We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,992 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
The winder is part of a cast film system and is in good condition. Max. foil width = 2350 mm Max. roll width at inlet = 2600 mm, Max diameter roll = 980 mm Sleeve size 3", 6 Film thickness= 15 – 200 my, Max. speed = 250 m/min Edge trimming with razor blades, The winding can be in contact or gap Automatic loading of 3 inch sleeves from the sleeve magazine. Automatic unloading of the finished roll by means of a robot.
used
Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a resonable mechanical condition but with almost new controls with frequency converter (renewed in 2020 by Elesto Austria with new Siemens S7-1200 PLC, touchscreen panel and CE declaration). The format on the machine is stick pack 100 and 250 gram, 100 x 37 x 30 / 75 mm, side folding. The butter is feed with an aluminium through with aluminium augers. Stainless steel dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter. Outfeed conveyor of 150 cm. Semi automatic case packer Benhil 8538 (year 1976, serialnumber: 538/1) for 2,5 kg boxes wi ...
used
BOBST SP 76 BM FOILMASTER FROM 2004 – AUTOMATIC HOT FOIL STAMPING Manufacturer: Bobst S.A. Switzerland Type: SP 76 BM Year of production: 2004 Max. Sheet size: 760 x 560 mm Min. Sheet size: 300 x 260 mm Mechanical Max. Speed: 7000 Sheets /hour Embossing and die cutting Distance between front edge of sheet and embosing die: 14-22 mm Gripper Margin: 9-17 mm Force: Adjustable stamping up to: 1.6 MN Heatable Beam: Adjustable temperature: 50-160 °C Zones individually controlled: 12 Category: Die Cutter - Automatic
used
Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect In production - Can be test
used
halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC50040/450 Year 1995 - Serial-No. TE 3.95.053 Frame Size: 500 x 400 mm Foil: ca. 12-80ym Tunnel h/w: 400/450 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine MAF WS2-St500 Year 1989 - Serial-No. 24 08689 Mobile on mobile frame After sealing - automatic transport into tunnel -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Folienschneider / Foil Cutter Griesinger FS70 Arbeitsbreite / Working width max. 700mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra M Year 2002 - Serial-No. 21037 Produktabmessungen / Product sizes Abmessungen der Schweissleisten (LxB) 540x390mm Produktionsleistung 300Produkte/Std. / Production 300pcs/h Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V) -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Hot Foil Stamping Tiegel Heidelberg GTP Year 1957 Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehoer und Schliessrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Max. profile height: 400 mm Max. profile width: 250 mm Max. insulating web spacing: 300 mm Without roller conveyors
used
Heissfolienpraegemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 67204 Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
KRONES Variopac TFS Year of manufcturing: 2021 Nominal voltage: 400/230 Current System: AC 3/N/PE Frequency: 50 Hz Full load current: lb max 289 A Short-circuit srenght: lcc 55 kA Min. Short-circuit srenght: lk min 0,84 kA Pre-fuse: 400 A 0,25l Slim-Can 2x2er Shrink im 24er Tray with film stretch 3x2er Shrink im 24er Tray with film stretch 4x2er Shrink im 24er Tray with film stretch 0,33l Sleek-Can 3x2er Shrink im 24er Tray without film stretch 0,15l Slim-Can 2x2er Shrink im 24er Tray without film stretch 3x2er Shrink i ...
used
Vollautomatische Einschweissmaschiene mit Einschweisstunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...
used
Professional packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement by manual release. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. -Tunnel opening approx. 550 x 300 mm. -Hot air flows in the tunnel mechanically adjustable. -Maximum package dimensions approximately: 550 mm x 300 mm. -Maximum film roll width approx. 600 mm. -Perforation of the foil possible via 2 adjustable needle rings. -Machine with castors movable and lockable. -400 V / 7 KW. Setting options on the display: -Tunnel temperature. -Welding time. -Transport time of the conveyor belt. -Transport speed of the roller chain. Dimensions set-up approximately: length 2.5 x width 1.1 x he ...
used
Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...
used
Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...
used
Used Polystar 620 DSM Continuous Welding Machine for mounting on roller conveyor or conveyor belt. Model 620 DSM = 12 mm weld width / wave embossing Continuous welding machine with right or left inlet For mounting on roller conveyor or table transport conveyor. The new price was €2,700 To be sold for 990,- € net. Special price due to warehouse clearance in 51688 Wipperfürth.
