We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,445 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Protection level: 4 - 12 M Power supply: 2 x CR2032 weight: 460 Gramm dimensions: 250 x 270 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
mechan. Oil Mist Separators - Volume flow: up to 1200 m³/h - Electrics: 3-Ph. 400 V - 50/60 Hz - Power: 1.5 kW (IE3) - Current: 2.3 A - Protection class: IP54 - Noise: 70 dB
new
number: 31 Positionen weight: 35 kg 6 pcs. Screw clamps 10 pcs. Quick-clamping bolt 2 pcs universal stop 100mm 4 pcs. Universal stop 150mm 2 pcs. Universal stop 225mm 2 pcs. Stop and clamping angle 175mm 2 pcs. Prisms 60mm 1 pc. Burner holder 2 pieces of separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 29 Positionen : 16 mm condition: neu weight: 11 kg Set 1 29 pieces, 16mm system, consisting of: Clamps: 4 x 160610 Bolt: 12 x 160511 Stop: 4 x 160420.N Angle: 4 x 160108.N Angle: 4 x 160110.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 33 Positionen weight: 52 kg condition: neu : 28 mm Set 1: 33 pieces, 28mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolt: 12 x 160511 Stop: 4 x 280410.N Stop: 4 x 280420.N Angle: 2 x 160110.N Angle: 2 x 280152.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening ston ...
new
clamping range of chuck: 80 - 280 mm height: 67,5 mm daylight: 100 mm external diameter: Futter 300 mm external diameter: Spannhebel 480 mm weight: 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 57 Positionen weight: 98 kg condition: neu : 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 31 Positionen : 22 mm condition: neu weight: 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Protection level: 9 - 13 M Power supply: 2 x CR2032 3V weight: 460 Gramm dimensions: 250 x 270 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 55 Positionen : 16 mm condition: neu weight: 23 kg Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
new
conveying height: 2,5 Meter coolant capacity: 8,0 l/min 0: 11,0 ltr. motor: 400 Volt range L-W-H: 370 x 245 x 170 mm Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 50 mm Wheel width: 300 mm height adjustment: 480 - 530 mm weight: 52 kg dimensions of the machine ca.: 420 x 400 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 40 mm Wheel width: 275 mm height adjustment: 500 - 570 mm weight: 20 kg dimensions of the machine ca.: 360 x 300 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...
new
Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...
used
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
used
SECOND-HAND STAINLESS STEEL COMPRESSED AIR MULTIVAL VALVE BOILERS REF#: C9478 Multivalvula compressed air boilers made of stainless steel of different sizes.
used
accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022
used
For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t
used
Technical data Nominal volume flow: 630 m3/h Max. inlet temperature: 70 °C Machine´s weight about: 94 kg Dimensions: Length: 625 mm Width: 555 mm Height: 975 mm
used
used
Technical data Table length: 800 mm Table width: 700 mm
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm MACH-id 3751 MAKE Walter Eckold TYPE KF 665 GIGANT YEAR 90 er DIMENSIONS Length 2400 mm Width 1000 mm Height 2200 mm Stoke´s 150 - 300 - 600 Adjustable ram 0 - 80 mm Forming capaity steel 6 mm Forming capacity alu 8 mm
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Picolo Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Pneumatic 2 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 460 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 330 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 665 Gigant Kraftformer
new
Filters for AD Access - New - Prefilter (A1030153) for AD-Access Article-No. MA-201050
used
Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price
used
Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator -Manufacturer: Siemens, servomotor -Type: SQN30.402A2730 -Dimension box: 155/115/85 mm -Weight: 0.7 kg
used
Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens, air damper actuator -Type: SQM33.511A9 -Dimension box: 190/180/H120 mm -Weight: 1.6 kg
used
Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece
used
Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm -Number: 7 pieces -Price: complete
used
Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete
used
Circular Saw - Feed Unit Make EISELE Type SU 073Fabr. -No: 0739 built in 1988Max. Feed length: 920 mmBaking height: 65 mmOpening width of the vise: 200 mmDimensions: 1350 x 900 x 1150 mmWith- double repeating deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Height adjustable roller conveyor make TRANSLYFT type TLH 2500Machine -No: 000290 Year 1990Roller conveyor width: 400 mmRoller conveyor length: 6000 mmSupport table size: 800 x 6000 mmLoad capacity: 2.5 tDimensions L x W x H: 6000 x 800 x 1000 mmWith- 4 built-in scissor lift tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Cabinet with tools for honing machine make NAGELCabinet size: 750 x 520 x 1460 mmNumber of drawers: 24Content consisting of- Honing tools- Recordingsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools