-06 Coalescer Filter Vessel comprising of one off 400mm diameter demister/filter vessel, polyester / borosilicate microglass coalescing filter cartridge, RF flanged inlet, RF flanged outlet, ¾” BSPT (F) tapped drain connection, ¾” BSPT (F) tapped and plugged vent connection. Coalescer Filter Vessel complete with automatic liquid float drainer, differential pressure gauge complete with stainless steel isolating valves, fittings and pipework, sight level gauges, flanged access cover and davit arm and flanged and blanked inspection cover, 1 Complete set of interconnecting pipe work from filter vessels and automatic liquid float draine ...

Soraluce TR1-1600 radial drilling machine. Arm of 1600mm. Drilling capacity in steel: 60mm. Drilling capacity in foundry: 80mm. Boring capacity in steel: 100mm. Boring capacity in foundry: 120mm. Thread capacity in steel: 50mm. Thread capacity in foundry: 70mm. Spindle diameter: 90mm. Travel: 350mm. Taper morse 5. 12 speeds. Motor power: 7,5hp.

spare parts - cook bolinders - pinch roll pivot arm - infeed bottom Feed swivel bracket bottom (front) made of ST Plate 2.2 No. 54

Spot welding machine make DALEX type PMS 11/50 SMachine -No: 9641217 Year of construction 1964Rated power at 50% ED: 50 kVAConnected load: 80 kVAsec. Short circuit power: 23 KAElectrode holding force: 170-510 Kp.Operating current: 9.3 KAProjection: 360 mmDimensions: 1100 x 400 x 1500 mmWeight approx .: 418 kgWith- Electrode arm below- Bump welding table 100 x 100 above- water cooled versionWITHOUT control!used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Very Good Condition MAK 552 Spares 1.CON ROD-8 2.CYLINDER HEAD-8 3.FUEL PUMP-8 4.ROCKER ARM ASSEMBLY-8 5.CRANKSHAFT-1

Robot KAWASAKI ZX165U Built: 2009 Control: CNC 6-axis Max arm area: 2 651 mm Max payload: 165 kg Country of origin: Japan

Welding robot FANUC R-2000iA/165F Built: 2001 Control: CNC R-J3iB 6-axis Max arm area: 2 650 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Combined wood milling machine with crosscut saw make STEHLE type FC 3 BMasch. -No: 12761 Year of construction Nov. 1966Table height: 855 mm4 milling spindle speeds: 3000/6000/5000/10000 rpm.Milling diameter: 30 mmSpindle cone: MK 5Height adjustment of the milling shaft: 115 mmSaw blade diameter: 350 mmSaw blade hole: 30 mmGreen cutting height: 110 mmSaw blade speed: 2800 rpm.Drive power: 3/4 / 2.2 kWDimensions L x W x H: 1910 x 1950 x 1200 mmWeight approx: 880 kgWith- Swing arm roller table 1040 x 460 mm- Footbrake double-sidedused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

Welding robot FANUC S-430iW Built: 2000 Control: CNC R-J3 6-axis Max arm area: 2 643 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Cell with welding robot ABB IRB 1600, table 2 pallets Built: 2006 Control: CNC ABB Country of origin: Sweden Max arm area: 1 200 mm Welding source: KEMPPI 520 R Reading of the welding machine: 520 A

Cell with welding robot ABB IRB 1400, table 2 pallets Built: 2001 Control: CNC ABB Country of origin: Sweden Max arm area: 1 440 mm Max payload: 5 kg Welding source: KEMPPI 520 R Power from the welding source: 520 A

Welding cell with robot ABB IRB 1400 M98, rotary table 2-paltten Built: 1998 Control: CNC ABB Country of origin: Sweden 6-axis Max arm area: 1 440 mm Max payload: 5 kg

TO WHOM IT MAY CONCERN ; WE VE BELOW LISTED USED PARTS OF DEUTZ TBD 645 L CYLINDER HEAD EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( LEFT ) 12PCS EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( RIGHT ) 12PCS INJECTOR HOLDER WITH NOOZLE COOLED TYPE 12PCS AIR STARTER 12PCS FULL ROCKER ARM ASSY 12 PCS PLS REFER ATTACHED PICTURES. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...