used
Semi-automatic labeling machine for applying 1 label to cylindrical containers | (in French) is a semi-automatic labeling machine for self-adhesive labeling of cylindrical products such as wine and beer bottles, cans, jars, jars, bottles of hydro-alcoholic gels, oral care products, etc. Equipped with a labeling station, it can apply a label to a wide range of formats and components (glass, PET, PVC). Equipped with a labeling station, it can apply a label to a wide range of formats and components (glass, PET, PVC). Its adhesive labeling output can reach up to 10 products/minute (i.e. 600 bottles/hour). Used in a wide variety of sectors, including viticulture, brewing, food processing and cosmetics, this semi-automatic labeling machine is highly versatile. The machines appeal lies in its ease of use, efficiency, excellent value for money and, above all, its robustness (very few c ...
used
max. format 50 x 70 cm Built in 1952 Hot foil embossing device HAKRO Computer control with digital display 2 heating zones Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
Description: various sizes, more details: see photos Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,400 mm, weight approx.: 450 kg
used
Description: power 150 W Approx. Onsite Dimension. (l x w x h): 300 x 150 x 60 mm, weight approx.: 0,5 kg
used
Formats: PET bottles: 6 x 1,5 l; 6 x 0,7 l; 12 x 1 l; 6 x 0,5 l Glass bottles: 6 x 0,7 l Tray /cardboard + shrink foil Installed power: 65 KW Voltage: 400 V, 50 Hz Connection: 3f+N Nominal capacity: 40 packages/ min. Max. capacity at the format 6 x 0,7 l: 9300/h bottles Air: Operation pressure: 6 atmospheric pressure Consumption: mc./hr. 300 l/min. More then 300 machines new and second hand on our seema .de
used
Ring winder Böhl Foil Winding Machine Wrapping Machine Type S 1200 VAFM Year of construction 2013 Working length 400 – 2500 mm Working width 200 – 700 mm Working height 20 – 200 mm max. passage width without winding 1000 mm Transport speed 5 – 20 m/min. approx. 1 – 2 m roller conveyor in front of and behind it Operation via Siemens touch panel
used
Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is German Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Additional features:, Excluding:, - Datecoder., Type of Machine: Butter Packaging Machine, Capacity: ± 750 Kg/h, Capacity (Units): up to 50 packages per minute, Packaging Weight: 250 gram, Packaging Size: 100 x 75 x 35 mm (German standard), Packaging type: Bo ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt (outfeed conveyor itself excluded). The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, ...
used
Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt (outfeed conveyor itself excluded). The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, ...
used
Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...
used
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt. The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, to control the exact position of th ...
used
Used IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be pack ...
used
New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...
used
new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...
WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM
Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...
Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt
used
the 200l barrel original is locked
new
Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...
used
Aluminium profile, connection profile, Einschiebeprofil 96 x 15 x 1000 mm New condition Price per piece: 6,00 348 STK. in stock
new
Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...
Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt
used
800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request
new
Technical data:- Cutting length horizontally 4000 mm - cutting height vertical 2000 mm - cutting depth 30 mm - saw blade diameter 250 x 30 mm - speed main saw blade 5800 rpm speed cracksaw blade 7800 ppm motor 3.0 kW / 400 V - suction nozzle 100 mm - twist-free, free-standing machine frame - Installation dimensions L=5000,W=1150, H=2980 mm - weight 665 kginclusive:- V-slot device for composite panels - Digital display for horizontal cuts- Digital display for vertical cuts- automatically evasive slat slat - transport rollers- continuous small part support - strip stop
used
Glass fibre stub (non-conductive) with aluminium frame, Sheet made of non-conductive fibre glass fiber composite, Entrance door for high-voltage penitohouse, heavy, stable emitting, with lueftunggitter, lockable, a total of 5 stubs available, unused. The luefting grid could be replaced, for example, by a disc. Installation example according to photo 3. Dimensions: width 1300mm Height 2120mm N7eaerb7 New price 1,500.-EUR / pc. Sales price per piece or gladly as a total package against bid Special price
new
Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...
new
Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...