ampere used for sale

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped  ...

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Charging for forklift battery suitable for 40 cells 80 Volt 40 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version of mobile compact system Fuse 16 Ampere Special accessories trolley Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece  ...

power capacity: 0,38 kW volt: 174 V ampere: 3,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shadmueller Electric motor for steering support from a forklift Still / Wagner Type R100 / 0.4 23.5 volts. 25 Ampere 0.4 KW 2950 rpm Dc motor The engine comes from the steering support of a push-mast forklift. Special price

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 80/190 Power connection 380Volt Power 80 Volt 190 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 131cm Width 55cm Depth 40cm Weight 180kg Ready to use Special price

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 50/80 Power connection 380Volt Power 80 Volt 50 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 110cm Width 55cm Depth 40cm Weight 80kg Ready to use Special price

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

Stationaere welding smoke extraction with 1500m3/h suction suction systems and added cyclon dust separator Aspirator: Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Series 2355 Type SP-15 1500m3/h 2050 mm/WG 380 Volt 34 Ampere 18.5KW Filter Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Type SF-1500-G Filter Strainer system can be used immediately. Special price

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

Iveco emergency generator 190 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 335 x 116 cm - Weight: 1980 kg - Tank volume: 400 liters - Sound level: approx. 67 dB (7m) - Consumption: 18.6 l/h (50%) / 27.9 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 175 / 192 kVA - in soundproofed housing - with digital control - integrated frame tank - Battery -  ...

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price

Iveco emergency generator 135 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 125 / 138 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1470 kg - Tank volume: 290 liters - Sound level: approx. 68 dB (7m) - Consumption: 14.4 l/h (50%) / 20.2 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 125 / 138 kVA - in soundproofed housing - with digital control - Tank - Battery - Exhaust / silencer - - - -  ...

Iveco emergency generator 100 / 110 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1390 kg - Tank volume: 290 liters - Sound level: approx. 66 dB (7m) - Consumption: 12.5 l/h (50%) / 17.6 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco gener ...

Compressor, 8 bar, Worthington - Creyssensac - used - : Price: 3.500.-€ (net), dismantled and loaded Manufacturer: Worthington - Creyssensac Type: RL R 5000 AX2 Year of construction: unknown - could be 2000 Operating hours: unknown - still to be clarified Bar max: 8 m3/h: 395 KW: 37 V/ Ph/Hz: 400/3.0/50 64 Ampere min-1: 3,000 kg: 790 Condition: good

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...