Goring Kerr Metal detector Model: DSP2 Serial: 56692 Stainless frame, variable speed, belt dimension 1950mm x 260mm, aperture 350mm x 130mm, pneumatic push arm reject into reject bin, 3Ph

Version Type RKV 4.3 K DK Refrigerant R 407 c Refrigerant charge kg 3.2 Cooling capacity at tw +20°C kW 12,2 Operating pressure max. bar 28 Temperature range Water flow min. °C + 10 Water flow max. °C + 25 Ambient temperature min. °C + 10 Ambient temperature max. °C + 50 Compressor at tc/to=53/15°CZR 61 Number of pcs. 1 Fully hermetic design Nominal power kW 6 Rated current A 9 Rated current max. A 11 Evaporator Plate arm exchanger version Material copper Condenser Air-cooled, axial version Material Cu tube / aluminium fins Fan FB050-VDK.4I.V4S Number of pcs. 1 Axial fan version with blade Nominal power kW 0,8 Nominal current A 1.6 Air flow m³/h 5000 Rated speed n 1290 Electronic version Digital temperature display Switching capacity AC / A 2 Dimensions Width approx. mm 750 Depth approx. mm 1050 Height approx. mm 1100 Weigh ...

Type Bartumb New! MC control maximum load: ± 380 kg with vacuum pump "Busch" Dimensions (L x W x H): ± 2,200 x 2,100 x 2,500 mm stepless speed from 0 to 9 revolutions / minute a variety of products, as all varieties of salads, meat and fish, can be mixed /tumbled with the Bartumb. + With loading arm for standard car 200L

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Technical data : Bandwidth / strip width 1,350 mm Strip thickness / strip thickness 0.4 - 4.0 mm Coil weight 10,000 kg Speed / speed 15 m/min. Coil inners / coil inside 508 mm Coil outer / coil outer- x 1,800 mm Distance ground & reel mpine center / Distance bottom and center of reel mandrel 1,200 mm Imposition ratio / reduction ratio 1:2 Low-return / press arm Deportation sign / push-off sign

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Bosch Turbo Scara SR6 swivel arm robot + controller Rexroth MA4/200-7301-M + RH04.0S Manufacturer: Bosch Tripod Length: Console HubQuill 40025 PN pressure max. 8 bar Load max 8 kg weight 48,5 kg incl. control Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / technical data see picture Since the article is available several times and the robots carry different work tools these are only sample images and may differ. Item condition used (Changes and errors in the technical data, information is reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,0 ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

working width: 1250 mm maximum length of workpieces 3500 mm feed speed 2.4 - 7.5 m / min finishing line consisting of the following elements: - infeed conveyor - brush sander with 4 transversal brusches - brush sander with 2 longitudinal brushes - dust removal with brush and blowers - Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain - 3 lacquer pumps GRACO 015.085 - 7 pumps for color stain GRACO Husky 515 - intermediate conveyor - cross transport with rods and overhead hot air dryer - intermediate conveyor - drying tunnel with IR lamps - UV dryer with 2 lamps - outfeed conveyor

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Drill stand Manufacturer Neuhauser Type Connector 12S1 Year of construction 1999 Table size approx. 1 m x 0.50 m Total height approx. 1.80 m Holder approx. 42-43 mm The drill is not one of them Arm can be swivelled on both sides Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. ...

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

CARRAGARM RACK NEW Data: H : approx. 426 cm D : approx. 137 cm L : approx. 403 cm Cantilever : approx. 120 cm Axial dimension: 131 cm NEW GOODS immediately from stock. 675 kg load per arm 2700 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 4 storage levels (5 storage levels) Shelf consists of: 04 x stand, incl. base approx. 426 cm made of IPE180. 16 x cantilever arms approx. 120 cm made of IPE 100 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pa ...

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...